Do aluminum transmission pans work?

Do aluminum transmission pans work?

Not only does aluminum help to dissipate heat better, the extra fluid capacity helps to maximize cooling power. Besides that, many people prefer an aluminum cast transmission pan because they are more durable and it makes sealing a breeze. However, deep aluminum pans are often the most expensive.

Is the 545RFE a good transmission?

it’s a fairly reliable transmission, although it can stand to be tuned for better performance. its good to around 400-450 horsepower before you would need to upgrade it. just do your normal maintenance on it and you should be fine as long as you own it.

Do deep transmission pans work?

Yes they are absolutely. I’ve seen the results with my own truck. Back when my 48re was stock just running empty in traffic during summer my temp would hover around 190-205. After I added a cheap b&m pan with 6 more quarts it dropped temps to 145-165 max.

How many quarts does a 545RFE transmission hold?

5 to 5.5 Qts will be be needed to refill after dropping the pan and doing a filter change. Is there a plug to drain the torque converter? Need to do mine soon, and want to do the complete job. thats why i just flush it and it takes about 13/14 quarts to flush and fill the system!

Does transmission pan get hot?

Over 200 degrees is normal for a trans to operate. And that feels really hot to touch. If you’re cooling your tranny with 180° engine coolant, expect it to feel hot.

What is the difference between 45RFE and 545RFE?

The 45RFE and 545RFE are identical mechanically. The difference is in the software. Before you drop the transmission, though, pull the trans oil pan off and look at the valve body. On the passenger side of the main valve body is a cover plate that covers the accumulator pistons.

What vehicles have the 545RFE transmission?

The 545RFE made its way into Chrysler’s entire fleet of rear-wheel drive trucks, save for sedans and coupes: the Jeep Liberty, Dodge Ram, Dodge Dakota, Dodge Durango, and Jeep Commander. It was based on a similar automatic – the 45RFE.

What kills a transmission?

Driving in stop-and-go traffic for an extended period of time; idling the vehicle too long; driving off-road; or using your automobile as a snowplow will also kill your transmission. The engine and transmission is working, but nothing is happening because the wheels cannot move.

What kind of transmission fluid does a 545RFE take?

The top 0.67:1 was probably chosen since that was the largest one that could easily fit without enlarging the transmission, making it too big for the organization’s automobiles. The capacity of the 545RFE transmission is 10.5-11 l, while the fluid type is Dexron 3-6 or MOPAR +4.

How do you cool down a transmission?

Allowing the car to idle in neutral, while sitting at red lights, in congested traffic or at rail road tracks, reduces the strain on the transmission, allowing the transmission to cool.