How do you turn the key on a skidsteer?

Turn the key start switch to the START position. Note: Two people will need to perform this procedure. One person will need to sit in the seat with the armrest down holding the key start switch in the START position. Measure the voltage across the start relay coil from wire 306-GN to 202-BK.

Why does my starter not turn when I turn the key?

With the key in the start position you should see about 12V on the small wire. If you have the 12v at that wire the solenoid is the most likely fault. If you don’t have 12v at the small wire, you need to get a wiring diagram for the truck. You then have to follow the circuit back to find out where you do have 12v and where it stops.

Why does my cat 246 skidsteer not start?

This is only for early machines and can be different with higher serial number machines. The engine will not crank when the key start switch is in the START position. Test Step 1. CHECK ARMREST INDICATOR

What to do if your skid steer won’t start?

If you have a not light, no crank issue, here is now to find the problem. The engine will not crank when the key start switch is in the START position. Test Step 1. CHECK ARMREST INDICATOR Occupy the seat. Lower the armrest. Turn the key start switch to the ON position. Check the status of the armrest indicator and the parking brake indicator.

How to check the skid steer loader battery?

CHECK THE VOLTAGE AT THE STARTING MOTOR Locate wire 304-WH on the starting motor. Turn the key start switch to the START position. Note: Two people will need to perform this procedure. One person will need to sit in the seat with the armrest down holding the key start switch to the START position.

How do you turn the key on a skidsteer?