How can I configure my UTStarcom modem for BSNL broadband?

How can I configure my UTStarcom modem for BSNL broadband?

Setup BSNL Type 2 ADSL Modem WA3002 -g1 UTStarcom

1. Connect to computer.
2. Login to Setup Page.
3. Click on Advanced Setup.
4. Edit VPI settings of PPPoE connection in WA3002 BSNL Modem.
5. Select PPPoE from the list of network protocols and click next.
6. BSNL Username and Password.
7. Choose Save/Reboot WA 3002 -g1 ADSL BSNL Modem.

How do I configure my ADSL modem as a wireless router?

Power on your router and computer first and then modem.

1. Log into the router’s web-based management page.
2. Configure WAN Connection Type.
3. Enter your PPPoE username and password which are provided by your ISP.
4. Click Save to save your settings, then the router will connect to Internet after a while.

How do I configure my broadband modem?

How to configure your router in 5 simple steps

1. Connect your router. The broadband Wi-Fi router is the bridge between the Internet and your home network.
2. Access the router’s interface and build it.
3. Configure security and IP addressing.
4. Set up sharing and control.
5. Set up user accounts.

How do I reset my Dataone password?

Log in to Broadband, Go to 10.240. 43.216 or 10.150. 128.195. Click on ‘change password’, give ‘Old password’, ‘New password’ and confirm.

Can I use ADSL modem as wireless router?

The ADSL routers can’t be used as normal routers because the routing operation can only be performed on packets going in and out of the ADSL port. It may have one or more normal (Ethernet) ports and even wireless but they are connected together by switching operations.

How do I convert my WIFI modem to a wireless receiver?

How to Use A Router as a Wireless Adapter

1. Start by checking if you router supports a 3rd party firmware.
2. Download and install the firmware according to the instructions for your router model.
3. Click Wireless.
4. Change Wireless Mode to Client.

Can a modem be configured?

Configuring a modem can seem complicated, and often it can be quite difficult to tell what step you’re up to, or what you need to do next. But as long as you’ve got the capable equipment, and the right instructions from your internet service provider (ISP), everything should be breezy.

What is the IP address to configure router?

Most routers use an address of 192.168.1.1. But that’s not always the case, so you may first want to confirm the address of your router. To find your router’s IP address, type cmd in the Windows search bar and press Enter to open the command prompt.

How do I setup a broadband connection on Windows 10?

1. Solution 1.
2. Step 1 Press “Windows key +X”, and click on “control panel”;
3. Step 2 Then go to Network and Internet->View network status and tasks page.
4. Step 3 Click on Set up a new connection or network.
5. Step 4 Select Connect to the Internet and click Next button.
6. Step 5 Click on Broadband (PPPoE).

How do I connect my broadband to wifi?

Connect the modem to the Internet port of the router using the Ethernet cable. Connect the computer to any of the LAN ports on the back of the router using a standard Ethernet cable. Power on your modem. Power on your router.

How can I check my BSNL broadband is active or not?

Find the DSL/FTTH broadband subscription online in 1 minute.

1. Login to BSNL self care portal account with your credentials.
2. Click on Account Number shown against Broadband.
3. Click on My facilities.
4. Press Click here for details in right side page.
5. Click Broadband (Click her for more information) at bottom sid.