Why are my brake lights not working on my Chevy Malibu?

Another person may be needed to test the brake lights after completing the repair. The GM technical service bulletin or “TSB” for this problem indicates that the cause of the issue is “terminal fretting corrosion” inside the BCM (body control module) C2 connector. On this Malibu and many others, the ” C2 ” connector is actually labeled ” J2 “.

Why do the brake lights stay on when you release the pedal?

How to stop the brake lights from staying on when the brake pedal is released on a 2004 to 2007 GM Chevy Malibu. This automotive how-to guide was specifically written to assist owners of the 2004, 2005, 2006 & 2007 GM Chevrolet Malibu in fixing the problem where the brake lights stay on even with the brake pedal released.

What to do when your brake lights won’t turn off?

If your brake lights won’t turn off, here’s a quick fix for your problem. Brake light sensors are an inexpensive part that may need adjusted, as you may find out when your lights won’t turn off. Loading…

Why are my abs and brake lights not working?

This is how I fixed my intermittent ABS and Brake dash lights on my Chevrolet blazer with the Kelsey-Hayes EBCM module, with out spending 1500 bucks on a new EBCM.. You may have code C0265 “Electronic Brake Control Module Motor Relay Circuit.” The fault is usually due to broken solder joints on the circuit board.

What do the brake lights on a Chevy Malibu mean?

Sure enough, the Malibu started up normally in “Park” with the brake lights turned off as expected. I watched the tail lights behind the car while my friend tapped on the brakes while saying “on” and “off” to indicate what he was doing with the brake pedal.

What are the warning lights on a Chevrolet?

The following are warning lights and indicators found in vehicles built by Chevrolet. Click a link to learn more about each one. They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray). There are nearly 50 of them so search carefully!

The brake lights will illuminate on their own without depression of the brake pedal and the brake lights will turn off upon depressing the brake pedal. Cruise control will also not function when this malfunction is occurring. I am convinced this is the same problem that prompted a recall back in 2014.

Are there any problems with the 2009 Chevy Malibu?

See all problems of the 2009 Chevrolet Malibu . Tl the contact owns a 2010 Chevrolet Malibu. The contact stated that the rear center brake light failed to illuminate while driving 40 mph. The contact mentioned that the center brake light was repaired twice.

When do the brake lights fail to illuminate?

The brake lights fail to illuminate when the brake pedal is pushed. This has been an on going problem and we only realize it still exists when one of our family is following the 2010 Malibu in another car.

Are there any recalls on 2012 Chevy Malibu?

Gov for any recalls on my 2012 chevy Malibu, I found one from may 2014 that described exactly the problem I was having with my vehicle: loss of vehicle stability traction control, cruise control and random illumination of brake lights.

Why does my GM ABS brake still run?

The antilock brake system (ABS) is controlled by its own computer. When it senses a problem, the ABS module on the dashboard will light up. When the problem is fixed, the module will sometimes still stay on, and it will need to be rest.

What kind of brake lights do GM cars have?

Description: Silverado, sierra. Power Adjustable Pedals. Without active brake control. Description: XT5. XT6. Acadia. Enclave. Traverse. Blazer. 3.6l. Blazer. 2.5l. Without e-boost. Brake pedal position sensor. Description: Verano. Description: Auto trans. Canyon, Colorado. Brake pedal position sensor.

Why are my brake lights not turning on?

Update – If the ESC (electronic stability control) and/or TCS (traction control system) indicator lights are shown on the dashboard and your brake lights are not turning on even when you apply heavy pressure to the brake pedal, the issue can be solved in the same manner. It may also be helpful to apply some dielectric grease to the pins.

Why is my brake warning light still on?

Brake Warning Light, Still On After Fixing a Brake Line. After replacing a brake line ,the brake warning light was still on. The float in the master cylinder was stuck.This will sometimes happen when most of the fluid has been lost out of the master cylinder.Sometimes it can take a bit to get it unstuck. The dash lights should all be off when done.