How do I reset the tire pressure sensor?
How do I reset the tire pressure sensor?
Turn the key to the ON position but do not start the car. 2. Press the DIC RESET button to clear any warning messages, if they’re present. 3. Press the OPTIONS button and cycle through the menu until the display goes blank. 4. Press and hold the RESET button until “FOB TRAINING” appears on the display.
How to reset TPMS low tire pressure light?
Follow these steps to do it: Press the Remote Keyless Entry (RKE) transmitter’s LOCK and UNLOCK buttons simultaneously until the horn sounds twice Start from the driver side front tire, place the TPMS Relearn Tool against the tire sidewall, near the valve stem. Then press the button to activate the TPMS sensor
Can you reset the TPMS sensor on a Chevy Cobalt?
If you replacing a spare tire with a road tire containing the TPMS sensor on your Chevy Cobalt, the system will detect a malfunction and the low tire pressure warning light will blink. When that happens, the TPMS sensor reset process must be done. Depending on the vehicle model you have, here are a few ways to reset the TPMS.
Can a tire sensor be damaged during a tire change?
A sensor can be damaged during: Normal tire service; Tire replacement; Brake system work; Tire rotation; A CV boot/axle replacement; An oil change; A filter change; Additionally, the air pressure gauge may be miscalibrated, or the battery that powers the sensor may have died. In these cases, the sensor will need to be recalibrated or replaced.
How to reset the tire pressure sensor TPMS?
If you have 2007 2008 2009 2010 Chevrolet Silverado, you can reset the TPMS by increasing or decreasing the tire pressure without using tools. Follow these instructions to get started: If your vehicle has an ignition button, press the Engine Start/Stop button without touching the brake pedal
How to reset tire pressure sensor on Chevy Silverado?
If your vehicle has the DIC buttons, press the set/reset button. The horn will sound twice to indicate the TPMS receiver is ready, and the TIRE LEARNING ACTIVE message will display.
If you replacing a spare tire with a road tire containing the TPMS sensor on your Chevy Cobalt, the system will detect a malfunction and the low tire pressure warning light will blink. When that happens, the TPMS sensor reset process must be done. Depending on the vehicle model you have, here are a few ways to reset the TPMS.
How to reset the tire pressure monitor on the 2007 Chevy?
Remove the air chuck from the valve stem and recheck the pressure in the tire. Repeat Steps 5 and 6 until the tire pressure is within 2 psi of the recommended pressure. Repeat Steps 5 through 7 on to adjust the pressure on any other tires that require additional air.
