Where is the coolant sensor on a Dodge Ram?
Where is the coolant sensor on a Dodge Ram?
The sensor (s) thread into the in intake manifold on either side of the thermostat housing, behind the alternator. You will need to remove the intake piping to find them. Unscrew the air cleaner cover bolt, and un-clip the airbox to set it aside.
What does the coolant temperature sensor do on an engine?
The engine coolant temperature sensor’s job is to measure the coolant temperature for the engine control module. With this information, the engine control module adjusts the air-fuel mixture depending on the temperature. This article will discuss the most common symptoms of a bad coolant temperature sensor, location, replacement cost.
What happens if coolant goes bad on Dodge Ram?
Occasionally, they can go bad and cause some driveability issues. If left unchecked, cooling problems can lead to series engine damage like warped heads. From 1994 to 1997, the Ram had two coolant temp sensors (CTS) to handle the different functions.
Can a bad coolant sensor cause a car to not start?
Some cars use the engine coolant temperature sensor to control the electric cooling fans. You have two separate temperature sensors for the fans, dashboard gauge, and engine management in most cars. However, if your car has a single sensor, a bad engine coolant temperature sensor may result in your fans won’t start at all.
What does the coolant temp sensor do on a Dodge Ram?
The coolant temp sensor (s) have a few jobs. They send a signal to the gauges so you can monitor engine temperature, they tell the radiator fans when to kick on or off, and they let the ECU know how warm the engine is so that it can fine-tune the fuel delivery to give you maximum performance as well as fuel efficiency.
Where is the coolant temperature sensor located on a car?
The first item that needs to be completed after you compiled all of your tools and assets is to locate the coolant temperature sensor. In the image above, you can see that most coolant temperature sensors are located on the top, driver side of the engine. However, the location of this sensor may be different with your specific engine.
Where are the sensors on a Dodge Ram?
On trucks with two sensors, the one on the left of the thermostat housing is the sending unit for the gauge, and the one behind and to the right sends signal to the ECU. Depending on the problem you are having, you will likely just change one or the other. Figure 1.
Occasionally, they can go bad and cause some driveability issues. If left unchecked, cooling problems can lead to series engine damage like warped heads. From 1994 to 1997, the Ram had two coolant temp sensors (CTS) to handle the different functions.
