How big are the speakers in a Ford Explorer?
How big are the speakers in a Ford Explorer?
You’ll find a full-range speaker in each front and rear door, and your options for aftermarket speakers are nearly unlimited. You’ll find 6″x8″ speakers that fit right into the factory speaker locations, and you can also drop 5-1/4″ speakers in there with the help of adapter plates.
How does the Ford Explorer stereo system work?
The factory radio in the Mach system routes the proper signals to the Ford speakers and subwoofer. If you’re keeping the Mach speaker system, then you’ll want to buy a car stereo with a high-pass filter so you can remove the low bass from the factory speakers, and a dedicated subwoofer output that will allow you to control the factory sub.
Is there an aftermarket amp for a Ford Explorer?
The Ford amp is powerful enough to power some aftermarket subs (like the Kicker Comp), but if you want real power, you need an aftermarket amp. You’ll find plenty of great spots to mount amplifiers in the Explorer — consider the extra spaces under the floor in the rear of the SUV, under seats or behind interior panels.
Can a aftermarket sub fit in a Ford Explorer?
A couple of aftermarket subs will fit in the factory enclosure, and can be powered by the factory amp. Because of the low impedance of the factory sub, we really don’t recommend going this route without replacing the factory amp too. You’ll find plenty of sub enclosures designed to fit your Explorer without costing you cargo space.
How can I tell what speakers fit my car?
To see which speakers fit your vehicle, we’ve disassembled the door panels of tens of thousands of vehicles, measured the spaces where the factory speakers fit, and loaded our findings into Crutchfield’s massive fit database.
How tall is the base radio in a Ford Explorer?
The base receiver is thoroughly integrated with the rest of the dash, but it can be removed and replaced with a variety of single-DIN (2″ tall) and double-DIN (4″ tall) aftermarket radios.
You’ll find a full-range speaker in each front and rear door, and your options for aftermarket speakers are nearly unlimited. You’ll find 6″x8″ speakers that fit right into the factory speaker locations, and you can also drop 5-1/4″ speakers in there with the help of adapter plates.
The factory radio in the Mach system routes the proper signals to the Ford speakers and subwoofer. If you’re keeping the Mach speaker system, then you’ll want to buy a car stereo with a high-pass filter so you can remove the low bass from the factory speakers, and a dedicated subwoofer output that will allow you to control the factory sub.
The Ford amp is powerful enough to power some aftermarket subs (like the Kicker Comp), but if you want real power, you need an aftermarket amp. You’ll find plenty of great spots to mount amplifiers in the Explorer — consider the extra spaces under the floor in the rear of the SUV, under seats or behind interior panels.
To see which speakers fit your vehicle, we’ve disassembled the door panels of tens of thousands of vehicles, measured the spaces where the factory speakers fit, and loaded our findings into Crutchfield’s massive fit database.
A couple of aftermarket subs will fit in the factory enclosure, and can be powered by the factory amp. Because of the low impedance of the factory sub, we really don’t recommend going this route without replacing the factory amp too. You’ll find plenty of sub enclosures designed to fit your Explorer without costing you cargo space.
Can a rear speaker be combined with a front speaker?
If I can combine the front and rear outputs into one speaker, is it a matter of just combining the postive and negative feeds (for both front and rear) on the deck to speaker, or do I need another piece of equipment. As far as I know, the headunit is not bridgeable between the front and rear outputs.
Where are the amps in a Ford Explorer?
To make real noise, there’s plenty of room in the cargo area of the Explorer, especially if you don’t have a third-row seat, and several compartments in panels and underneath floorboards to tuck amps.
Can a JL stealthbox be installed in a Ford Explorer?
The JL Audio Stealthbox is made to fit right into the Explorer. With a vehicle like the Explorer, there are lots of ways to upgrade your entertainment. When you replace the factory radio, your Explorer’s factory DVD system won’t work anymore. You can replace it with an aftermarket DVD system, though.
What kind of speakers do I need for my Ford Explorer?
Some manufacturers offer 6″x8″ plate speakers that will make a nice replacement options up front, but just about any full-range 6″x8″ will fit in those doors. Tools needed: Flat blade and Phillips screwdrivers, panel tool, 7/32″, 6mm drivers There are lots of different ways to bring more and better bass to your Explorer.
To make real noise, there’s plenty of room in the cargo area of the Explorer, especially if you don’t have a third-row seat, and several compartments in panels and underneath floorboards to tuck amps.
The JL Audio Stealthbox is made to fit right into the Explorer. With a vehicle like the Explorer, there are lots of ways to upgrade your entertainment. When you replace the factory radio, your Explorer’s factory DVD system won’t work anymore. You can replace it with an aftermarket DVD system, though.
Can you replace the factory radio on a Ford Explorer?
When you replace the factory radio, your Explorer’s factory DVD system won’t work anymore. You can replace it with an aftermarket DVD system, though. Give us a call and we’ll help you find something that’ll keep your backseat passengers happy.
When you replace the factory radio, your Explorer’s factory DVD system won’t work anymore. You can replace it with an aftermarket DVD system, though. Give us a call and we’ll help you find something that’ll keep your backseat passengers happy.
Is there a wiring diagram for a 2004 Ford Explorer?
Whether your an expert Ford Explorer mobile electronics installer, Ford Explorer fanatic, or a novice Ford Explorer enthusiast with a 2004 Ford Explorer, a car stereo wiring diagram can save yourself a lot of time.
Where is the factory amplifier on a Ford Explorer?
Use a Car Radio Wire Harness and Car Radio Dash Kit for an Easy Car Radio Install! Use an Amp Integration Harness to Connect Your Factory Amplifier to an aftermarket radio. If equipped, the factory amplifier is located behind the trim panel on the right side of the cargo area.
Whether your an expert Ford Explorer mobile electronics installer, Ford Explorer fanatic, or a novice Ford Explorer enthusiast with a 2004 Ford Explorer, a car stereo wiring diagram can save yourself a lot of time.
Use a Car Radio Wire Harness and Car Radio Dash Kit for an Easy Car Radio Install! Use an Amp Integration Harness to Connect Your Factory Amplifier to an aftermarket radio. If equipped, the factory amplifier is located behind the trim panel on the right side of the cargo area.
What do you need to install a stereo in a Ford Explorer?
The wiring harness that helps you install a new stereo in this Explorer uses RCA connectors to connect to the Ford sub. Tools needed: Small Phillips screwdriver, 7mm driver, panel tool
