Do you need to replace the front bumper on a 2004 Chevy Silverado?

Perfect for your vehicle… Chevy Silverado SS with Sport Package 2004, Front Bumper Cover by Replace®. Replace bumper covers will come in handy if you need to replace your scratched, dinged, or collision damaged cover to restore your prized possession’s aesthetic…

How do you remove a front bumper cover?

Under the Bumper cover there are 4 plastic pins that need to be remove. 2 in the middle one on the left and right of the Bumper Cover. Push up on the bumper cover to reveal a small gap. Take the pliers and gently wiggle them (all 4) back and forth while pulling down but not to hard you will damage the pin if you pull to hard.

What kind of Bumper pads do Chevy Silverado use?

Chevy Silverado 1500 / 2500 Fleetside 2004, Rear Bumper Step Pad by TruParts®. This premium rear step bumper pads is in a league of its own when it comes to quality replacement of a damaged or cracked component. The reliable TruParts…

What’s the best way to install a car bumper?

Take the pliers and gently wiggle them (all 4) back and forth while pulling down but not to hard you will damage the pin if you pull to hard. Gently push the screwdriver pulling the box towrds you. Make sure you do not drop the Bumper!! Reconnect the Boxes on the left and right of the bumper. Install the Headlights and Grille and your done!!!

How do you remove a bumper cover from a car?

Place fasteners in plastic bags and label them for easy reassembly. “Engine bay” or “fender liner” will enable you to easily locate where they go. Moving to the front of the fender liner, remove the fasteners there. Then remove the bolts and retainers on the bottom of the bumper cover.

Where are the bolts on a Chevy Silverado front bumper?

With the radiator grille removed, you can access the bolts holding the bumper on the frame. Two upper and two lower bolts are located at the top of the frame. After removing them, move down to the underside of the bumper and remove the bolts that are at each end of the bumper brace.

What’s the best way to repair a bumper cover?

Step 1: Wash with Soap and Water. Start the repairs with a good wash to remove contaminates on the bumper cover. This will assure all silicones are removed which will provide a quality repair.

How much does it cost to replace a bumper tab?

This is critical, as this is what secures and aligns the bumper cover. Many times, a broken tab is all that is wrong with the bumper cover. With the cost of these plastic parts $200 to $700, the replacement cost can break the bank.

Can a rear bumper be used as a bumper?

NBS bumpers are still pretty easy to find used. The rear bumper would probably fit. Please do not attempt the front.

What are the bumpers on a 2004 Chevy Silverado?

FT BUMPER PTD (P) SILVERADO CLASSIC EXC SS 03-07 Partslink # GM1002818 OE # 15200570 RR BUMPER CHR SILVERADO/SIERRA FLEETSIDE P/U 99-07 Partslink # GM1102411 OE # 12473000 Bumper, Rear, Red Steel, Fabricated, Steel, Black Powdercoated, Chevrolet, GMC, Each Bumper, Front, Steel, Chrome, Chevy, Each Partslink # GM1002817 OE # 15287617

Do you need to replace the front bumper on a Chevy Silverado?

Chevy Silverado 2004, Front Upper Bumper Cover by Replace®. Plastic. Replace bumper covers will come in handy if you need to replace your scratched, dinged, or collision damaged cover to restore your prized possession’s aesthetic value…. Chevy Silverado 2004, Front Bumper Face Bar by Replace®.

Do you need to replace the front bumper on a 2004 Chevy Silverado?