How do you center an airbag clock spring?
How do you center an airbag clock spring?
Turn the inner part of the clock spring to the right and count the number of full revolutions. Rotate the inner part of the clock springs 2.5 turns back. This will set the clock spring on center. Install the steering wheel.
Why does the SRS light come on when you turn on the airbag?
When this happens, it’s common for it to short out or corrode, causing the SRS light to come on. The airbag clock spring sits inside your steering wheel and basically keeps the electrical wiring between the car and the driver-side airbag from being damaged as the wheel is turned.
Why does my airbag light keep coming on?
Faulty airbag sensors are probably the most common cause of airbag lights coming on. Your vehicle has a number of different sensors which are designed to activate the airbag system in the event of an accident. Naturally, these can become faulty, which would cause the airbag light to illuminate.
What causes a short circuit in the airbag sensor?
The airbag module controls the overall airbag system and hence ensures safety measures. With regular exposure to moisture, the corrosion starts forming, and short circuit happens. The short circuit disturbs the entire wiring, and hence a code is generated in the dashboard.
How is the clock spring attached to the airbag?
Electrical connectors are attached to the bottom of the airbag clock spring to transfer signals and controls to the steering wheel and airbag. This can also be a wiring harness on some models. Once removed inspect the clock spring for damage. When replacement is required match the new part to the old part, they should match identically.
What are the symptoms of a bad clock spring?
Symptoms of a bad clock spring include an airbag warning light on along with no horn operation. Also the radio or cruise controls may not work if they are mounted on the steering wheel. If you are doing the job yourself the part will cost between $55.00 and $110.00 (US) from Amazon depending on the manufacturer of the car.
When this happens, it’s common for it to short out or corrode, causing the SRS light to come on. The airbag clock spring sits inside your steering wheel and basically keeps the electrical wiring between the car and the driver-side airbag from being damaged as the wheel is turned.
Where to find clock spring on steering column?
Take note of the alignment markers of the clock spring and the steering column shaft. These marks must be close when reinstalling the clock spring. Locate the clock spring mounting screws which will be accessed through a series of small holes.
