How do you change the radiator on a Dodge Ram?
How do you change the radiator on a Dodge Ram?
Any oil change shop should take your old fluid at no charge to you. Remove the drain plug on the bottom of the radiator to get any residual fluid out. Remove the two drain bolts on the bottom-center of the engine block near the mounts to remove any residual fluid from there as well.
Where is the drain plug on a Dodge Ram?
Locate the radiator’s drain valve on the bottom of the radiator. You don’t need to raise the Dodge Ram since it’s a high truck with enough room for this job. Place a tray underneath the drain plug.
How do you remove coolant from a radiator?
Place a tray underneath the drain plug. Then, using your wrench, loosen the drain valve. Let it drain until it’s empty. After you dispose the old coolant, close the drain plug and fill the radiator with distilled water. Once again, open the drain valve and let the water drain out of the radiator. Repeat this process at least three times.
How often should I Flush my Dodge Ram radiator?
It circulates coolant through the engine to ensure it stays cool under any driving condition. After a while, rust and deposits start building up inside the radiator. Flushing the system ensures it stays lubricated, rust free, and without contaminants. It’s recommended you perform a radiator flush once a year to prevent the truck from overheating.
How do you change the coolant in a Dodge Ram?
Use the recommended coolant (make sure to get the correct color) and fill the radiator as well as reservoir tank. Replace the radiator cap. Replace the drain plugs. Use Teflon tape on the threads for the engine block. Replace the battery cable.
How do you flush a Dodge Ram radiator?
After you dispose the old coolant, close the drain plug and fill the radiator with distilled water. Once again, open the drain valve and let the water drain out of the radiator. Repeat this process at least three times.
Where is the radiator cap on a Dodge Ram?
Park on a leveled ground, open the hood, and remove the radiator cap. It’s located in the front of the car on top of the radiator. Before removing the radiator cap, be sure to put your hand on top of the engine to check if it is hot. If you can’t touch the engine, the coolant inside the engine is too hot and will burn you.
Locate the radiator’s drain valve on the bottom of the radiator. You don’t need to raise the Dodge Ram since it’s a high truck with enough room for this job. Place a tray underneath the drain plug.
