Does the transfer case use the same fluid as the transmission?

The transmission and front differential share the same fluid (ATF). The transfer case (uses Gear Oil) is a separate unit.

What kind of transmission fluid does a 1993 Ford Ranger take?

Mobil 1 Synthetic Transmission Fluid Dexron/Mercon 1 Quart.

What kind of transfer case does a Ford Ranger use?

For purposes here, the Scout, Blazer, and Jeep versions have been called Spicer 20’s. The C-4/Dana 20 is a popular swap in Ford Rangers. This swap will require modification to the drive shaft lengths. Wild Horses (209-943-0991) offers the Cold Duck Dual Dana 20 transfer case for a low gear ratio of 6.05:1.

How does a ranger station transfer case work?

It consists of a front mounting adapter, a front case and a rear cover that transmits power from the transmission to the rear axle. The input shaft and the output shaft are connected together by a coupling sleeve providing direct drive between the 2 shafts. The case assembly contains no lubricant and none should be installed.

What kind of transfer case does Ford bw4411 have?

Ford BW4411: The BW4411 transfer case has a 28 Spline Input, front cup yoke, rear circular flange, no speedometer hole, no front and rear sensor hole and no rear sensor. Matched with 5R55S transmission. Single speed.

What kind of automatic transmission does a Ford Ranger have?

A4LD – The C3 was modified into the A4LD 4-speed automatic by adding an overdrive gear, which the C3 lacked. This was the first Ford automatic to use an EEC-controlled torque converter lock-up clutch. Electronic shift control for the 3–4 shift was later added, another first, though other gears remained hydraulic.

Which is oil used in Ford Raptor transfer case?

Saw somewhere that Mercon LV ATF is approved to be used in the transfer case. Need confirmation on this. Which oil is currently being utilized? As far as I have been able to determine, Ford has never published the specifications or characteristics of its proprietary transfer case fluid.

What kind of oil is used in transfer case?

2014 owners manual shows Transfer Case Fluid XL12. Saw somewhere that Mercon LV ATF is approved to be used in the transfer case. Need confirmation on this. Which oil is currently being utilized?

Which is Ford Motorcraft xl12 transfer case oil?

As far as I have been able to determine, Ford has never published the specifications or characteristics of its proprietary transfer case fluid. That being the case, then no one could reliably claim to have identified an equivalent. So whats everybody here using? I’m due for a fluid change. I’m going with the Motorcraft XL12.

Does the transfer case use the same fluid as the transmission?