Where is the orifice tube located on my 2007 Ford F150?

Does anyone know where the orifice tube is located on my 2007 Ford F150 4.6L V8? I’m located all over the place and cannot find anything. Does anyone have a schematic (diagram) of the HVAC system? Its part of the liquid line on Fords. They are only about 30bucks. Location: Va. Beach, VA.

What are the features of the Ford F-150 Lariat?

Features include optimized wide-span gear spacing coupled with drag-reduction actions plus three overdrive gears. What’s more, you can choose from selectable modes: Normal, Tow/Haul, Snow/Wet, EcoSelect and Sport. SYNC ® 3 is our easy-to-use, responsive voice-activated technology.

How much horsepower does a Ford lariat truck have?

How can an engine displacing just 2.7 liters deliver a robust 325 horsepower and 400 lb.-ft. of torque? Engineer it with the Ford port-fuel and direct-injection (PFDI) system with two injectors per cylinder, dual overhead cam design with variable intake/exhaust cam timing, plus twin intercooled turbochargers for on-demand power.

What are the different modes of the Ford lariat?

Each of the available modes (Normal, Eco, Sport, Tow/Haul, Slippery, Trail, Deep Snow/Sand, Mud/Ruts and even Rock Crawl with the FX4 Off-Road Package), has a unique theme that displays in your cluster, creating an environment that matches your action. Standard on the LARIAT and above.

Where is the orifice tube on a Ford F150?

Yeah, left side looking in from the front, it’s the line that runs from your condenser (behind the radiator) into the evaporator, just below the circle spring connector (which you need a special tool to disconnect). The orifice tube will come out with regular needle nose pliers, and it’ll be red or blue.

Where is the orifice tube located in an auto?

The orifice tube may be located: In the inlet tube to the evaporator. Built into the high pressure liquid line. Inserted into the high pressure line near the condenser. The 5 different types of Auto AC orifice and expansion valves.

What happens if you overcharge the orifice tube?

Overcharging by as little as 2-oz can dramatically reduce the performance of your car’s AC system. MORE is NOT better! Most orifice tubes fail due to contamination in the AC system due to sealer, oil degradation or mechanical deterioration.

What causes an orifice tube to fail in an AC system?

Most orifice tubes fail due to contamination in the AC system due to sealer, oil degradation or mechanical deterioration. Replacing a plugged orifice tube without solving the root problem will result in another plugged orifice tube.

Where is the orifice tube in an AC system?

It is usually installed at the evaporator inlet and works together with the orifice tube to regulate the flow of refrigerant through the vehicle’s AC system. Too much refrigerant flow and the evaporator core will freeze over; too little and the evaporator core will overheat and compromise the efficiency of the AC system.

Can you change the color of an orifice tube?

Orifice tube colors identify orifice diameters. Substitution of different color orifice tubes will not work For example, a white orifice tube cannot be substituted for a yellow or red orifice tube for blue in a Ford. Always follow the manufacturer’s recommendations for the exact color and fit.

Can a bad or failing orifice tube cause a car to freeze?

If the AC evaporator or orifice tube malfunctions, it can cause refrigerant to flow unmetered through the vehicle’s AC system. This can cause the evaporator to freeze over, or frost to form or come from the vehicle’s AC vents.

How do you remove the orifice tube in an evaporator?

Remove the orifice tube using needle nose pliers or removal tool. Note the orientation of the orifice tube. It must go back in the same way. Lubricate the O-rings on the new orifice tube with AC oil. Insert the new orifice tube into the evaporator or LLOT or SLOT.

Where is the expansion valve on a car?

Average rating from 5 customers who received a Check Heating AC. An expansion valve is an AC component that is commonly found on many road going vehicles. It is usually installed at the evaporator inlet and works together with the orifice tube to regulate the flow of refrigerant through the vehicle’s AC system.

How do you turn on the air conditioning in a Ford F150?

Unscrew and remove the valve cap. Connect the hose from a can of the refrigerant to the low pressure valve. Start the truck and turn your air conditioning on high, and make sure the vents are open. Note the pressure reading on the valve, which should be at least 45 psi.

What should the air pressure be in a Ford F150?

Fill until you reach around 55 psi, which is a safe level that ensures you aren’t overcharging the system (and causing some expensive damage). Once full, turn off the truck and disconnect the hose. Replace the valve cap and any components you had to remove to gain access to the valve. Figure 5.

Can a Ford F-150 have a HVAC leak?

This article applies to the Ford F-150. HVAC leaks are a common issue in most vehicles, especially when they really start to rack up the miles.

Do you need to recharge the air conditioner in a Ford F-150?

You finally found and repaired the leaky HVAC problem in your F-150, but now you need to recharge it. This article will walk you through the process of properly recharging your air conditioning to get cool air blowing through your vents once again. This article applies to the Ford F-150.

This article applies to the Ford F-150. HVAC leaks are a common issue in most vehicles, especially when they really start to rack up the miles.

Where is the orifice tube located on my 2007 Ford F150?