Why does my 1999 Chevy S10 not start?
Why does my 1999 Chevy S10 not start?
That truck is known for ignition switch failure, not the key one but the electrical switch at the lower column. 1999 Chevy S-10 PU 4.3 ltr. engine, won’t start when wet, once it dries out and the weather clears it will start. We’ve replaced cap, rotor, plugs, fuel pump and fuel injectors.
Why does my Chevy S10 ZR2 not start?
Anyone got a suggestion I have a 2000 s 10 zr2 with 129000. If the truck has sat for more than 24 hours in the cold it wont start. It turns over fine, it has fuel pressure, i can smell unburned fuel from the exhaust pipe. I’ll try to start it for a few days with no luck.
Why does my Chevy S10 not start when wet?
That truck is known for ignition switch failure, not the key one but the electrical switch at the lower column. 1999 Chevy S-10 PU 4.3 ltr. engine, won’t start when wet, once it dries out and the weather clears it will start. We’ve replaced cap, rotor, plugs, fuel pump and fuel injectors. Check engine code of P0300 (random misfire).
What kind of engine does a 1999 Chevy S10 have?
1999 Chevy S-10 PU 4.3 ltr. engine, won’t start when wet, once it dries out and the weather clears it will start. We’ve replaced cap, rotor, plugs, fuel pump and fuel injectors. Check engine code of P0300 (random misfire). Can anyone help this is getting very frustrating! How about the ignition wires, not mentioned.
What kind of power loss does a 1999 Chevy S-10 have?
Well on the power loss. That truck is known for ignition switch failure, not the key one but the electrical switch at the lower column. 1999 Chevy S-10 PU 4.3 ltr. engine, won’t start when wet, once it dries out and the weather clears it will start. We’ve replaced cap, rotor, plugs, fuel pump and fuel injectors.
Why does my 2001 S10 have a hard starting problem?
My 2001 S10 has a hard starting problem if the truck sits between 1 to 4 hours. It starts fine if left over night. Has 46,000 miles. Cranks for about ten seconds before it starts. some part of your fuel injector is leaking into the manifold. Have fuel pressure tested, have a feeling it will shoot up to the desired 60 psi then fall back now quickly.
What kind of problems does a 1999 S-10 have?
My 1999 S-10 has some hesitation issues and my mechanic said I needed a new fuel pump. He put one on and since then the truck starts instantly when it’s cold but when it is warm and has set for a while it will crank for a while before it starts.
Why does my car stall at low rpm?
The will likely force your computer to stall the engine and only allow it to run at low RPMs, which means the car will only move at slow speeds. This is a safety feature enforced by the computer so that your engine doesn’t get too damaged.
What is the diagnostic code for engine stall?
Diagnostic trouble codes P0120, P0121, P0122, P0123, and P0124 are what will commonly appear. The engine can stall for no reason and without any warning. This happens when the TPS gives incorrect information to the ECM. The engine can stall at high speed, at low speed, or even at idle.
Why is my Sonoma S15 not starting properly?
No warnings, like sputtering, or misfiring sounds, just suddenly wasn’t there. From that he was now pretty sure it was the trucks computer, and when I told him that the first time we did a engine diagnostic the fuse that let the computers talk was missing, he became certain that it was the computer.
That truck is known for ignition switch failure, not the key one but the electrical switch at the lower column. 1999 Chevy S-10 PU 4.3 ltr. engine, won’t start when wet, once it dries out and the weather clears it will start. We’ve replaced cap, rotor, plugs, fuel pump and fuel injectors.
That truck is known for ignition switch failure, not the key one but the electrical switch at the lower column. 1999 Chevy S-10 PU 4.3 ltr. engine, won’t start when wet, once it dries out and the weather clears it will start. We’ve replaced cap, rotor, plugs, fuel pump and fuel injectors. Check engine code of P0300 (random misfire).
Well on the power loss. That truck is known for ignition switch failure, not the key one but the electrical switch at the lower column. 1999 Chevy S-10 PU 4.3 ltr. engine, won’t start when wet, once it dries out and the weather clears it will start. We’ve replaced cap, rotor, plugs, fuel pump and fuel injectors.
Anyone got a suggestion I have a 2000 s 10 zr2 with 129000. If the truck has sat for more than 24 hours in the cold it wont start. It turns over fine, it has fuel pressure, i can smell unburned fuel from the exhaust pipe. I’ll try to start it for a few days with no luck.
