How do you remove a clutch on a Ford Fan?

Remove the large nut on the fan with the 1-1/16 wrench by turning counter clockwise. Once loose, turn the fan in the same direction and it will come right off.

How is a fan clutch attached to a water pump?

This large nut is directly attached to the fan clutch mechanism. The water pump pulley has about 1-inch long threaded post on the end of the pulley. The nut is screwed onto the post on the water pump pulley. This requires a large wrench and a tool to lock the pulley from moving as the nut is broken loose. Remove the fan shroud.

How to remove a clutch nut on a 2005 Ford F-150?

After battling the clutch nut on a 2005 Ford F-150 5.4L with both a band wrench and a special removal kit that didn’t fit my vehicle, it occurred to me there may be a better way. If you’ve struggled like I have, you may find this method pretty helpful. All you need is a length of chain about 8-10 inches long. Loading…

How do you replace a fan on a Ford?

Replace the fan by holding the nut perfectly level with the water pump post and start the nut by hand, making sure not to strip the threads. Once started, spin it on the rest of the way by hand, turning the fan clockwise. Once it will not turn any farther, use the large wrench and give it an assertive yank to lock it on.

How to remove an automotive engine fan clutch?

Remove the Fan Clutch Next we installed a large crescent wrench onto the fan clutch nut. Then we hit it with a hammer to loosen the fan. If you are ever wondering which way to loosen the fan nut (some are reverse thread) it will always loosen in the same direction as the fan turns when the engine is running.

How big is the nut on a fan clutch?

1. Identify the Nut Size Each fan clutch will have its own mounting nut size which will range from 22mm to 36mm depending on the application and manufacturer. You can also use a large adjustable wrench if you do not have the proper tool. You may need to remove the fan shroud to get at the cooling fan. 2. Hold the Water Pump Pulley

How do you remove a split fan from a Ford?

Remove the fan shroud. If it is a split design where there is a top and bottom half held together on each side by a screw, remove the top screws and the two side screws with a socket and ratchet. Remove the top half of the fan shroud. If it is a solid one piece shroud, remove the top and bottom screws and leave it loose.

What do I need to know about the fan clutch in my car?

Listen out for a gentle roar from the fan clutch when you’re driving at least 50 miles per hour, as this can indicate that it’s binding or locking up. Next, locate the fan clutch bolted to the water pump in the engine compartment.

Remove the large nut on the fan with the 1-1/16 wrench by turning counter clockwise. Once loose, turn the fan in the same direction and it will come right off.

How do you remove a water pump from a Ford Fan?

IThe shroud will come out with the fan. Remove the top radiator hose by using a screwdriver to loosen the clamps. Hook the ends of the water pump pulley lock on the bolts on the outside of the water pump pulley. Remove the large nut on the fan with the 1-1/16 wrench by turning counter clockwise.

When to replace the fan clutch in a Ford Explorer?

A good fan clutch should bring the fan to a halt within four or five revolutions. If yours continues to spin, or won’t spin at all, you have a bad fan clutch and will need to replace it. Start the engine, raise the hood and wait for the fan to engage.

How to replace radiator fan clutch 06-10 Ford Explorer?

(Playback ID: QQ8MlA9vppHRP1Po) Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred while retrieving sharing information. Please try again later.

How do you remove a fan from a Ford truck?

Remove the fan shroud. Remove one of the fan-to-clutch bolts, to access the clutch-to-hub nut. Turn the large fan clutch-to-hub nut COUNTERCLOCKWISE to remove the fan and clutch from the hub. Use holding tool T84T-6312-C and nut wrench T84T-6312-D, or equivalent. If the fan and clutch have to be separated, remove the remaining fan-to-clutch bolts.

Can a broken radiator fan clutch be replaced?

1A Auto shows you how to repair, install, fix, change or replace a broken radiator fan clutch. If your car overheats or runs hot and the radiator cooling fan will not turn on, then this may be your solution. This video shows the process for the 97, 98, 99, 00, 01, 02, 03 Ford F150

Can a broken radiator fan be replaced in a Ford Ranger?

1A Auto shows you how to repair, install, fix, change or replace a broken radiator fan. If your car overheats or runs hot and the radiator cooling fan will not turn on then this may be your solution. This video shows the process for the 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 00, 01, 02, 03, 04 Ford Ranger

How can I Fix my Clutch on my Ford Ranger?

Fix: The first, and easiest, task is to check the fluid level. If low, top off the system and test the clutch pedal. Next, check for leaks along the hydraulic lines. If discovered, identify and replace the bad lines or seals. Then, bleed the clutch system to get any air out.

What should I do if my fan clutch is going bad?

Silicone fluid leaking from the fan clutch would cause this problem. When the engine is off, there are a few things you can do to check the fan clutch: Spin the fan. Electronic types might freewheel, but most fan clutches should spin with a little effort.

