Why did my check engine light come back on?

Took my car to an exhaust place, they said it was my O2 sensor or my catalytic converter. I had them change my sensor, drove 10 miles and my check engine light came back on, so I figured it was the catalytic converter. Three days after that, the check engine light turned off.

How to reset check engine light with OBD-II?

1 Connect the scan tool to the OBD – II Connecting the scan tool to the OBD- II ( On- board diagnostic connector) under your steering column. 2 View error codes by pressing the “READ” button Pressing the “READ” button on the scan tool to see the error codes of the engine. 3 Remove the error code

How to reset check engine light with scan tool?

Use A Scan Tool 1 Connect the scan tool to the OBD – II Connecting the scan tool to the OBD- II ( On- board diagnostic connector) under your steering column. 2 View error codes by pressing the “READ” button Pressing the “READ” button on the scan tool to see the error codes of the engine. 3 Remove the error code

What causes the engine light to turn off?

The error codes should be deleted which will cause the engine light to turn off. (Note: this method may not word on all car computers). In case, the car battery is disconnected and the light comes right back on, this may show an active problem and should be addressed and fixed. 3. Turn The Ignition On And Off

How can I tell if I need to replace the oxygen sensor?

If it is not within spec replace the sensor. And as stated earlier depends on your emissions rating, pins number three or number number will be the power supply. With the key on engine off you should see battery voltage to one of those pins.

Is it possible to reset an engine warning light?

While the documentation for some older cars provided instructions on how to check and reset engine warning lights, it’s not usually possible now cars have grown more sophisticated. It’s well worth paying for accurate diagnosis, though, so a proper and effective repair can be made.

How to get rid of the ” Check Engine ” light axleaddict?

If it does not go off, then your engine has a problem. 1. Drive car and let light go off by itself. 2. Turn engine on and off three times in a row. 3. Disconnect and reconnet the battery. 4. Use an OBD code reader. 1. Drive Your Car and Let the Light Go off by Itself

What should I do if my Honda check engine light is not working?

Check to see that all electronics in the vehicle are working properly (e.g. dash light, 12-volt power supply, interior lights). If everything is working properly, I would either test all the fuses (using a test light or a voltage meter is the fastest way to do that) or return the vehicle to the person who did the work. 5.

Why does my Check Engine Light never come on?

If the “Check engine” light does not come with the ignition ON, it’s possible that there is no power coming to the engine computer (e.g. due to a broken wire, faulty main relay, blown fuse, etc.) or that there is a problem with the engine computer itself.

What should I do if my check engine light appears?

If the check engine light comes on, here are some tips on what you should do: Look for a serious problem that requires immediate attention. Check your dashboard gauges and lights for indications of low oil pressure or overheating. Try tightening your gas cap. This can often solve the problem. Reduce speed and load. Use built-in diagnostic services, if available.

Why check engine light is still on?

One Sensor has a Loose Electrical Connection or is Damaged.
trucks and SUV’s are very carefully monitored for fuel economy and emissions.
Damaged O2 sensor.
Catalytic Converter is Clogged.
Air Filter or Fuel Filter is Dirty.
Mass Air Flow Sensor is Damaged.
Engine has Oil Lubrication Issues.

What are causes for check engine light to come on?

Common Causes of a Check Engine Light Loose gas cap Cracked or otherwise faulty gas cap Worn spark plug or wire Faulty oxygen sensor Catalytic converter trouble Faulty mass airflow sensor

When does the service engine soon light come on?

If your Check engine light is ON, the easiest way to diagnose this problem is to always check your trouble code memory with an OBD2 scanner. The check engine light will not light up if there is a scheduled service as the service engine soon light. It does only occur when there is a problem with your engine.

What to do if your engine maintenance light goes out?

Check your engine control unit for any stored trouble codes. If you receive any codes, save them and try to get information about what they mean. If there are codes for emission problems that are not dangerous for your engine, you can try deleting the code to see if the engine maintenance light goes out.

Is the service engine light a Dirty Little Secret?

Money Saving Products I Use Search The Service Engine Light: Your Mechanic’s Dirty Little Secret Last updated: January 16, 2021 G.E. Miller214 Comments Troubleshoot the Check Engine Light]

If your Check engine light is ON, the easiest way to diagnose this problem is to always check your trouble code memory with an OBD2 scanner. The check engine light will not light up if there is a scheduled service as the service engine soon light. It does only occur when there is a problem with your engine.

Check your engine control unit for any stored trouble codes. If you receive any codes, save them and try to get information about what they mean. If there are codes for emission problems that are not dangerous for your engine, you can try deleting the code to see if the engine maintenance light goes out.

Money Saving Products I Use Search The Service Engine Light: Your Mechanic’s Dirty Little Secret Last updated: January 16, 2021 G.E. Miller214 Comments Troubleshoot the Check Engine Light]