Where is the fuel filter on a 97 Toyota 4runner?
Where is the fuel filter on a 97 Toyota 4runner?
check the inside of the frame rail under the drivers seat. their should be a smallish round canister with a line coming in one side and going out the other, and a bracket holding it to the frame. that is your fuel filter.
Does a 2004 Toyota 4Runner have a fuel filter?
Yes, it’s part of the in tank fuel pump module. The filter is a replaceable part of this assembly. I have an extra filter but haven’t changed it. Probably do this at about 100,000 miles.
Where is the fuel filter on a Toyota 4×4?
Welcome to 4x4Wire! You, your 4×4, and Access… Just aft of the transfer case crossmember, on the inner frame rail at the rear passenger torsion bar mount, is the Toyota 3.0L V6 fuel filter. Looking forward from just under the passenger side torsion bar mount.
How often should you replace the fuel filter on a Toyota 4Runner?
Although the fuel filter doesn’t need to be replaced as often as some of your other filters, such as the air filter, you still need to replace it at some point. The more clogged the fuel filter gets, the worse your Toyota 4Runner will drive.
How do you remove a fuel line nut?
Locate the fuel filter under the driver’s door, along the frame rail. Then, use your wrench to remove the two fuel line nuts on each side of the filter. Pull the lines off, then remove the two bolts holding the filter in place. Figure 3. Disconnect two line nuts and two bolts on top.
What do I need to replace fuel filter?
Nevertheless, the filter is not terribly difficult to access and replace. To replace it, all that is needed is a 14mm box wrench for the fuel lines, a 12mm socket for the filter mounts, some rags, and a drain pan. IMPORTANT! This EFI engine retains fuel pressure at all times.
How to replace the fuel filter on a Toyota 4Runner?
If you think you’re ready for a new fuel filter, read on to learn how to replace it yourself in the Toyota 4Runner. Figure 1. Fuel filter. Disconnect the negative battery terminal, then wrap it in a towel to avoid any contact with metal. This should help relieve the fuel pump of pressure. Figure 2. Disconnect black terminal.
Locate the fuel filter under the driver’s door, along the frame rail. Then, use your wrench to remove the two fuel line nuts on each side of the filter. Pull the lines off, then remove the two bolts holding the filter in place. Figure 3. Disconnect two line nuts and two bolts on top.
When to replace fuel filter on Toyota truck?
This is another time I love having a body lift. An infrequent maintenance item on the Toyota truck 3.0L V6 involves replacing the fuel filter, just as one would do on any engine as the mileage starts to increase.
How do you replace a filter on a Toyota Camry?
Here, the filter and its bracket are removed. The new Toyota filter includes the mounting bracket. Once the lines are removed, use the 12mm socket to remove the two bolts that locate the filter assembly on the frame rail. The old filter assembly can be removed, and the new one put in place.
