How do I set up my Brother printer to fax?

How do I set up my Brother printer to fax?

To put your Brother machine in Fax/Tel Mode, follow these steps:

1. Press. (FAX) to illuminate it.
2. Press Menu and choose Fax > Setup Receive > Receive Mode.
3. Choose Fax/Tel.
4. Press OK.
5. Press Stop/Exit key. Your Brother machine’s LCD will display the date, time, and “F/T.”

How do I set up my brother fax 2840?

To view the Quick Setup Guide in other languages, please visit http://solutions.brother.com/.

1. 1 Unpack the machine and check the components.
2. 2 Remove the packing.
3. 3 Attach the ADF.
4. 4 Install the Handset.
5. 5 Load paper in the paper.
6. 6 Connect the power cord.
7. 7 Choose your language.
8. 8 Choose the correct Receive Mode.

How do I connect my Brother fax machine to my phone line?

Insert one end of the phone cord into an analog phone jack and then insert the other end into the port labeled “Line” on your Brother fax machine. Connect any additional external devices, such as a second telephone line or a telephone answering device (TAD) to the port labeled “EXT” on your Brother machine.

Where is the fax number on Brother printer?

Open the “Device Information” menu. Scroll through the settings menu until you find the “Device Information” option. Press “Enter.” The settings sub-menu opens. In this area, you can view the settings of the fax machine, including the fax number that is assigned to the machine.

Can you fax from a wireless printer without a phone line brother?

The WiFi connection between the machine and the computer is what makes the machine wireless. To fax over a WiFi printer, you’ll still need to plug the machine into a phone jack. The only way to fax from a wireless printer without a phone line is to get a special fax machine that connects to a mobile cellular network.

How do you reset the drum on a Brother fax 2840?

How to Reset Drum on Brother Intellifax 2840

1. Make sure that the machine is turned on.
2. Open the front cover.
3. Press Clear.
4. Press 1 to reset the drum counter.
5. When the LCD shows Accepted, close the front cover.

How do I set the time on my brother fax 2840?

Set the date and time

1. Press Menu or Settings on the control panel.
2. Press the Up or Down Arrow key or the dial pad to choose the Initial Setup, and then press OK .
3. Press the Up or Down Arrow key or the dial pad to choose Dateime, and then press OK .

How do you fax on a Brother laser fax?

How to Send a Fax:

1. Press “FAX” button. Press the “FAX” button below the display screen and illuminate it.
2. Insert the document you want faxed by either: Using the ADF.
3. Enter the Fax Number. Use the dial pad located to the right of the display screen to enter the fax number you want your documents sent to.
4. Press “Start”.

How do you fax on a Brother Laser Fax Super g3?

Use One Touch, the key pad, speed dial, or search to enter the phone number you would like to send your fax to. Send the fax. Once the document is inserted, the cover page is set, and the phone number is entered press the “Fax Start” button located in the bottom right corner of the control panel.

Can my Brother printer fax without a phone line?

You must have a telephone line to send and receive faxes with your Brother machine. To send and receive faxes, you must plug the telephone line cord directly from the wall telephone jack (socket) to your Brother machine’s jack (socket) labelled LINE.

How can I send a fax and phone on the same line?

To connect your telephone and your fax machine using two separate telephone lines, you connect one end of the cable into the wall jack for your fax line and the other end of the cable into the jack typically labeled “Line” found on the back of the fax machine.