Most popular

How do you unlock the radio on a Chevy Silverado?

Table of Contents

How do you unlock the radio on a Chevy Silverado?

Jot down the four-digit number with which you will be provided twice. You can turn off the ignition while you make the call. You should once again see “LOC” on the radio screen. Using the hour and minute buttons on your radio control, enter the phone code to unlock your radio.

Do you have to pay to unlock a GMC radio?

The downside of the Theftlock system is that if your battery dies or becomes disconnected, you’ll need to enter the radio code to deactivate the Theftlock system. You don’t need to special tools or to pay to unlock your Theftlock protected radio. Here are the simple and easy steps to unlock your Chevy or GMC radio. You’ll need a pen and paper.

What kind of radio does a Chevy Silverado have?

This article applies to the Chevrolet Silverado 1500 (2007-2013). The radio in your Chevrolet Silverado 1500 is equipped with an anti-theft system that works by ensuring the audio system functions only when it is installed in the original factory model, which is confirmed using an authentic vehicle identification number (VIN).

What to do if your GMC radio says INOP?

If radio display reads “INOP” while the vehicle is on, too many incorrect radio codes have been entered. To remove “INOP” from your display and unlock your radio, you must leave the key in the On position for one hour. Once you’ve retrieved your radio unlock code, write it down for future use.

How to unlock your Chevy or GMC radio?

How to Unlock a Chevy Radio. Step 1: Start the vehicle and turn on the radio. Step 2: Press and hold preset numbers 2 and 3 until a three digit code appears on the radio display. Write this code down. Step 3: Press the AM/FM button. Your radio will display a second three digit code. Write the second code down.

How to reset radio that shows as locked on a 2004 Chevy?

Turn the radio on by pressing the “power button” on the radio console. Wait until the radio flashes “CODE” on the display screen. Press in the code on the radio console number pad. Wait for the display screen to stop reading “CODE” and return to a normal display. This will reset the radio and allow you to use it once again.

What happens if I remove the radio from my Chevy Silverado?

If the radio is removed from your vehicle, it will not power on; however, some lights might appear. If you’ve removed your radio to complete a repair or interior modification and now need to unlock it, the good news is you can do so without necessarily needing to visit a local garage or Chevrolet dealership.

How do you reprogram a Chevy Silverado stereo?

The dealer will reprogram your stereo based on the year, make and model of your truck. Your dealer will need to retrieve your regular production option (RPO) codes, as well as confirm whether your truck is equipped with a rear camera or speaker package.

Press the power button on your radio for several seconds to unlock the system. If this doesn’t work, pull your vehicle’s codes by pressing and holding presets 2 and 3 for 10 seconds. Write down the 3-digit code that displays on the screen.

Why is the radio locked on a 2004 Chevy?

The radio on your 2004 Chevy uses a radio lock that engages whenever you cut power to the radio. This feature helps to protect the radio from being used if it is ever stolen. In this respect it acts as a theft deterrent.

How do you reset a locked GM TheftLock radio?

This is the most common code used by GM personnel to reset locked Theftlock radios. Key in each number carefully, then hit the # sign to send your request through. Under normal circumstances, a locked Theftlock radio must be reset by a licensed GM dealer, who uses a special code known only by dealership personnel.

Jot down the four-digit number with which you will be provided twice. You can turn off the ignition while you make the call. You should once again see “LOC” on the radio screen. Using the hour and minute buttons on your radio control, enter the phone code to unlock your radio.

What happens if I Lose my Chevy radio?

The thinking is simple: even if a crook were to steal the radio, it would be useless to that person since without the unlock code from the manufacturer, the radio cannot be operated. Unfortunately, this means that if you lose the radio code, you will need to have your radio reset by a General Motors dealership.

The downside of the Theftlock system is that if your battery dies or becomes disconnected, you’ll need to enter the radio code to deactivate the Theftlock system. You don’t need to special tools or to pay to unlock your Theftlock protected radio. Here are the simple and easy steps to unlock your Chevy or GMC radio. You’ll need a pen and paper.

How do you reset a locked GM radio?

