How do you replace the brakes on a Ford Focus?

Pull the brake drum straight away from the hub assembly to remove it. If the drum will not come off easily, make sure that the parking brake is not engaged. If your Focus is equipped with ABS, you will need to disconnect the ABS connector before you can remove the brake drum. Use a flat head screwdriver to remove the two brake shoe retaining clips.

How to replace rear brake shoes and wheel cylinder?

How to replace the rear brake shoes and a leaky wheel cylinder on a 1999-2005 Ford Focus. You must torque the drum bearing to 170 foot pounds of torque which is not shown in this video. — Please use needle noise vise grips instead of side cutters on the brake springs. —

How do you replace the rear drum brake?

6) Remove the retaining clips by simply using a screwdriver and push down on them. 7) You can then wiggle, pull and push to get the assembly of the rear brakes off the backing plate. 8) Remove the parking brake cable from the brake assembly. Take the brake pads and springs apart, replace with new brake pads.

How do you replace brake pads on a car?

8) Remove the parking brake cable from the brake assembly. Take the brake pads and springs apart, replace with new brake pads. 9) Proceed to clean the backing plate with the brake clean, then wipe the rub points dry. 10) Apply the silicone lube or whatever you choose to use.

Is there a way to adjust rear drum brakes?

Oh and just go in reverse and hit the brakes that’s how they work. They won’t adjust going forward. Click to expand… Nope! Our cars dont have the star adjuster. Its a ratchet adjuster. Put everything together, pump the pedal hard once and hear it click. Adjusted!

How often do I need to replace my brake nut?

Remove the 29 mm rear hub bolt nut from the brake drum. This will require either a breaker bar or an impact wrench. This nut is torqued to 175 ft-lbs, and should not be removed more than four times. Use a permanent marker to make a mark on the nut each time it is removed.

What to do when you need to replace your brake shoes?

Remove the cap from the brake fluid reservoir and set it aside. Be careful when handling brake fluid. Avoid getting any on painted parts or skin. Use a turkey baster to remove 2-3 ounces of brake fluid from the reservoir to prevent overflow when working on the brakes. Read before continuing (photo courtesy of katerha ).

How to adjust rear drum brakes in focus?

Automatically……… They adjust them selves but when reinstalling you must make sure that you adjust them out enough to grab onto the drum then they will auto adjust from there. Oh and just go in reverse and hit the brakes that’s how they work. They won’t adjust going forward.

Where is the adjuster on a drum brake?

The drum brake adjuster is located under an access cover in the back of the drum brake. Using the screwdriver, gently pry out the rubber grommet that protects this access cover. Step 2: Adjust the star wheel.

How to adjust drum brakes on Star Wheel?

This article covers the adjustment process for drum brakes of the star wheel type. Step 1: Lift the rear end of the vehicle. Make sure the vehicle is in park and that the parking brake is set. At the rear end of the vehicle, place the jack at a safe location under the vehicle and lift one side of the vehicle off the ground.

Can you adjust rear drum brakes in reverse?

Going in reverse has no affect on the adjustment like it does with star adjusters. Only thing I don’t like about our set up is you cant adjust them down to easily pull the drum. Probably, been doing it since I’ve been doing brake way back in the day.

How do you replace the brakes on a Ford Focus?