Why is my GE dishwasher flashing 888?
Why is my GE dishwasher flashing 888?
Drain line/air gap A clog in the drain line or air gap (if there is one) is the usual reason that a dishwasher won’t drain. Often the problem is at the point where the drain line attaches to the garbage disposer or household drain line. If you remove this line, you can clear any debris from the hose or hose connection.
What does 888 mean on a GE dishwasher?
888 means the PC board is shorted and the display driver that shows what supposed to be a display is not working,I would take the PC board out of the machine,look for water corrosion,it will be like a white puffy kind of stuff,if you see that,you have water damage from some other part inside.
How do I force my LG dishwasher to drain?
Force the Drain. This is activated by pressing and holding 2 buttons simultaneously e.g DELICATE + DUAL CONTROL. The 2 buttons may vary depending on your model. If your model does not have a CANCEL & DRAIN option, start a cycle, let it run for 45 seconds, then power the unit off.
What does trouble code 15 on the thermistor mean?
Typical thermistor resistance values are: Trouble Code 15 indicates that the Coolant Temperature Sensor ( CTS) is reporting abnormally low readings. CTS is used to control fuel mixture, timing, idle speed, TCC and EGR operation, among others. The thermistor used has a high resistance when cold, lowering as the coolant warms.
What does trouble code 23 on mat sensor mean?
Trouble Code 23 indicates that the Manifold Air Temperature (MAT) sensor is reporting abnormally low readings. When the air is cold, the thermistor in the sensor has a high resistance, which falls as the air charge warms.
What does error code 63 mean on Rinnai?
Error Code 63 What it Means: Circulation flow rate dropped below 1.3 gpm. How to Fix: Use temperature controller to display flow rate (hold UP for 3 seconds and press the ON/OFF button).
What does error code 25 mean on Rinnai Water Heater?
If tank is correctly draining but error code 25 persists, replace the condensate tank and sensor. What it Means: Flammable vapors detected. How to Fix: IMPORTANT: Leave the area the water heater is installed in until safety personnel have identified the area as safe and all flammable vapors have been eliminated.
