Why does my Bobcat 753 loose lift and tilt?

I have a Bobcat 753F which works great for about the first 20 minutes, then I loose lift and tilt on the bucket, but it still drives. If I let it sit for a few hours the bucket functions come back just for a much shorter time. I thought it was the BICs solenoid, however when I replaced it the problem still exists.

Is there a problem with my Bobcat 753 starter?

Discussion in ‘ Skid Steers ‘ started by Ralph, Dec 23, 2007 . Helpâ€¦ I lose more husband points everyday this sits in the yard! I bought a Bobcat 753 that has been sitting idle. Installed new starter. Panel comes up and I get 3 of 4 lights (Traction/Parking light does not come on). No Trouble Codes are displayed. Unit has 3,150 hours.

What is traction lock solenoid error on bobcat S205?

Traction lock pull solenoid circuit ERROR OFF (Should be ON). Loader can be moved forward & backward. Loader cannot be moved forward and backward. Loader cannot be moved forward and backward.

What are the warning signs on a bobcat?

HP – Hydraulic Oil Pressure -1 – Shutdown (Engine can be restarted for 30 second periods to move loader) -2 – Warning The versatile Bobcat quickly turns into a multijob machine with a tight-fit attachment hook-up …etc from bucket to grapple to pallet fork to backhoe, and a variety of other attachments.

Traction lock pull solenoid circuit ERROR OFF (Should be ON). Loader can be moved forward & backward. Loader cannot be moved forward and backward. Loader cannot be moved forward and backward.

What is the problem with the bobcat S300?

We are having a problem with the bobcat s300 that we have. You start it up and seconds after that the tilt/lift light comes one. ACS error. The reference guide just says acs error tilt/lift. We noticed it was a bit damp under the cab so we took the cab back and left it inside all weekend with a fan on it in a heated shop.

What’s the problem with my Bobcat lift tilt?

We noticed it was a bit damp under the cab so we took the cab back and left it inside all weekend with a fan on it in a heated shop. Worked fine today for about an hour then beep beep acs error. We have a full service manual on order but it probably wont be in till tomorrow and we might need to load some sand/salt tonight.

What happens when you let off handle on bobcat lift?

Sometimes the loader would dump fine and other times it would dump very slow. If you let off the handle and tried to dump again it would go full speed. After a while it would sound the alarm (beeeep!) and stop all loader function. Loader light would come on (little yellow light on the “activate the loader button”).

How does a manual release work on a bobcat 753?

The only way the manual release has a connection to the tilt circuit is via the internal BICS pressure that opens the lock valves. It just seems you’re loosing internal BICS pressure. Now if this theory has merit, I would pull the BICS spool and the lift and tilt lock valves, inspect the o-rings closely.

Why does my Bobcat 751 steer to the right?

When driving straight forward the machine tracks to the right i have to pull right stick back some. When reverse the machine tracks to right as well, i have to keep the left stick throttled way back.

How can I get my Bobcat 751 to steer?

When i pull it back it moves very very slowly. If i jerk it back it acts just as if i jerked it forward full power and speed. When i push the left drive stick forward its very slow identical to the right side backward. When i pull it backward it works great same as right stick forward.

When did the first Bobcat lift go bad?

First one went bad at 3am during a big storm (probably around 1000 hrs on machine). The second one (tilt) has been going bad for a while now. It was an intermittent problem. Sometimes the loader would dump fine and other times it would dump very slow.

How does a bobcat lift actuator probelm work?

I’d put it in float, it would work fine then all of the sudden it would put pressure on the bucket and lift the front of the machine. Finally it stopped all together.

Can a bobcat 753 drive a skid steer?

Discussion in ‘ Skid Steers ‘ started by calliso6, Apr 19, 2014 . I have a Bobcat 753F which works great for about the first 20 minutes, then I loose lift and tilt on the bucket, but it still drives.

Can a bobcat mechanic replace the lift arms?

Your biggest issue may be trying to identify which actuator is the one needing replacement (which one is bucket tilt & which is lift arms). A repair manual would probably handle this, or your Bobcat mechanic should be able to help with this. I would expect them to help even though they are not doing the work.

What’s the code for a bobcat lift tilt?

I was just working on trying to figure ours out. The code it is posting is 32-50 (bad ground to the tilt actuator). I just looked over all the wires in the harness going from the joystick to the actuator for loose wires or wires with rubbed open spots, but couldn’t find anything.

Who is the expert on bobcat left steer control?

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard. An expert that got 20 achievements. An expert that got 10 achievements. Re: Bobcat 753 – left steer control is not working at…

Is the bobcat 763 able to move snow?

What’s New? I have am using a Bobcat 763 to move snow. We used it all day yesterday and not problem and today it will not lift. It moves forward just no lifting of the bucket. What could be the problem?

Is the bobcat model 763 skid steer no lift?

