Where is the thermostat on a 2001 Ford Focus SE?

Where is the thermostat on a 2001 Ford Focus SE?

Replacing the thermostat in the 2001 Ford Focus will only take a few minutes, as the thermostat is located at the top of the engine. The purpose of the thermostat is to regulate the coolant system to prevent the engine from overheating. A faulty thermostat will stick and not allow the coolant to enter the engine.

How do you replace the thermostat on a Ford Focus?

Insert the spring end of the thermostat in the housing. Lay the new gasket around the mating surface of the stationary part of the housing. Place the cover on top and secure it with the three bolts. Tighten the three bolts with a socket wrench. This will create a seal to prevent leaking in the future. Twist the radiator cap off.

How do you replace the gasket on a Ford Focus?

Scrape off the remnants of the old gasket with a razor scraper. Insert the spring end of the thermostat in the housing. Lay the new gasket around the mating surface of the stationary part of the housing. Place the cover on top and secure it with the three bolts. Tighten the three bolts with a socket wrench.

What should I do if my Honda focus is hot?

Place new gasket over the thermostat and replace housing cover. Reattach radiator hose, EGR tube and bracket and the coilpack wiring harness. Refill the radiator with reserve or new coolant. Start your Focus and allow the engine to warm up. Check for leaks. Do not attempt to drain coolant when the car engine is hot.

How do you replace a car cooling thermostat?

The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement. All mounting surfaces on the thermostat housing are cleaned of old gasket material.

Insert the spring end of the thermostat in the housing. Lay the new gasket around the mating surface of the stationary part of the housing. Place the cover on top and secure it with the three bolts. Tighten the three bolts with a socket wrench. This will create a seal to prevent leaking in the future. Twist the radiator cap off.

Scrape off the remnants of the old gasket with a razor scraper. Insert the spring end of the thermostat in the housing. Lay the new gasket around the mating surface of the stationary part of the housing. Place the cover on top and secure it with the three bolts. Tighten the three bolts with a socket wrench.

What’s the best way to warm up a Ford Focus?

Twist the radiator cap off. Pour in coolant to the radiator until the level is full. Start the Focus and allow it to idle. Once the car is warmed up, the coolant level will go down. Pour in additional coolant until the level is full. Tighten the radiator cap. Turn the engine off and close the hood.