Where can I buy a Dodge Ram engine cylinder head?

Shop AutoZone for Dodge Ram 1500 Engine Cylinder Head. 10% OFF $75. Use Code: DIYSAVE10 Online Ship-to-Home Orders Only With its top-of-the-line tow capacity and luxurious cab interior, your Dodge Ram has everything it takes to be a beast on the road.

What kind of engine does a Dodge 5.2 have?

Dodge Engine 5.2 Specs. The term “Dodge 5.2” is shorthand for 5.2-liter Dodge engines. These eight-cylinder engines have been used by Dodge—a company under the Chrysler brand—since the mid-1980s.

Can a 5.2L Dodge Ram misfire?

To be a bit more specific, the engine still starts and runs, but runs with a misfire. If the engine is misfiring, due to a compression problem and your 5.2L or 5.9L Dodge vehicle is OBD II equipped, you’ll see one or more of the following trouble codes:

What does compression mean on a Dodge Ram?

Engine threw a rod. Any compression value below 100 PSI (even if it’s not 0 PSI) means internal mechanical engine trouble. CASE 2: All cylinders have compression but their values are not the same.

What kind of pin out does a 1996 Dodge Ram have?

IMPORTANT: The pin out chart in these 3 pages apply only to the 1996 Dodge Ram pickups with a 5.2L or 5.9L V8 engine. For other PCM pin-out charts, take a look at the following: PCM Pin Out Chart (1995 V8 Dodge Ram 1500, 2500 Pickup).

What are the specs on a 1996 Dodge Ram?

Research 1996 Dodge Ram 1500 specs for the trims available. Choose the desired trim / style from the dropdown list to see the corresponding specs. Trans Description Cont. Again

What kind of engine does a Dodge Ram have?

After all, the Gen3 HEMI engine is what we are all about here and if your Dodge RAM is powered by one then we know how to get the most out of it. Dodge Ram 1500 2009-20 Catback Exhaust, 3″ system featuring 5″ dia. slash-cut conical polished tips.

What kind of exhaust system does Dodge Ram have?

Dodge Ram 1500 2009-20 Catback Exhaust, 3″ system featuring 5″ dia. slash-cut conical polished tips. Designed for the 5.7L Quad/Crew… read more Dodge Ram 1500 2009-2020 Headers. 1-7/8″ D Primaries, and 3″ slip-fit collector to 3″ lead-pipes. Complete with clamps and O2 extensions… read more

Are there any parts for the Dodge Ram 1500?

Unfortunately, the Dodge Ram 1500 is no stranger to problems. For this reason, it is important that you have a reliable source where you have access to various Dodge Ram 1500 performance parts, Dodge Ram 1500 OEM parts and Dodge Ram 1500 body parts.

What kind of engine does a Dodge Ram 1500 use?

Before the end of the generation, a magnum V-8, as well as a Cummins diesel I-6 would be introduced into the line-up, and the Slant-6 was replaced with a 3.9-liter, fuel-injected V-6 that produced 25 percent more power.

What kind of suspension does Dodge Ram 1500 have?

The Mega Cab only lasted until a few years and was replaced with the four-door crew cab in the Ram 1500’s fourth generation. This generation has a five-link rear suspension that replaced the previous leaf spring suspension system, and it received an upgraded towing capacity along with its impressive new Hemi engine option.

What kind of engine does a Dodge 4.7 have?

What is a Dodge 4.7 Engine? On the market for over 20 years, 4.7 refers to the fluid volume the system uses. Generally, you find this engine operating in a V8 system, with each cylinder featuring two valves.

When did the new Dodge engine come out?

As with any machinery that is so prevalent on the market, you can expect some company designed revisions. Starting in 2008, you can track, over time, the updates run by the motor company. These work to address some issues, though it is always best to learn to troubleshoot on your own.

Where to rebuild a Dodge 4.7 high output engine?

Engine is ready for pick up and installation. We rebuild Dodge 4.7 High Output and Non HO engines at our Los Angeles machine shop on a regular basis. Call if you need your engine rebuilt. Call if you need machine shop services, bore and hone, decking, or a valve job.

What kind of engine is a Dodge 4.7?

Dodge 4.7 287 V8 High Output engine rebuild from a 2002 Dodge Ram 1500 came in the shop for a complete remanufacture. As you can see our resident inspector came over to check it out.

