How do you know if your injection pump is bad?
How do you know if your injection pump is bad?
Is My Fuel Pump Going Bad? Here Are 8 Signs It Is!
- Fuel Tank Noise. A damaged fuel pump might make a loud, whining sound that you’ll hear from your gas tank.
- Difficult Starts.
- Sputtering Engine.
- The Actual Stall.
- Power Loss.
- Surging Power.
- Lower Fuel Efficiency.
- Dead Engine.
Where to get a GM 6.5 diesel injection pump rebuilt?
1992-2000 6.5 Mechanical Chevy/GMC Diesel Injection Pump for GM 6.5L Diesel Engines Huckstorf Diesel is an authorized Stanadyne dealer. Get your GM 6.5 diesel injection pump rebuilt by an authorized remanufacture for the best performance and highest quality!
What kind of pump is in a 1994 Chevy 6.5L?
Fully refundable if returned within 60 days 1994 6.5L Heavy Duty. The eighth character in VIN will be an F. Engine RPO L65 Application Caution: Some 1994 Heavy Duty vehicles had the PCM calibration PROM changed to use the 440-6116-5068 pump.
What kind of pump does a 6.5 diesel engine use?
Through the years there were many different variations in the 6.5 diesel injection pumps. The engine application codes were based off the Truck Style, Model Designation, and if the engine was equipped with or without a turbocharger. This pump will work on the following applications.
When did GM replace the DB-2 injection pump?
GM replaced the DB-2 with the electronic throttle DS-4 in 1994-2000 vehicles. The DS style pump used a pump mounted driver known as the PMD. The PMD is an electrical solenoid that drives a plunger solenoid inside the injection pump.
1992-2000 6.5 Mechanical Chevy/GMC Diesel Injection Pump for GM 6.5L Diesel Engines Huckstorf Diesel is an authorized Stanadyne dealer. Get your GM 6.5 diesel injection pump rebuilt by an authorized remanufacture for the best performance and highest quality!
Fully refundable if returned within 60 days 1994 6.5L Heavy Duty. The eighth character in VIN will be an F. Engine RPO L65 Application Caution: Some 1994 Heavy Duty vehicles had the PCM calibration PROM changed to use the 440-6116-5068 pump.
Through the years there were many different variations in the 6.5 diesel injection pumps. The engine application codes were based off the Truck Style, Model Designation, and if the engine was equipped with or without a turbocharger. This pump will work on the following applications.
GM replaced the DB-2 with the electronic throttle DS-4 in 1994-2000 vehicles. The DS style pump used a pump mounted driver known as the PMD. The PMD is an electrical solenoid that drives a plunger solenoid inside the injection pump.