Under normal circumstances, a locked Theftlock radio must be reset by a licensed GM dealer, who uses a special code known only by dealership personnel. By entering the code yourself, you can avoid the trouble and expense of paying to have your vehicle’s radio unlocked at the dealership.

How do you unlock the radio on a Chevy?

How to Unlock a Chevy Radio Step 1: Start the vehicle and turn on the radio. Step 2: Press and hold preset numbers 2 and 3 until a three digit code appears on the radio display. Step 3: Press the AM/FM button. Step 4: Call the Chevy Radio Code phone line at 1-800-537-5140.

Why does my Chevy Silverado have a locked radio?

This article applies to the Chevrolet Silverado 1500 (1999-2006). Your Chevy Silverado 1500 is manufactured with a theft-deterrent system that is designed to cause your radio to become locked should you or someone else attempt to tamper with or remove it from your truck.

If radio display reads “INOP” while the vehicle is on, too many incorrect radio codes have been entered. To remove “INOP” from your display and unlock your radio, you must leave the key in the On position for one hour. Once you’ve retrieved your radio unlock code, write it down for future use.

How do you put a three digit code on a car radio?

Step 1: Start the vehicle and turn on the radio. Step 2: Press and hold preset numbers 2 and 3 until a three digit code appears on the radio display. Write this code down. Step 3: Press the AM/FM button. Your radio will display a second three digit code.

Why is my Chevy TheftLock radio not working?

The radio display will read “LOC” and the device will not turn on. Whenever your Chevy battery is disconnected or the battery dies, the Delco Theftlock radio enters the “LOC” mode. Follow these steps and you can reset the anti-theft radio and return the radio to a working state.

What are the buttons on a GM radio?

FACTORY REFURBISHED WITH A BRAND NEW CD MECH, BRAND NEW LAMPS, AND BRAND NEW BUTTONS :

What kind of radio wire is in a 2003 Tahoe?

2003 Chevrolet Tahoe Radio Wiring Diagram Application Wire Color Car Radio 12V+ Battery Constant Wire Orange Car Radio 12V+ Ignition Switched Wire Class 2 Serial Data Car Radio Ground Wire Black/White

Is there a wiring diagram for a Chevy Tahoe?

Feel free to use any Chevrolet Tahoe car stereo wiring diagram that is listed on Modified Life but keep in mind that all information here is provided “as is” without any warranty of any kind and most of the car audio wiring diagrams listed on our enthusiast website are submitted by the Modified Life community.

This is the most common code used by GM personnel to reset locked Theftlock radios. Key in each number carefully, then hit the # sign to send your request through. Under normal circumstances, a locked Theftlock radio must be reset by a licensed GM dealer, who uses a special code known only by dealership personnel.

Where can I find the radio code on my Chevy?

Get in touch with your vehicle’s manufacturer ASAP. You’ll find the number in the owner’s manual or on the Chevrolet website. Talk to the support team, and they’ll connect you with a specialist who can locate your radio code. Enter your vehicle’s code to unlock the stereo.

How do I unlock my GM TheftLock radio?

Unlocking your Theftlock radio will require you to enter a unique 4-digit numerical code. Before you can do this, however, it will be necessary to write down two separate 3-digit numbers, which you’ll get by punching a series of buttons on the radio’s interface.

Is it possible to unlock a GM RDS radio?

Tip: If the letters “RDS” appear on the display, it won’t be possible to unlock your radio yourself, as GM doesn’t offer retrieval codes for RDS radio units. In this case, you’ll need to visit a licensed GM dealership to have them reset your radio manually.

Get in touch with your vehicle’s manufacturer ASAP. You’ll find the number in the owner’s manual or on the Chevrolet website. Talk to the support team, and they’ll connect you with a specialist who can locate your radio code. Enter your vehicle’s code to unlock the stereo.

This article applies to the Chevrolet Silverado 1500 (2007-2013). The radio in your Chevrolet Silverado 1500 is equipped with an anti-theft system that works by ensuring the audio system functions only when it is installed in the original factory model, which is confirmed using an authentic vehicle identification number (VIN).

Where can I get a 2007 Chevy Silverado owner manual?