When did the Dodge Ram 4.7 come out?

A V-8 4.7 Dodge engine for sale will come from Dodge Ram 1500 models from the years 2002 to 2007. High-output models also exist that have an increased amount of horsepower and torque.

Are there any remanufactured engines for Dodge cars?

For over thirty years Accurate Engines has been providing top quality remanufactured engines to warranty companies, Dodge dealerships, local auto repair shops, and directly to Dodge vehicle owners. In that time we’ve successfully provided over 35,000 rebuilt engines to satisfied customers.

What kind of transmission does a Dodge 1500 have?

The Truck used during this video is a 1995 Dodge RAM 1500 2wd Equipped with a 46RH Automatic Transmission and 5.9 L Engine also known as 360. ( 360 ci displacement) These steps also apply to Dodge RAM Trucks Equipped with a 42RH Automatic Transmission, and R and R steps for 47RH Automatic Transmission in case the Pressure Solenoid is defective.

What causes a shift problem on a Dodge Ram truck?

The trick is that only 3/4 and 1 Ton Trucks are usually equipped with such a sensor. For Dodge RAM Trucks that are not equipped with a Transmission Temperature Sensor and are experiencing problems with the shift parameters of the Automatic Transmission, the problem usually is caused by a defective Transmission Pressure Solenoid.

What’s the problem with the Dodge Ram 1500?

Dodge RAM 1500 Transmission Shifting Problem Caused by Defective Pressure/Overdrive Solenoid. – YouTube Dodge RAM 1500 Transmission Shifting Problem Caused by Defective Pressure/Overdrive Solenoid.

When to replace the cylinder head on a Dodge Ram?

Haul your loads in style without worrying about faulty parts by installing a first-class Dodge Ram cylinder head from AutoZone. When your truck isn’t giving you the emission quality you’re use to and you start seeing a large amount of white smoke billowing from the tailpipe, it’s time to replace your engine cylinder head for Dodge Ram.

How much does it cost to replace a head gasket on a Dodge Ram?

The average cost for a Dodge Ram 1500 head gasket replacement is between $779 and $924. Labor costs are estimated between $553 and $697 while parts are priced between $226 and $227.

What are the problems with a 2002 Dodge Ram 1500?

Lighting issues are common in Dodge Ram trucks and are one of the most frequently-cited 2002 Dodge Ram 1500 electrical problems specifically. Owners find that their headlights, taillights or turn signals suddenly stop working, causing irritation at best and a safety hazard at worst.

What kind of truck is the Dodge Ram?

All cars and minivans retained the Dodge nameplate, but the Dodge Ram and Dodge Dakota trucks became RAM trucks. This article focuses on the full size pickup formerly known as the Dodge Ram pickup and now known as the RAM pickup.

Where is the first cylinder on a Dodge Ram?

An important thing to understand when finding the location of cylinder one is that it’s going to be the first cylinder in the firing order of the vehicle, and not the first cylinder that you might see when looking at the engine. The P0301 Dodge trouble code will trigger the Ram’s service engine soon light.

What causes a Dodge Ram 1500 to Misfit?

Bad head gaskets, worn piston rings, bad valves and worn cylinder walls are all culprits. Damaged or broken rocker arms, broken valve springs, and worn camshaft lobes or lifters are also reasons for mechanical misfiring. Most of these failures will be accompanied by some form of internal engine noise.

What causes a Dodge Ram 1500 to stop running?

As these components begin to fail, the initial misfire will be very slight and difficult to detect. As the components deteriorate into a more advanced case of ill repair, the problem will become more noticeable. Left unattended, this can lead to complete failure, and the vehicle will cease to operate completely.

Where is the 3 rd cylinder on a Dodge Ram?

An important thing to understand when finding the location of cylinder 3 is that it’s going to be the 3’rd cylinder in the firing order of the vehicle, and not the 3’rd cylinder that you might see when looking at the engine. The P0303 trouble code will trigger the Ram’s service engine soon light.

What are the specs of a Dodge Ram 1500?

Engine Speed Three-way catalytic converters, heated oxygen sensors, electronic EGR and internal engine features (a) (b) 2WD: 14/19 – man. 2WD: 14/19 – auto. 4WD: 13/17 – man. 4WD: 14/17 – auto. (a) Meets SULEV 1 emissions requirements in CA, NY, MA, ME and VT. Meets Tier 2 Bin 10C emissions in the other states.

