How big is the fuel line on a Chevelle six cylinder?
How big is the fuel line on a Chevelle six cylinder?
The six-cylinder and many of the V-8 cars came with 5/16-inch fuel lines, which are too restrictive for a modern V-8. You can purchase a stock-replacement assembly with a 3/8-inch pickup tube and new fuel-sending unit for the fuel gauge.
What kind of hose does Chevelle fuel system use?
The connections thread together, and leaks are very rare. It is essentially a rubber hose with braided steel around the outside to protect it from abrasion and to increase the burst-strength rating. Some hoses have additional layers, such as a Teflon insert or higher-strength exterior wrap.
How to upgrade your Chevelle fuel system step by step?
You can use the social sharing buttons to the left, or copy and paste the website link: https://www.chevydiy.com/how-to-upgrade-your-chevelle-fuel-system-step-by-step/ If your fuel tank is in good condition, you don’t necessarily need to replace it.
Why does the Chevelle fuel system use rubber?
This eliminates the chance of clogging fuel filters with rust and other debris that may be present in an old tank. Modern fuel is hard on rubber prod¬ucts, causing seepage and eventually failure. An original Chevelle system used rubber to connect the steel line at the front and rear of the car. Almost all braided-steel line has a rubber lining.
Where does the air go in a Chevelle cooling system?
Air always takes the path of least resistance, and, without a fan shroud to force the air to be drawn through the radiator, it goes above and below the radiator instead. If you have most of the fan shroud in place, but are missing a section or have a broken shroud, most of the air is pulled in through this section.
Can a stock water pump be used on a Chevelle?
Stock fans can be found in the salvage yard, and a favorite upgrade for small-block Chevelles is converting from the original short water pump to a long-style one. This accepts fans and clutches used on GM cars from the 1970s, and also makes alternator and power steering brackets far easier to find and replace.
How can I improve the performance of my Chevelle?
In addition to taking steps to make sure your Chevelle keeps its cool, there are also opportunities to improve the performance of your car by switching from a belt-driven fan to an electric fan. This Tech Tip is From the Full Book “ CHEVELLE PERFORMANCE PROJECTS: 1964-1972 “. For a comprehensive guide on this entire subject you can visit this link:
How big of a fan do I need for a 500 hp Chevelle?
If you’re producing up to 500 hp, an electric fan rated at 2,500 cubic feet per minute (cfm) of airflow with a full shroud is generally sufficient to keep it cool. Above 500, you want a fan that can pull at least 3,000 cfm.
