How do you reset the TPMS on a Dodge Caravan?
How do you reset the TPMS on a Dodge Caravan?
First You need to make sure all the tires are at the recommended tire pressure then turn the vehicle off and wait for about 20 minutes. Next drive it above 15 MPH for at least 10 minutes to 35 minutes then turn it off and back on again.
What causes a Chrysler minivan to not start?
Shorts in the CMP and crankshaft position sensor are COMMON. If all of those tests check out, check fuse #23 in the Integrated Power Module. That fuse powers several other components. The leak detection pump is a known problem that will short and kill the entire circuit.
How many miles does a 97 Dodge Grand Caravan have?
Hi everyone, I got a new problem with my friends 97 Dodge Grand Caravan. First off, it has the v6 3.3 in it with about 194,000 miles on her. OK, now onto my problem. It all started yesterday morning.
Why does my minivan make strange noises when I crank the engine?
The crank sensor sounds likely. These engines have both a cam AND crank sensor, and rely on both to run. You said it backfired…any strange noises when cranking? These vans have a problem with the flex plate cracking and breaking. There is a large washer on each side of the flex plate where it is mounted to the crankshaft.
What kind of crank sensor does a Chrysler minivan use?
It has the 4.0 inline 6 and uses the same style of crank sensor mounted to the outer transmission bellhousing. It ended up being a bad crank sensor. It’s basically just a magnetic pick-up, so you could check the wires for continuity.
Shorts in the CMP and crankshaft position sensor are COMMON. If all of those tests check out, check fuse #23 in the Integrated Power Module. That fuse powers several other components. The leak detection pump is a known problem that will short and kill the entire circuit.
How can I tell if my minivan has no crank?
First, check for good ground at the PCM. Then check for a 5 volt reference signal (key on) at the throttle position sensor TPS (pink/yellow) wire. Also check for 8-9 volts at the camshaft position sensor CMP (brown/pink) wire.
What does no crank, no start mean?
An anti-theft related no crank, no start problem will appear as a start/stall, start/stall, (several or just once) and then a no crank. If those are the symptoms, first check your key ring to make sure you don’t have any other “transmitter” type keys on your key ring (regardless of brand). Then, try a different key.