What kind of car is a Dodge Ram?

Consumer Ratings Rank Vehicles HP #1 2005 GMC Sierra 1500 Regular Cab 285 #2 2005 Dodge Ram 1500 Regular Cab 235 #3 2005 Ford F150 Regular Cab 231 #4 2006 Dodge Dakota Club Cab 230

What kind of cylinder head does a Dodge 5.9L have?

Cylinder Head, Stock Replacement, Assembled, Cast Iron, Natural, Dodge, 5.2L/5.9L, Magnum, Each Cylinder Head Bolts, High Performance, Hex Head, Small Block Mopar, W2, W2 Econo, Performer RPM Heads, Kit

What kind of head does a Dodge Magnum have?

This head fits many Chrysler / Dodge vehicles including the Ram, Durango, Dakota, Van and others from 1991 up. These are also known as 318 and 360’s. For other models see our store listings.

How tall is bull head aluminum truck bed?

Our Tail Board is 20″ – 25″ in height depending on the truck. Most of our competitors use a short Tail Board that is around 7″ to 14″ tall which can show underneath the truck (and spare tire on pickup trucks) Bull Head manufactures the Toughest, Best Fitting Aluminum Truck Beds on the market.

This head fits many Chrysler / Dodge vehicles including the Ram, Durango, Dakota, Van and others from 1991 up. These are also known as 318 and 360’s. For other models see our store listings.

What kind of Cam do I need for a magnum truck?

When you change the cam, you will probably need a timing chain (P/N HUG 6440). This is a good start, and it is a double roller. Look at the tensioner (P/N CLO9-5387) for a more accurate timing and extended chain life. We suggest our P/N HUGHER9703AL-114° as a first step cam for 5.2 V8 engines or 3.9 V6 engines.

Where can I get a Dodge Magnum camshaft kit?

Select your preferred location and we’ll note which parts are ready to be picked up TODAY. Camshaft and Lifter Kit; Xtreme Hi-Lift; Camshaft/Lifter Kit; Hyd Flat Tappet;RPM 2500-6500;Adv.Dur. 285 Int./

What kind of camshaft do I need for Magnum roller?

Step up from factory R/T camshaft, more power, wider power band. This cam likes the FI AirGap intake manifold and a modified OEM throttle body. Mild street, works well with stock heads,Modified OEM throttle body and headers. Works well with the FI AirGap Intake.The 5.2L/5.9L requires computer change. Good super charger camshaft.

How to install a hemi cam on a Dodge Ram?

Pull the coil packs off using a 10mm socket and set them aside and remove the valve covers by removing the 10x 8mm bolts per cover. Once these are loose the cover will just pull off, the passenger side can be a bit of a pain because of the factory wiring harness but lift it up and the cover will pull out.

Which is the best Cam for a Ram 1500?

This cam is currently in Hemifever’s 2017 Ram 1500 5.7 and has run a best of 11.46 @ 116.68MPH in the 1/4 mile with no boost or nitrous. For the 5/6 speed trucks that are planning to take your truck to the track, we do recommend 4.56 gears, a 4000 stall tq converter, and Hemifever custom tuning to see the full potential of this cam.

What kind of camshaft does Moe’s performance use?

Moe’s Performance High Performance Track (HPT) cam was designed for the daily drivers that want to use their truck everyday and still drag their friends at the track. This cam is not only going to give you tire shredding torque down low, but it also screams all the way up to 6400rpms for you racers.

How do you remove Cam from Dodge Ram?

With the cam bolt removed, carefully remove the phaser assembly, it will pull right off with the chain, just let the chain hang down onto the oil pump. With the phaser assembly removed you can now move up to the heads to remove the rocker arms.

Is the 3.7L V6 a PowerTech engine?

Like the PowerTech V8, the 3.7L V6 engine has a cast-iron cylinder block with a 90 degrees angle between cylinder banks. This angle has been maintained in order to combine and reduce the production cost of two engines. All V6 engines with a 90-degree design have a crankshaft configuration problem.

What kind of engine does a Dodge Magnum have?

The PowerTech engines were never used on any passenger car but were reserved for truck and SUV use only. The 3.7L PowerTech/Magnum engine is basically a 4.7 V8 version without two cylinders. Like the PowerTech V8, the 3.7L V6 engine has a cast-iron cylinder block with a 90 degrees angle between cylinder banks.

