Why did one headlight go out?
Why did one headlight go out?
The likely cause is a fuse, headlight relay, headlight switch, dimmer switch or a wiring fault. About the only cause that is an easy fix is a blown fuse. Consult your owner’s manual to locate the main fuse for the headlight circuit and replace that fuse with one having the same amp rating.
What happens when you turn on the headlights?
When you turn on your headlights, that switch activates a relay. That relay, in turn, actually provides the electrical connection between your headlight bulbs and the battery. Fuses are also involved in order to provide a sacrificial failure point to protect the rest of the wiring.
Why are my headlights not working in high beam?
If just one bulb fails to work in either high beam mode or low beam mode, it may be the bulb. Most headlight failures that are limited to just high or low beams are related to a relay or the high beam control switch.
What should I do if my headlight is not working?
Unplug the light, pull the switch, and see if the fuse blows. If not, the problem is not in the wiring. Make sure you have purchased the correct wattage of bulb. Ensure that you do not have a faulty or damaged bulb. Check and see if your high beam bulb is the issue. If so, replace it. Check all wired connections and look for any exposed wiring.
Why does my Malibu headlight keep going out?
I have a 2012 Chevy Malibu and the passenger headlight keeps going out. Not burning out, but quits working! I changed the bulb about 5 times before I realized that it wasn’t burning out. All the other lights on that side work fine. A few times I could tap on the headlight assembly and it would come back on.
When you turn on your headlights, that switch activates a relay. That relay, in turn, actually provides the electrical connection between your headlight bulbs and the battery. Fuses are also involved in order to provide a sacrificial failure point to protect the rest of the wiring.
I have a 2012 Chevy Malibu and the passenger headlight keeps going out. Not burning out, but quits working! I changed the bulb about 5 times before I realized that it wasn’t burning out. All the other lights on that side work fine. A few times I could tap on the headlight assembly and it would come back on.
What should I do if my headlight light is not working?
The best way to do this is to turn the headlight switch on, connect the negative lead on your meter to a known good ground, and touch the positive lead to each headlight connector terminal. One of the terminals should show battery voltage, and the other two should show nothing if the problem is burned out bulbs.
When to go to the mechanic for a burned out headlight?
Fixing a burned-out headlight is usually a pretty easy job, but there are cases where you may want to go straight to a mechanic. If you don’t own some basic tools and diagnostic equipment, like screwdrivers and a voltmeter, then you may want to think about taking your car to a professional during daylight hours.
