How do you change brake pads on a Mondeo?

This Procedure puts the module into the service position for changing brake pads or calipers.The calipers will be retracted a locked in place so the brake pads can be replaced.No other command can be used other than exit maintenance mode at this point. Refer to the appropriate workshop manual for further details.

How do you change the rear brake pads?

Release handbrake cable from actuator on rear of calliper. Remove the return spring and rotate the arm, allowing the cable to be released easily. Lower guide pin bolt (13mm, and 19mm spanner to hold the end of the sleeve it goes into) is now removed and inner caliper frame hinged upwards, leaving pads in position either side of disc.

How to replace rear brake pads by x431?

Here comes the guide on How to replace Ford Mondeo rear brake pads by x431 .At First part,you will learn it by text with pics.And for more detail info,you would better to watch the video guide at end of article.Hope it helps! Connec the x431 pro to the vehicle and enter the menu to select Ford

Where is the Allen key for rear brake pads?

It must be pushed back, whilst rotating it, to screw the threaded rear piston back into the housing. A 12mm hexagon socket is located in the centre of the piston (not on 55 plate, merely a dimple), for this purpose and hence a 12mm Allen key is required! (Haynes, of course, just say use an Allen key).

What kind of key do I need for Mondeo?

My wifes Mondeo (mk2) uses a 7mm Allen key tool, we didn’t need any other special tools to replace brake pads, discs, wishbones, ARB’s, bushes, driveshafts and sundry other bits.

How big are the brake calipers on a Mondeo?

glance, any sizes or specifications and as the Mk4 Mondeo is a bit new then many people ‘here’ may not (though many also might) know the specs of the brake calipers/pistons. > Part 2 > The mk3 manual has reference to a allen key socket for the front’s > maybe a 6/7mm – sorry I no longer have the manual to clarify this. > So the questions are

My wifes Mondeo (mk2) uses a 7mm Allen key tool, we didn’t need any other special tools to replace brake pads, discs, wishbones, ARB’s, bushes, driveshafts and sundry other bits.

Are there brake calipers on a Mk4 Mondeo?

There aren’t, at a quick glance, any sizes or specifications and as the Mk4 Mondeo is a bit new then many people ‘here’ may not (though many also might) know the specs of the brake calipers/pistons. > Part 2 > The mk3 manual has reference to a allen key socket for the front’s

How to change rear brakes on Ford Mondeo Vignale?

Press and hold the accelerator pedal and place the EPB switch to the RELEASE (downward) position. Continue to hold the accelerator pedal and EPB . Set the ignition to OFF then set the ignition to ON within 5 seconds. Continue to hold the accelerator pedal and the EPB switch.

What’s the maintenance mode on a Ford Mondeo?

Set the ignition to ON. Press and hold the brake pedal. Press the EPB switch to release the parking brake. Release the brake pedal and the EPB switch. Press and hold the accelerator pedal and place the EPB switch to the RELEASE (downward) position. Continue to hold the accelerator pedal and EPB .

How do you change brake pads on a Mondeo?