Where do I get the ignition switch for a Ford Focus?
Where do I get the ignition switch for a Ford Focus?
For just under $150 I ordered the lock housing assembly (part # 9L8Z-3511-A) from the Ford dealer. It comes with the starter switch installed (now I have three of them)but you must use your old keys and lock cylinder.
What’s the lock housing on a Ford Focus?
The lock housing assembly holds the key cylinder on the right and the starter switch on the left and also helps the steering wheel to lock when removing the key. For just under $150 I ordered the lock housing assembly (part # 9L8Z-3511-A) from the Ford dealer.
Where is the starter switch on a focus?
The starter switch is located on the left side of the steering column directly behind the turn signal switch, it was replaced $43, still no start with the key. (I learned after to remove the starter switch but keep the wires plugged into it.
How do you reassembly a 2009 focus?
Put a small torx socket (or nail) in it, push down, pull on the key to remove the tumbler cylinder from the old housing. Put the old tumbler in the new lock housing assembly. OK, reverse everything and you are done. The hardest part of reassembly was getting the bottom steering column cover back on.
Why is the ignition not working on my focus?
At first it happened once in a while. Over time the problem became more frequent. She let it go too long and finally called Dad when the ignition failed to energize the starter at all. The Focus is a 2008 SE bought new with 77,000 miles on it now.
What should I do if my Ford Focus wont start?
2008 Ford Focus. I know someone else with this year Focus and they have the same issue, but apparently Ford only recalled earlier years… I turn the key all the way forward. Nothing happens. I push the key in more or further, then the starter engages. What exactly do I need to replace? The tumbler? Well I found it online.
For just under $150 I ordered the lock housing assembly (part # 9L8Z-3511-A) from the Ford dealer. It comes with the starter switch installed (now I have three of them)but you must use your old keys and lock cylinder.
At first it happened once in a while. Over time the problem became more frequent. She let it go too long and finally called Dad when the ignition failed to energize the starter at all. The Focus is a 2008 SE bought new with 77,000 miles on it now.
2008 Ford Focus. I know someone else with this year Focus and they have the same issue, but apparently Ford only recalled earlier years… I turn the key all the way forward. Nothing happens. I push the key in more or further, then the starter engages. What exactly do I need to replace? The tumbler? Well I found it online.
Can a bad ignition switch cause a car to not start?
by Jonathan Lister. The ignition switch in Ford vehicles is responsible for handling the electrical signals related to starting the vehicle. A failing ignition switch can cause system-wide problems ranging from the ability of the car to start, to maintaining speed and even keeping the radio turned on.
Are there any recalls on Ford Focus ignition switches?
Ford recalled 2000-2004 or thereabouts for ignition switch issues. Did they fix the problem on later years? No, they just keep making it the same way year after year. I know this is “sacrilege” to come on here and say this but I have no other way to put it, I am NOT impressed with this vehicle.
What was the problem with my 2008 focus?
Over time the problem became more frequent. She let it go too long and finally called Dad when the ignition failed to energize the starter at all. The Focus is a 2008 SE bought new with 77,000 miles on it now. I believe this is the first year for the newer body style.
What happens if you don’t turn the ignition key?
Sometimes the ignition key won’t turn or rotate. If that happens the vehicle won’t start, the steering wheel won’t turn and it won’t shift into gear. On a late 90’s or early 2000 GM vehicle this is the way to get it apart so you can replace the tumbler.
The starter switch is located on the left side of the steering column directly behind the turn signal switch, it was replaced $43, still no start with the key. (I learned after to remove the starter switch but keep the wires plugged into it.
What to do if your ignition key won’t turn?
This feature is not available right now. Please try again later. Sometimes the ignition key won’t turn or rotate. If that happens the vehicle won’t start, the steering wheel won’t turn and it won’t shift into gear. On a late 90’s or early 2000 GM vehicle this is the way to get it apart so you can replace the tumbler. Loading…
Why is the key not turning in my Ford Focus?
The key wouldn’t turn in my mother-in-law’s 2004 Ford Focus wagon. After doing some research, I found that apparently this is a typical problem in many Ford vehicles, especially the 2000 to 2005 Focus. I looked around online, and found a few different solutions to the problem.
This feature is not available right now. Please try again later. Sometimes the ignition key won’t turn or rotate. If that happens the vehicle won’t start, the steering wheel won’t turn and it won’t shift into gear. On a late 90’s or early 2000 GM vehicle this is the way to get it apart so you can replace the tumbler. Loading…
How to fix a stuck ignition on a 2003 focus?
The instructions at h ttp://www.mbremerart.com/misc/Focus%20Manua/2003%20Focus%20Ignition%20Lock%20Cylinder.htm give a good idea of how to go about removing everything. First, the lower dash panel cover comes off. Undo 4 8mm bolts, and then pull gently to release the clip that fastens the left-hand side.
The lock housing assembly holds the key cylinder on the right and the starter switch on the left and also helps the steering wheel to lock when removing the key. For just under $150 I ordered the lock housing assembly (part # 9L8Z-3511-A) from the Ford dealer.
