How do you reset the oil light on a Chevy Equinox?

How do you reset the oil light on a Chevy Equinox?

2010-2017 Models

1. Turn the key in the ignition to the “On/Run” position with the engine off.
2. Press the “Menu” button for the Vehicle Information Menu.
3. Press “Up“. The remaining oil life will be displayed.
4. Press and hold the “SET/CLR” button until 100% is displayed.
5. Turn the ignition off.

How do you reset the oil light on a 2007 Chevy Equinox?

How to Reset the Oil Indicator on a Chevrolet Equinox

1. Insert the key into the ignition.
2. Turn the key to the run position, but do not start the vehicle.
3. Press and release the gas pedal three times within three seconds of turning the key.
4. Observe as the oil change light begins to flash.

How to reset Chevy Equinox oil life light oil change?

Time needed: 7 minutes. When the remaining oil life is low, the Change Oil Soon message will appear on the display. The Oil Life display must be reset after each oil change. Follow the instructions below to reset the engine oil life system on your Chevy Equinox:

How to reset your Chevy or GMC oil change light?

Here’s the easy way to reset the oil light on your Chevy or GMC. Oil lights have been a standard feature on Chevy and GMCs for years. Newer Chevys will have a built in Vehicle Information Center (VIC), but older models don’t. If your GMC is 2006 or newer, it comes with the GM Oil Life System.

How to reset the oil soon Minder light?

1 Turn the ignition key to the “ON” position Don’t start the engine! 2 Fully press and release the accelerator pedal to the floor slowly 3 times within five seconds If the CHANGE OIL SOON light blinks, the system is resetting 3 Turn the ignition off and then start the engine to verify the indicator has been reset Done!

What to do if your oil change light does not turn off?

Watch for the oil light to flash and turn off. If the oil change light does not turn off, turn the key to the off position and retry the process. 1. Turn the key to the accessory power position.

Time needed: 7 minutes. When the remaining oil life is low, the Change Oil Soon message will appear on the display. The Oil Life display must be reset after each oil change. Follow the instructions below to reset the engine oil life system on your Chevy Equinox:

1 Turn the ignition key to the “ON” position Don’t start the engine! 2 Fully press and release the accelerator pedal to the floor slowly 3 times within five seconds If the CHANGE OIL SOON light blinks, the system is resetting 3 Turn the ignition off and then start the engine to verify the indicator has been reset Done!

How do I reset the oil in my car?

*Press the MENU button until vehicle information menu is displayed then scroll through the menu with the down arrow until Remaining Oil Life is selected then press SET/CLR (check button) to select. 3. Use up or down arrow to select YES to reset. 4. Confirm reset by pressing SET/CLR button. 5.

What kind of engine does Chevy Equinox have?

On the exterior, the Equinox carries a body design that looks a box with dimensions more broad and elongated. In the engine and performance, Chevrolet Equinox 2014 is equipped with a 4-cylinder engine with a capacity of 2.4 liters.