Where to find IATA Guidance on airport fuel storage capacity?
Where to find IATA Guidance on airport fuel storage capacity?
Appendix 1 – Draft “Checklist” of the measurable parameters that are relevant to each of the potential purposes Appendix 2 – Worked example London Heathrow Airport Appendix 3 – Worked example Athens International Airport Appendix 4 – Worked example Hong Kong International Airport IATA Guidance on Airport Fuel Storage Capacity – Edition 1
How is the fuel pressure set in a GM return system?
Fuel Pressure Explained. With a return system, the base pressure is set with the engine off, but the pump running. For a GM, this pressure is usually set to 58psi (factory fuel pressure in the rail). The vacuum/boost referenced regulator will help to change the pressure in the rail based on the pressure in the manifold.
How is pressure controlled in a fuel injection system?
Another means is to vary the effective displacement of the high pressure pump. By carefully controlling the amount of fuel entering the pump and avoiding compression of excess fuel to high pressure, the fuel injection system hydraulic efficiency can be improved and generation of excessively high fuel temperatures can be avoided.
How to change the timing on a fuel injection pump?
Remove the fuel injection pump timing cover. Rotate the fuel injection pump driveshaft in the direction of pump rotation to align the timing line on the weight retainer hub with the line on the cam ring. Position the fuel injection driveshaft locking key plate in the locked position.
Remove the fuel injection pump timing cover. Rotate the fuel injection pump driveshaft in the direction of pump rotation to align the timing line on the weight retainer hub with the line on the cam ring. Position the fuel injection driveshaft locking key plate in the locked position.
How is fuel stored at an airport depot?
Proceed Understand Current Profile Do Not Proceed IATA Guidance on Airport Fuel Storage Capacity – Edition 1 2 3. Fuel receipt operating hours of the supply modes for fuel delivery to the airport depot 4. Operating hours of the Airport Depot 5.
Where is the injection shaft on a fuel pump?
New and reconditioned fuel injection pumps must be received with the shafts located in this position. At the point of injection, the keyway of the shaft will align with the delivery valve receiving the injection and the illustrated hash mark on the seal housing.