Canadian Owners A French language copy of this manual can be obtained from your dealer/retailer or from: Helm, Incorporated P.O. Box 07130 Detroit, MI 48207 Litho in U.S.A. Part No. 25817255 A Second Printing©2006 General Motors Corporation. All Rights Reserved. 3 How to Use This Manual

What’s the name of the company that makes the Chevy Silverado?

This manual includes the latest information at the time it was printed. We reserve the right to make changes after that time without further notice. For vehicles first sold in Canada, substitute the name “General Motors of Canada Limited” for Chevrolet Motor Division whenever it appears in this manual.

When did the Chevy Silverado 1500 come out?

Please try again later. The Chevrolet Silverado is a full-size, heavy-duty pickup that has been around since 1999. They are the workhorses of the Chevy line and to keep your truck running its best, it is always a good idea to do all the recommended maintenances.

Press the power button on your radio for several seconds to unlock the system. If this doesn’t work, pull your vehicle’s codes by pressing and holding presets 2 and 3 for 10 seconds. Write down the 3-digit code that displays on the screen.

Is the Chevy Silverado a trademark of General Motors?

GENERAL MOTORS, GM, the GM Emblem, CHEVROLET, the CHEVROLET Emblem, and the names SILVERADO and Z71 are registered trademarks of General Motors Corporation. This manual includes the latest information at the time it was printed.

Do you need a code to unlock your car stereo?

If you own a vehicle, you may find that the audio systems are equipped with an Anti-theft or radio code feature that requires a special “security code” to unlock your radio. This radio unlock code is not required for normal operations. It’s purpose is to deter a potential thief from removing the stereo.

Step 1: Start the vehicle and turn on the radio. Step 2: Press and hold preset numbers 2 and 3 until a three digit code appears on the radio display. Write this code down. Step 3: Press the AM/FM button. Your radio will display a second three digit code.

If you own a vehicle, you may find that the audio systems are equipped with an Anti-theft or radio code feature that requires a special “security code” to unlock your radio. This radio unlock code is not required for normal operations. It’s purpose is to deter a potential thief from removing the stereo.

Where do I find the radio unlock code?

In order to obtain your radio unlock code, you need to find your radio’s serial number. You can get the radio serial number directly from your radio. Step 1: Turn on the ignition. Turn the key to “accessory” mode or “on” mode.

When do you need a Chevy radio code?

Most vehicle stereo systems come with anti-theft protection. There might be times where you need to know how to unlock a Chevy theft lock radio, which we can help you with. The need for a radio code reset or retrieval usually happens after the battery dies, and the radio is disconnected or removed during service.

How do you get the radio unlock code on a Chevy?

Now that you’ve obtained your Chevrolet radio unlock code, you need to enter it into your radio. Step 1: Switch on the radio. Turn your ignition on and press the radio power button. Step 2: Enter the first two digits of the radio unlock code.

Turn the radio on by pressing the “power button” on the radio console. Wait until the radio flashes “CODE” on the display screen. Press in the code on the radio console number pad. Wait for the display screen to stop reading “CODE” and return to a normal display. This will reset the radio and allow you to use it once again.

Where do I find the serial number on my Chevy radio?

Press the AM/FM button and a new code should populate. Write this number down next to the first set and you’ll now have a six-digit code––a.k.a. the radio’s serial number. There are tons of online manuals for sale as well as guides that can teach you how to access and decipher GM radio codes.

What to do if your car radio is locked?

Start your vehicle like normal, or turn the key until it’s in the “On” or “Accessory” position. Then, press the power button on the radio’s volume dial to turn on the radio. The digital display will read “LOC” if the radio is locked.

What causes a GM radio to lock up?

Take your car to a qualified GM mechanic or car radio technician to have them diagnose the source of the problem. GM Theftlock radios are designed to lock up automatically when the vehicle’s battery dies or becomes disconnected, though an electronic malfunction could also cause the Theftlock function to activate.

What is the unlock code for a GM car?

Press “106010” followed by the “#” sign. This is the most common code used by GM dealers. If it doesn’t work, try using any of the following access codes: 139010, 202108, 206053, or 620529. Step 3: The automated operator will give you the four-digit unlock code.