Are there any free manuals for Ford Ranger?

Every Manual available online – found by our community and shared for FREE. Enjoy! Ranger is Ford’s attempt in a crowded compact pickup truck, whose production spans for several decades and four generations. Throughout these years, it held a considerable market share and rack up respectable sales figures of over 7 million units sold.

What is the direction of the fan clutch?

What direction is the fan clutch threads lh or rh. Vehicles that have the water pump turning the opposite direction as the crankshaft need a right hand threaded nut. These water pumps turn in a counter-clockwise direction.

Is it necessary to remove retaining nut from fan clutch?

CAUTION:For removal of the fan clutch retaining nut from the water pump, it is necessary to determine water pump rotation. This is necessary on vehicles that have the single, large fan clutch assembly retaining nut. Attempting to loosen the fan clutch assembly in the wrong direction could result in vehicle damage.

Is it easier to remove radiator clutch or fan clutch?

As you have observed with last years posts in this thread the fan clutch can be a bit tricky to get out because that monster nut is left handed and it has been self tightening for many years. In my experience the radiator removal method takes less time and it is a lot easier to to get thing setup right.

Is there a pulley holder for a fan clutch?

Pulley Holder & Fan Clutch Tool Kit – 3472 . . Only 4 left in stock – order soon. . . . Only 10 left in stock – order soon.

How to replace air conditioner clutch in 2000 Ford F250?

If playback doesn’t begin shortly, try restarting your device. FIX Your AC System-Diagnose-Flush-REPLACE-Compressor-Accumulator-Orifice Tube-Vacuum-ReCharge .

How do you remove clutch nut on Ford PowerStroke?

IIRC I stood on the drivers side and spun the top of the nut towards the passenger side. Keep the belt on until u get the nut loose. I went with fleetrite ELC looks like koolaid and it seems to work fine.

When to remove the fan clutch in a 2008 Ford truck?

Well I know this is an old post, now it is nearly June of 2016, and I need to remove the fan clutch in my 2008. I will cover what it took for this truck with nearly 140Kmiles to replace the power steering pump and radiator. The first attempt I replaced the power steering pump with the radiator installed, a la Ford manual method.

How to remove a fan from a Ford PowerStroke diesel?

Couldnt get mine off either (no air hammer). Def need air hammer Bump To Pass!! Screwdriver through the holes in the water pump pulley and a crescent wrench work every time. You may need to hit the end of the wrench with a hammer just to break it loose initially. As stated LEFT HAND THREADS!!!

How old is the fan clutch wrench on a Ford F150?

This tool worked perfectly for a 2000 Ford F150 4.2 V6 which means it should work fine on any 4.2L Ford engine. I literally loosened the 20 year old fan clutch nut in seconds when I was prepared for a knuckle-bleeding struggle.

When did the Ford fan clutch Nut come out?

Easy access to fan clutch nut on 1984 through 1993 Ford 4.9L E and F series truck engines, 1984 through 1987 Ford 1990 to current 4.0 Liter engines. These items are shipped from and sold by different sellers. Show details Only 7 left in stock – order soon. Ships from and sold by Tool Liquidators. Only 8 left in stock (more on the way).

Where can I Borrow a clutch fan tool?

You can borrow a fan clutch tool from AutoZone or Shucks (or whatever they call it) or Oriellys. You basically buy it then bring it back within 48 hrs for your money back. If you are handy at fabrication you can easily make the tools yourself from some 1/8″ or 3/16″ steel.

What happens if your fan clutch goes bad?

A properly-functioning fan clutch is critical to engine reliability, as it works to maintain a safe temperature range. A failing fan clutch could leave you stranded with expensive repair bills, so pay attention to these symptoms.

How many bolts do you need to unbolt a fan clutch?

On many imports, four or five bolts hold the fan to the clutch, and four or five hold the clutch to the fan pulley. Before you unbolt anything, look at the fan pulley and the routing of the drivebelt.

How many Ford clutch removal tools are left?

Only 16 left in stock – order soon. . Only 1 left in stock (more on the way). . Only 17 left in stock – order soon. . Only 2 left in stock – order soon. . Only 4 left in stock – order soon.

How much is a fan clutch for a Ford Ranger?

Fan Clutch for Ford Ranger 1998-2011 Explorer 1998-2001 Explorer Sport Trac Mazda B4000 Mercury Mountaineer 4.0L 5.0 out of 5 stars3 $31.99$31.99 Get it as soon as Tomorrow, Jun 17 FREE Shipping by Amazon Only 9 left in stock – order soon.

What kind of fan does a Ford Ranger use?