Bobcat model 763 skid steer no lift no tilt. – YouTube Bobcat model 763 skid steer no lift no tilt. If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.

Why did my bobocat 763 not work Last Night?

Turned off last night and now it will not work. We have no tilt and the pedals feel like they are locked. We can not push them. The problem seems intermittent it was real cold last night could that have be any problem?

Is there a problem with my Bobcat snow plow?

BOBCAT ACS (lift tilt) Problem | The largest community for snow plowing and ice management professionals. Find discussions on weather, plowing equipment and tips for growing your business. We are having a problem with the bobcat s300 that we have.

Where is the bucket release switch on a bobcat 753?

Discussion in ‘ Skid Steers ‘ started by RODBUILDER, Feb 13, 2016 . I have a later model 753 that has the bucket release switch under the “ignition” key. It starts great and motivates with no problems, BUT the foot controls don’t release all the time.

How does the BICS work on a bobcat?

If there’s a fault it will flash on the LED lights on the BICS controller. But even then, it’s not very specific, pretty much tells you there’s a problem with that part of the system. When Bobcat progressed to the G Series machines the BICS diagnostics got way better, much like OBDII.

Why is there no boom on my Bobcat 753?

1. When you hit the electric switch under the key you can hear the solenoid valve clunk. 2. The foot peddles DO move, but if the problem is there all you get is a growl from the pump – like the hydraulic fluid isn’t being allowed to flow through the lines, and there’s no boom or bucket tilt. 3.

Is the bobcat 753 skid steer a quick hitch?

The 753 Skidsteer from Bobcat comes equipped with a universal skid steer quick hitch. This will allow you to connect a wide variety of skid steer attachments to this loader.

What does lift / tilt lock on bobcat 753 do?

BTW, the clunk you’re hearing when you push the button to operate the machine is the parking brake solenoid releasing the brake, the lift/tilt lock is a different part of the system. That’s a 753 F Series machine.

Where is the BICS controller on a bobcat 753?

Yes, on the C and F series machines, the BICS controller is in an awkward spot to view, mounted on the rear panel to the right of the seat, but when this problem comes up you need to try and view the LED lights on the BICS controller and see if the LED for Lift/Tilt lock is flashing a code.

Why is my Bobcat 763 not lifting snow?

I have am using a Bobcat 763 to move snow. We used it all day yesterday and not problem and today it will not lift. It moves forward just no lifting of the bucket. What could be the problem? This is a loner and I am not real familiar with its internal parts. If you could explain where to look for the problem I can navigate around the machine.

Why are the pedals locked on my bobocat 763?

Check to see if there is an individual mechanical pedal lock! Our is a JD, but it does something similar. It is very likely to be a safety interlock problem instead of a real problem (like frozen something or low fluid, etc.) because it’s an intermittent problem and the pedals are LOCKED.

Do you have a bobcat T300 with 700 hours?

We have a Bobcat T300 with 700 hours (

Where is the pump outlet on a bobcat 753?

The pressure outlet fitting of work pump is on the backside (engine side) of pump, be sure and check that area for failed o-ring on pump outlet fitting. Still don’t see leak, lower cab enough to drop seat bar and activate drive/equipment enable button, raise cab back up.

How to stop hydraulic fluid gushing in Bobcat 753?

Move drive levers back and forth checking for leaks in drive pumps and motors. Operate the foot pedals, gently raise loader arms. Remember, arms are only going to raise a bit because you have the safety prop fitted. Gently let arms back down to prop being careful not to cram it into safety prop too hard. Operate the bucket tilt up and down.

Is there a problem with my Bobcat 753?

Discussion in ‘ Skid Steers ‘ started by wayne186, Jan 6, 2008 . I have a problem that I hope somebody can help me with, I have a Bobcat Advantage series 753 and it refuses to move. Engine starts fine but if I try to move it forward or backwards it will only go an inch or so and locks.

What’s the problem with my Bobcat Traction Lock?

The problem was progressive – it would sometimes lock when i was working, and over a period of a few days got worse, now it won’t move at all. The lock engages seconds after i disengage it after starting the bobcat. I have check the voltage at the solenoid – it is 7.5v instead of the required 12v.

What’s the problem with my skid steer bucket?

The bucket slowly tilts forward and when lifted the arms or whole lifting frame drops slowly. I have to keep operating the foot pedals to tilt it up and lift it up. Can you please help identify the problem and how to fix it? Submitted:9 years ago. Category: Heavy Equipment Show More Show Less Ask Your Own Heavy Equipment Question

Why is my Bobcat stuck on the barn floor?

Traction Lock hold open circuit. After going into the more information section it says this: I use my bobcat for odd jobs around the property and right now it is stuck on my barn floor and I need to move it as it is blocking my exit. I used it two days ago, parked up and no problems but now it is being a stubborn mule

Why does my Bobcat 753 loose lift and tilt?