Are ball joints checked on MOT?

Ball joints are checked when the car is taken for an MOT and excessive wear can result in an MOT failure.

Is a track rod end the same as a ball joint?

A track rod end is fitted at each end of the steering rack which is why it is so important. They enable you to steer your car smoothly. It incorporates a ball joint that attaches to the steering knuckle. The track rod end’s ball joint enables movement up and down and from left to right.

Which is the best ball joint for Ford Fiesta?

Ball Joint by MOOG®. MOOG ball joints are the preferred choice of many professional technicians and incorporate proven design and advanced engineering features to ensure like-new steering and suspension, simple installation, and… Professional™ Ball Joint by ACDelco®.

What do the front ball joints on a car do?

They are one of the main suspension pivot points that connect the control arms of the vehicle to the steering knuckles or spindles. The front ball joints also allow the front wheels and suspension to move back and forth, as well as up and down, as the steering wheel is turned during driving and as the car moves over uneven road surfaces.

What does it mean when your ball joints are not working?

If the ball joints are working well, there should be little to no play in this movement. Noise and play from the top – this indicates a problem with the upper ball joint. Noise and play from the bottom – this suggests a problem with the lower ball joint. 5.

What do you need to know about steering Mot?

2. Steering Mechanical condition, steering wheel and column or handlebar, forks and yokes, steering play and electronic power steering (EPS) rules and inspection for car and passenger vehicle MOT tests. 2.1. Mechanical condition 2.1.1.

How do you replace a ball joint on a front wheel drive car?

Generally a job to replace ball joints will involve the following, but not exclusive to these steps: Taking off your vehicle’s wheels. Moving the brake calipers, and rotor. Some vehicles will need the sway bar links removed. Front wheel drive cars – in most cases, separate the lower control arm from the steering knuckle via a ball joint fork.

How to check for worn ball joints in your car?

How to check ball joints visually. 1 1. Check your tyre wear. Loose ball joints can’t keep your suspension aligned while you drive. This accelerates tyre wear by causing the rubber tread 2 2. Loosen the lug nuts. 3 3. Jack up the car and place wheel chocks behind the wheels. 4 4. Rock the tyre on its axis. 5 5. Remove the wheel.

Are ball joints checked on MOT?