IRONTEK 2779 Engine Cooling Fan Clutch fits FORD 1997-2001 F-100, 1995-2008 RANGER 3.0L, 1994-2008 for MAZDA B3000 Radiator Fan Clutch 6L5Z8A616-AA 3.6 out of 5 stars8 $39.99$39.99

What are the symptoms of a bad or failing fan clutch?

As the fan clutch is a cooling system component, any issues with it can cause overheating and other issues. Usually a bad or failing fan clutch will produce a few symptoms that can alert the driver of a potential issue.

How do you remove the fan clutch on a Ford Ranger?

Basically, there are 4 bolts that hold the pulley onto the fan clutch. You have to loosen those four bolts just enough so you can get the big wrench in the removal tool between them and the flange on the water pump. Then put a wrench on the big nut in front and use the rented tool to keep the pulley from spinning and loosen the big nut in front.

What’s the best way to remove a fan clutch?

You can rent a fan clutch removal tool. It should be reverse thread. Or the other way if you have an air hammer hit the nut with it and it will loosen. Only way I have ever done it.

When did the Ford Ranger get a V6?

The Ford Vulcan V6 is a 3.0L, 60° V6 engine, first introduced for the 1986 model year and originally designed to be the optional engine in the Ford Taurus and Mercury Sable. In 1991 it became available in the Ford Ranger where it replaced the Cologne 2.9 engine (which it is not related to) as the base V6 in the Ranger

How big is the crankshaft on a Ford Ranger?

Ford Ranger 3.0L V-6 Crankshaft Pulley Bolts 107 ft-lbs Flywheel to Crankshaft Bolts 59 ft-lbs Upper Intake Manifold / Throttle Body 19 ft-lbs Exhaust Manifold 19 ft-lbs

Can a water pump pulley be removed from a fan?

The water pump pulley has about 1-inch long threaded post on the end of the pulley. The nut is screwed onto the post on the water pump pulley. This requires a large wrench and a tool to lock the pulley from moving as the nut is broken loose. Remove the fan shroud.

How does a torque limiting fan clutch work?

A torque-limiting fan clutch reacts to engine speed. A centrifugal valve opens to allow the flow of heavy silicone fluid, locking the fan blades to the pulley. At idle and low engine speeds, this fan clutch is fully engaged, gradually disengaging as engine speed increases.

How does a fan clutch work on a radiator?

A thermal fan clutch reacts to temperature of the air rushing over it from the radiator. As the radiator heats up, the air passing through it also heats up. This heats up a small bi-metallic coil in the face of the fan clutch, releasing an internal valve.

What is an electric fan clutch?

The fan clutch is a cooling system component that controls the operation of the engine cooling fans. While many newer vehicles now use electric cooling fans to keep the engine cool, many older vehicles used a mechanical fan clutch to control the fans.

What causes oil to come out of a fan clutch?

Run your finger along the edges of the bearing seal on the backside of the fan clutch. If it comes away with a heavy coating of oil, the culprit is either a crack or a faulty seal. Radial streaks are another potential clue—this happens when oil escapes from the clutch and is then blown outward in all directions by the fan.

How do you remove a fan clutch from a water pump?

Once the new part has been installed gently slip the fan clutch down in front of the water pump using caution as to not contact the radiator or damage the plastic fan blade. The threads on the water pump flange are large and can be cross threaded easily so we advise you to start the fan nut by hand before taking a wrench to it.

What should I do if my engine fan clutch is loose?

Once the fan is loose simply keep rotating the fan in the same direction while watching the threads to make sure the fan clutch in turning without the nut. If the nut is not turning use the wrench to help it along. Use your opposite hand to support the fan blade so it does not hit the radiator and cause a leak when the fan becomes loose.

How to remove clutch fan from Dodge Ram?

Dodge ram clutch fan removal super easy!!! – YouTube Dodge ram clutch fan removal super easy!!! If playback doesn’t begin shortly, try restarting your device.

Which is the correct way to undo nuts and bolts?

For more on marking an answer as the “Best Answer”, please visit our FAQ. So, regardless of your or the bolt/nut orientation it loosens to the left or counterclockwise and tightens to the right or clockwise (not unlike politics, come to think of it). There have been, historically, some few, very few alternatives to this rule.

What to do when a bolt on your car is stuck?

Heating the Bolt to Loosen It 1 Heat the bolt with a propane torch if it’s still stuck. If the bolt doesn’t budge when you try loosening it with the extended wrench, it’s time to try using heat to un-stick the bolt.

How to extract a broken off bolt every time?

How To: Extract Broken off Bolt EVERYTIME!!! – YouTube If playback doesn’t begin shortly, try restarting your device. An error occurred. Please try again later. (Playback ID: 3MI7Xz1mOGFT0Lws) Videos you watch may be added to the TV’s watch history and influence TV recommendations.

How do you remove a clutch on a Ford Fan?