Where is the heater on a 1992 Chevy S-10?

The 1992 Chevrolet S-10 pickup shares a platform with the GMC Sonoma. The heater core is actually a small radiator mounted inside the cab on the passenger’s side of the S-10. When the heater is turned on, hot coolant is circulated through the core. A fan blows air through the core where it is warmed and routed through the various vents.

Where is the heater core cover on an S-10?

Remove the entire dash from the S-10. Find the heater core cover on the passenger side of the S-10. There is a thick wire brace attached to the center of the cover. Use ratchet and socket to remove the bolt that attaches the brace to the center of the cover.

How do you remove a heater core from a firewall?

Remove the straps. There is a strap on the top and bottom of the core. Use the ratchet and socket to remove the small bolt from the clamp that holds the two metal tubes that run from the heater core out to the firewall. Pull the heater core straight back to remove it. Reverse these steps to install the new core.

What to do if your Chevy S10 wont turn on?

If playback doesn’t begin shortly, try restarting your device. I served in the US Navy on a nuclear submarine, and now I upload videos on YouTube. Videos you watch may be added to the TV’s watch history and influence TV recommendations.

How long does it take to change a heater core in a Chevy S10?

Items you will need. A Chevrolet S10 truck uses an embedded heater core to circulate coolant through the radiator and heat the interior of the truck. This core can become clogged or leak, requiring replacement. The average backyard mechanic can replace a heater core in about two hours.

What kind of heater does a Chevy S10 have?

A Chevrolet S10 truck uses an embedded heater core to circulate coolant through the radiator and heat the interior of the truck. This core can become clogged or leak, requiring replacement.

How to replace the heater core in a 1997 Chevy S10?

Unbolt and remove the pencil brace on the heater core cover using a wrench and then remove the screws on the cover with a screwdriver. Remove the cover. Remove the screws that hold the heater core straps and the bracket over the heater core tubes.

Can a punctured S10 heater leak coolant?

A heater with a punctured core leaks coolant right into your cabin, but with a new Chevy S10 heater core from AutoZone, you avoid foggy moisture buildup as well as those unusually sweet odors. Enjoy optimal performance during frigid weather by ordering your replacement today.

Where is the heater cover on a Samsung S-10?

Find the heater core cover on the passenger side of the S-10. There is a thick wire brace attached to the center of the cover. Use ratchet and socket to remove the bolt that attaches the brace to the center of the cover. Use the Phillips screwdriver to remove the six screws that hold on the cover.

What kind of air conditioning does a 1992 Chevy S-10 have?

Chevy S-10 Pickup 1992, HVAC Blower Motor by VDO®. The VDO brand product category offers OE quality blower motors, engine cooling fan motors and complete cooling fan assemblies. Professional technicians and DIYers alike want the highest…

How do you cool an S-10 car?

A fan blows air through the core where it is warmed and routed through the various vents. Park the S-10 on a paved level surface. Set the parking brake. Allow the engine to cool down before working on it. Remove the negative battery cable with a ratchet and socket. Remove the radiator cap. Make sure the engine is cool before you do this.

What’s the best heater core for a Chevy S10?

When you’re only getting lukewarm air from your heater or your windows fog up for no apparent reason, grab AutoZone’s aftermarket heater core replacement for Chevrolet S10. Quality S10 heater cores are manufactured with high-strength heating tubes that keep your heater delivering air at the precise temperature you set.

What happens when a GMC heater connector breaks?

The problem with this is that over time, the plastic becomes brittle and breaks off. Because the connector breaks in the middle, you can’t just simply slide the hose over the heater barb and toss on a worm-clamp. Instead, you have to remove the remaining plastic connector.

How do you replace a heater core in a Chevy Cavalier?

Position the replacement heater core and attach the mounting clamps. Replace the heater core cover and reconnect the heater core outlet. Reconnect any hoses that you can reach from the interior of the car.

How do you change the heater core in a Chevy Blazer?

Drain the coolant system by turning the drain plug on the lower left corner of the radiator and allowing the fluid to fall into the drain pan. Uncapping the radiator can reduce the internal pressure. Remove the heater core hoses, on the upper left of the engine bay, by pinching their hose clamps with a pair of pliers and pulling them off.

Where are the radiator hoses on a Chevy Blazer?

Uncapping the radiator can reduce the internal pressure. Remove the heater core hoses, on the upper left of the engine bay, by pinching their hose clamps with a pair of pliers and pulling them off. Some models will have screw-type hose clamps; turning them counter-clockwise will loosen them.

Where is the heater on a Samsung S10s?

The heater core in S10s is behind the main dashboard, and it must be removed to access the core. The front dash panel can be removed by unbolting several screws at the bottom of the panel, then pulling the panel away from the dash.

Can a S10 heater core be replaced on YouTube?

S10 Heater Core Replacement – YouTube This is SO EASY!!! S10 Heater Core Replacement If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.

Where is the heater core located on a car?

Locate the heater core on the vehicle’s firewall. The heater core inlet and outlet pipes are usually located on the firewall separating the engine from the cabin of the vehicle. Its location will vary from vehicle to vehicle so if you have difficulty locating the inlet and outlet hoses, refer to the service manual for your specific vehicle.

What kind of car heater should I replace?

Heater Core Replacement: A-Body Olds, Buick, Pontiac, Chevrolet Vehicles. – YouTube If playback doesn’t begin shortly, try restarting your device.

What causes a heater core to stop working?

If your vehicle’s heater isn’t working as well as it used to, or has stopped working entirely, it may be the result of a clog in your heater core. The heater core is similar to a radiator and is a part of the vehicle’s coolant system. Hot coolant that has passed through other parts of the engine is run through…

What is the role of the heater core in a car?

Your heater core is a vital component of your cooling system that transfers antifreeze into the air, making it hot as it gets pumped into the passenger compartment. Made up of small piping, it’s easy for your heater core to become clogged with coolant if your coolant isn’t changed or flushed regularly.

Where can I get a replacement heater core?

Your heater core is an important component within the coolant system of your vehicle – pumping warm air inside to you and acting as a radiator to your engine. Before you’re stuck in your driveway with a freezing front seat, turn to AutoZone for a replacement heater core. Show of 875 Results.

When do you turn up the heater core?

When the weather gets cold, it’s natural to turn the heater up – so don’t get stuck with a faulty heater core. Your heater core is a vital component of your cooling system that transfers antifreeze into the air, making it hot as it gets pumped into the passenger compartment.