Most vehicle stereo systems come with anti-theft protection. There might be times where you need to know how to unlock a Chevy theft lock radio, which we can help you with. The need for a radio code reset or retrieval usually happens after the battery dies, and the radio is disconnected or removed during service.

How do you change the radio on a Chevy truck?

Pressing buttons two and three. Make an appointment to have your local Chevrolet dealer program your radio using the Pass-Through programming system. The dealer will reprogram your stereo based on the year, make and model of your truck.

How to reset an anti-theft radio on a Chevy?

Press the “AM/FM” button until “SEC” appears on the radio display. Press the “ON” button on the radio. The radio is now reset. Press the “Minute” and “Hour” buttons slowly until the security code matches. Going too fast may cause you to skip over the correct numbers of the security code. Store your radio security code in a safe place.

The radio display will read “LOC” and the device will not turn on. Whenever your Chevy battery is disconnected or the battery dies, the Delco Theftlock radio enters the “LOC” mode. Follow these steps and you can reset the anti-theft radio and return the radio to a working state.

Unlocking your Theftlock radio will require you to enter a unique 4-digit numerical code. Before you can do this, however, it will be necessary to write down two separate 3-digit numbers, which you’ll get by punching a series of buttons on the radio’s interface.

What happens to a GMC radio if battery dies?

Chevy and GMC vehicles both feature Theftlock radios which render the stereo inoperable to would-be thieves. The downside of the Theftlock system is that if your battery dies or becomes disconnected, you’ll need to enter the radio code to deactivate the Theftlock system.

Where to find the GM RDS radio serial number?

Try locating the radio serial# by using the radio serial# retrieval procedure located at GM code retrieval Section 1.a below.. If your radio does not indicate a set of numbers on the display using this procedure and is a 2003-up, the vehicles radio MAY have an RDS radio. About the theftlock RDS radio system .

Do you need a code for a RDS radio?

Serving the industry since 1998. Many General Motors RDS vehicles come equipped with radios that require a special security unlock code. This radio code is not required, unless the radio is removed from the vehicle, or the vehicles battery is disconnected.

Try locating the radio serial# by using the radio serial# retrieval procedure located at GM code retrieval Section 1.a below.. If your radio does not indicate a set of numbers on the display using this procedure and is a 2003-up, the vehicles radio MAY have an RDS radio. About the theftlock RDS radio system .

Serving the industry since 1998. Many General Motors RDS vehicles come equipped with radios that require a special security unlock code. This radio code is not required, unless the radio is removed from the vehicle, or the vehicles battery is disconnected.

How to install a stereo in a Chevy Silverado?

If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. Do it yourself Bri is a channel committed to providing quality instructions and how to videos for a vast array of DIY projects.

How do you remove a GMC Sierra Radio?

Thanx. Remove the trim piece around the radio by pulling on it the whole piece will come off. If you have an automatic you have to shift to first gear and tilt the steering column all the way down. then, you will have to remove the radio by pressing the 2 clips down on each side of the radio the radio will slide out.

What kind of radio does a GMC Canyon have?

You have no items in your shopping cart. GMC Chevrolet 07-13 Truck Van AM FM Radio UM7… 2003-2004 GMC Canyon Chevrolet Colorado Humme… Chevy GMC 07-10 Truck Radio AM FM 6 Disc CD m…

What kind of radio does a GMC Hummer have?

GM Delco 1988-1994 Chevy GMC Truck Mounts Bra… 1999-2002 Cadillac Chevy GMC Oldsmobile 6 Dis… 2010-2012 Buick Chevy GMC Radio AM FM CD DVD 2015-16 Chevrolet Express GMC Savana Radio AM… Unlocked 2010-2012 GMC Acadia OEM Radio AM FM… 2007-14 Cadillac Chevy GMC Hummer Roof Mounte…

Thanx. Remove the trim piece around the radio by pulling on it the whole piece will come off. If you have an automatic you have to shift to first gear and tilt the steering column all the way down. then, you will have to remove the radio by pressing the 2 clips down on each side of the radio the radio will slide out.

What kind of radio do I need for a 2006 Chevy?

FITS MANY 2006-2007-2008-2009-2010-2011-2012-2013 CHEVY / vehicles. This is for the newer body style vehicles (2006/2007). If you don’t have the large volume knob in the middle of the radio this will not work in your vehicle.

