Can I use log burner without baffle plate?
Can I use log burner without baffle plate?
Operating a woodburner without a baffle is unlikely to cause any immediate risk of injury. What it does risk is causing irreparable damage to your stove. As we mentioned, the baffle is there to protect the inside of your stove from intense heat. Temperatures inside a stove are incredibly high.
What is the difference between a register plate and a closure plate?
A register plate is used to seal the base of a chimney cavity when you do not have a chimney flue liner in your chimney. A closure plate is used when you do have a chimney flue liner in your chimney.
Do I need a register plate for my wood burner?
A register plate is a metal sheet that fits across the base of your chimney, just above where a stove would be installed. If byproducts from your wood burning stove or multi fuel stove are being exhausted straight into the chimney (and not into a flue inside the chimney), then you’ll need a register plate.
Does a wood burner need a baffle plate?
Without the baffle plate in the way, stoves wouldn’t be able to produce as much heat because all of the warm air would be rapidly lost up the flue. Baffles can also typically be removed from wood burning and multi fuel stoves because they can be damaged over time, causing them to warp and sag.
What does a log burner baffle plate do?
What does a baffle plate do? The simplest way to describe a baffle plate, which is placed at the top of the fire chamber, is a deflector shield which reflects heat back into the combustion chamber. This ensures that as much heat as possible is retained in the stove and emitted into the room in a controlled manner.
How thick should a register plate be?
Register Plates It acts as a barrier to prevent the smoke and fumes in the chimney entering the room. The register plate must therefore make a sturdy seal between the room and the chimney and MUST be made of galvanised or stainless steel (or other non-rusting metal) at least 2mm thick.
Do I have to fit a register plate?
A Register Plate should always be fitted whenever a stove vents directly into the chimney (ie if the chimney is sound and there is no flue liner connected directly to the stove or stove pipe). The purpose of this register plate is to ensure no fumes, especially Carbon Monoxide, escapes back into the room.
Why do you need a register plate on a wood burning stove?
A stove register plate seals off the connection between the flue pipe and the chimney. That stops all the heat escaping up the open chimney and also stops debris and dust from falling into the room and onto your stove.
Where is the adapter on a steel register plate?
If you use a steel register plate it is better (if it will not cause an eyesore) to keep the joint between flue pipe and flue liner, below the register plate A special collar, or adapter is used to join the top of the flue pipe to the bottom of the flexible flue. Sit the flexible liner into the collar so it is located centrally.
What should a register plate be made out of?
The register plate must be be made of a non-flammable material and fit round the wood burning stoves flue pipe while blocking off the opening to the chimney stack. Some people use fire proof board for register plates because it is easy to cut to measure, very light and easy to position.
When to use a closure plate or a register plate?
A closure plate and a register plate are not the same. A register plate is used when a chimney has no stainless steel liner. It closes off the chimney at its base, just above a wood burning stove.
