Most popular

Can you remove AC compressor clutch?

Can you remove AC compressor clutch?

As it wears, it loses its ability to properly engage the A/C compressor unit without slipping. Replacement compressor clutches are available from auto parts stores and automotive dealers. The A/C compressor clutch must be removed with a special puller designed to uninstall it without damaging the A/C compressor.

How do you install a clutch on a GM A / C compressor?

Place the new hub on the frame and tap into place with a piece of wood or use the special puller tool which will also press the new hub into the frame. Press the hub in until the groove is exposed enough to install the large snap ring. Install the large snap ring. Make sure it is seated all the way around.

How to remove the a / C compressor clutch in a Chevy Tahoe?

The A/C compressor clutch must be removed with a special puller designed to uninstall it without damaging the A/C compressor. Turn off the engine and place the SUV in park. Apply the parking brake and disconnect the negative battery terminal using a battery terminal wrench.

How to remove a / C compressor from a car?

Removal 1) Remove compressor from vehicle. Place compressor in Holding Fixture (HD6/HT6 compressor use J-33026; on V5 or V7 compressor use J-34992 or J-41790). On V5 or V7 compressor, remove dust cover (if equipped). Use Clutch Plate Spanner (J-33027-A) to hold clutch plate and remove compressor shaft nut using Shaft Nut Socket (J-33022).

How do you remove a pulley from a compressor?

Remove the serpentine belt and unbolt the compressor from it’s mounts and tilt it up so you can get to the front easier. Use the clutch removal tool to pull off the clutch. Remove the large snap ring in front of the pulley. Spray some WD40 in the hub area and remove the pulley from the compressor.

How do you replace AC compressor clutch?

How to replace an AC Compressor Clutch. To remove the clutch, screw in the removal tool and hold the clutch disc with the holding tool. Remove retaining nut on the compressor shaft while holding the clutch disc with the holding tool. Then install the clutch disc puller.

Can the AC clutch be replaced?

Yes you can just replace the clutch pulley on the a/c compressor. The issue that you may have is the pulley bearing seized up and may have spun on the front of the compressor nose cone and will damage it. You may not be able to get the old pulley off and if you do the new one will not seat and hold on…

Why does my AC clutch not engage?

Why AC clutch won’t engage. If the clutch doesn’t engage, the problem could be a blown fuse, an open in the wire to the clutch coil, a bad clutch coil, a poor ground, or a low pressure lockout. AC compressor clutches receive power in a number of ways.

Can you run car without a compressor clutch?

if the clutch and/or pulley on your compressor are okay, yes, you can continue to operate your vehicle without any issues…without a compressor you will need a bypass pulley and special length of belt.

Author Image
Ruth Doyle