How do I reset my dodge truck?

How do I reset my dodge truck?

To reset the computer in your RAM 1500, take the following steps:

1. Identify your battery’s negative cable.
2. Disconnect the negative cable from the battery.
3. Wait 20 minutes so that all systems have shut down.
4. Reconnect the negative cable.

What happens if you turn off a 2002 Dodge Ram?

2002 Dodge Ram Security malfunction, if battery is dead charge then disconnect 15 minutes to 1 hour, computer will reset, reconnect battery. Car starts normally. Happens to me if I am parked I turn the car off then turn it back on without opening a door.

What to do if your Dodge truck wont turn over?

We put jumper cables from another truck to both batteries and locked and unlocked the door with the key – the horn beeped and then the truck fired right up. 40 people found this helpful. 2002 Dodge Ram Security malfunction, if battery is dead charge then disconnect 15 minutes to 1 hour, computer will reset, reconnect battery.

What to do if your Dodge Ram wont start?

Chances are, when your engine was rebuilt, the intake manifold was inspected and it’s gaskets replaced. That leaves the throttle body, which may need to be cleaned. Use your service manual to remove the hose that goes into the throttle body, this video shows how to clean it.

What happens to the battery in a 2002 Dodge Ram?

24 people found this helpful. 2002 Dodge Ram Security malfunction, if battery is dead charge then disconnect 15 minutes to 1 hour, computer will reset, reconnect battery. Car starts normally. Happens to me if I am parked I turn the car off then turn it back on without opening a door. The little red light drains the battery in 2 hours.

What to do if your Dodge Ram 1500 won’t start?

Check your fuses, relays, and wiring. If none of those work, hook up a diagnostic and see if there’s any codes that you can see to fix it before my assumption. 8 people found this helpful. Not sure if your problems are unrelated here from your description…however. There’s a little I guess black box under your hood.

What does it mean when your car won’t start?

If this time you see a spark or no spark, you have a problem in the ignition system. Consult your vehicle repair manual for your particular model for further diagnosis. Depending on your particular model, you may have a problem with an ignition coil, distributor, ignition module, igniter, or some other related component.

What should I do if my engine won’t start?

You should see a bright spark jumping the gap in the spark tester. If you don’t see a spark, repeat the test. This time, adjust the spark tester to 30KV. If you still don’t see a spark, repeat the test and set the tester to 10KV. If this time you see a spark or no spark, you have a problem with the ignition system.

Why are the gauges on my Dodge Ram not working?

The interior lights come on the radio comes on but the gauges themselves do not work. I hate to say it but it your ECM might be bad. Check your fuses, relays, and wiring. If none of those work, hook up a diagnostic and see if there’s any codes that you can see to fix it before my assumption. 8 people found this helpful.