How do you find the code on a Chevy stereo?

Enter the anti-theft or unlock code that is on the anti-theft card. Then press the tune button on the Chevy stereo system. The display will go from showing “CODE” to a static screen. Press the button to sift through available digits and then repeat the process.

Pressing buttons two and three. Make an appointment to have your local Chevrolet dealer program your radio using the Pass-Through programming system. The dealer will reprogram your stereo based on the year, make and model of your truck.

Is there a way to unlock a Chevy truck without keys?

You might think twice about parking it on the questionable sidestreet now. Instead of learning how to unlock a Chevy truck without keys, you can get a magnetic box and put a hide-a-key somewhere on the outside of your vehicle. Just be sure to wedge it in a spot where it won’t be easily found or fall off when driving.

Why does my Chevy Silverado lock and unlock?

2 people found this helpful. While driving my 2009 Silverado just started doing the same thing with the door locks. When the door locks start acting up the shift indicator flies back between Park and drive. The vehicle loses power and transmission shifts funny with all kinds of lights coming on on the dash.

What kind of radio does Silverado 1500 have?

I have a 2005 Silverado 1500 WT Extcab 4×4 that came with the basic AM/FM stereo. Found a 6 Disc AM/FM stereo that came out of a Avalanch. Radio powers up but shows “Locked”. No surprise that it is equiped with anti-theft.

When does a GM TheftLock radio lock up?

If you own a late ‘90s or early 2000s model General Motors vehicle, you may have found out the hard way that your factory Theftlock radio is programmed to lock up if there’s any disruption in the battery.

Where can I find the VIN number on a Chevy Silverado?

The VIN also allows a user to get a build sheet of Chevrolet SILVERADO. Please check Chevrolet SILVERADO car parts catalog for additional information if you’re looking for parts to repair your vehicle. You can search Chevrolet SILVERADO parts by VIN number . It is possible to get market price of new or used Chevrolet SILVERADO by VIN number.

Where are the trouble codes on a Chevy Silverado?

Using an on-board diagnostics tool, read the trouble codes stored in your vehicle. Connect your diagnostics tool to your vehicle’s diagnostics plug, which is located on the driver’s side (underneath the steering wheel). Read the codes.

How to disarm an anti theft lock on a Chevy Silverado?

Chevrolet Silverado: How to Disarm Anti-Theft Lock. 1 Step 1 – Unplug the battery. Pop the hood of your truck to remove the battery. This should be as simple as removing the cables from your battery 2 Step 2 – Lock all doors. 3 Step 3 – Check for trouble codes. 4 Step 4 – Visit your local dealer.

The VIN also allows a user to get a build sheet of Chevrolet SILVERADO. Please check Chevrolet SILVERADO car parts catalog for additional information if you’re looking for parts to repair your vehicle. You can search Chevrolet SILVERADO parts by VIN number . It is possible to get market price of new or used Chevrolet SILVERADO by VIN number.

Using an on-board diagnostics tool, read the trouble codes stored in your vehicle. Connect your diagnostics tool to your vehicle’s diagnostics plug, which is located on the driver’s side (underneath the steering wheel). Read the codes.

Press the “AM/FM” button until “SEC” appears on the radio display. Press the “ON” button on the radio. The radio is now reset. Press the “Minute” and “Hour” buttons slowly until the security code matches. Going too fast may cause you to skip over the correct numbers of the security code. Store your radio security code in a safe place.

How to reset Chevy Silverado 1500 emission monitors?

Do not brake or shift in order to slow down. It is important to let your Silverado coast along gradually slowing down to 20 mph. The ECU will once again self-test the EGR System, EVAP Purge System and Long Term Fuel Trims. F. Accelerate: Accelerate again at 3/4 throttle until 55-60 mph is reached.

What do I need to Reset my Chevy Silverado computer?

While doing the process of rebooting the computer, you will need the OBD II car code reader. For noting down the code, you may need a pen and a piece of paper. While buying and resetting your Chevy Silverado’s computer, there are chances that so many questions come into your mind.

Author Image
Ruth Doyle