Are there any updates to the Dodge 3.7 engine?

With installed 100% new pressed in & pinned valve seats to stop seats from dropping and damaging engines. Updates include oil sludge issue eliminated by utilizing a newly engineered piston which brings the combustion chamber temperature back under control. Also the drain back holes are drilled out in the head and block to promote proper oiling.

What’s the warranty on a Dodge 4.7 engine?

We install a M.L.S. (multi layer steel) head gasket which stops premature head gasket failure from the high heat conditions this engine endures. Get up to a 7 Year, Million Mile (No-Fault) Warranty on parts and labor, GUARANTEED!

Is the Dodge 5.7 Hemi a guzzler?

Maybe the 5.7 hemi will be just as much of a guzzler, but hopefully it’ll have a higher power out put to show for it.

What are the most common issues with Dodge Ram Trucks?

The more common body issues on Dodge Ram trucks include: 1 Rotting of the outer wheelhouse and upper wheel arch area of the bed. 2 Rotting of both driver and passenger side cab corners. 3 Rotting of both driver and passenger side rocker panels, typically starting across the lower door weatherstrip seal. 4 Rotting of the oil pain.

Maybe the 5.7 hemi will be just as much of a guzzler, but hopefully it’ll have a higher power out put to show for it.

Where can I buy a 2002 Dodge Ram 1500?

2002 Ram 1500 listings within 50 miles of your ZIP code. Get answers to buy with confidence. Save when you purchase multiple reports. Get free quotes from dealers near you. Compare real, custom loan offers from multiple lenders in minutes!

How much does a Dodge 5.9 engine cost?

The upgraded computer that gives the 5.9 more of a performance tune is good for about 20 HP, not bad for $300 and 5 minutes work. I have a 360 in my Ram I will say the engine is awsome and I love all the power but it is definetely not a race engine.

Why do people not like the Dodge 5.9 engine?

Most people don’t know or care that it will clobber any current small block on low end torque and horsepower,below 3000 rpm. And most of these guys who are so proud of their big horsepower numbers don’t look at their tach enough to realize that 99% of their driving is below 3000 rpm.

Are there any problems with the Dodge Ram 1500?

Fourth-generation Dodge Rams are more powerful than these trucks have ever been, yet they’re still susceptible to issues that can make them dangerous to drive. Electrical issues are unfortunately common in late-model RAMs and are some of the worst 2010 RAM 1500 problems. 1. TIPM Issues

What kind of engine does a Dodge Durango have?

Click to expand… I just dropped a 2002 4.7 in my 2000 Durango and have been pulling my hair out for days. It attempts to start but acts as if the timing is advanced and has spark but not as strong as I’d like. “IF” I have the 32 tooth tone gear, can I simply get a PCM from a 2002 or later?

When to replace cylinder head bolts on Dodge Dakota?

Above is the suggested tightening sequence for the cylinder head bolts to avoid premature gasket failure. NOTE: The following torque specs apply to: 2000, 2001, 2002, and 2003 4.7L Dodge Dakota and Durango. IMPORTANT: The cylinder head bolts are ‘ torque to yield ’ bolts and should be replaced when the cylinder head gasket is replaced. 32 ozs.

What kind of cylinder head does a Dodge Ram have?

This listing is for a rebuilt Dodge 4.7 liter V-8 cylinder head (not HO). This head fits many Chrysler / Dodge vehicles including the Ram, Durango, Dakota, Van and others. For other models see our store listings.

Is there a 4.7 engine in a 2003 Durango?

Welcome to DDN. The 2003 D was the last year of the Gen 1 D’s. The 4.7 engine from ’00-’07 are alike, and the new version from ’08 and newer share little if anything. Since the newer 4.7 was not a factory option in a Gen 1 Durango, making one work there would be quite the task.

What kind of head does a 4.7L V8 have?

While the 3.7L V6 has a balancing shaft, the 4.7L engine doesn’t need it. The engine is equipped with cast aluminum alloy cylinder heads. Between each head and engine block, there is a three-layer laminated stainless steel gasket. Head bolts are 11 mm.

What was the last year of the Dodge Durango?

The 2003 D was the last year of the Gen 1 D’s. The 4.7 engine from ’00-’07 are alike, and the new version from ’08 and newer share little if anything. Since the newer 4.7 was not a factory option in a Gen 1 Durango, making one work there would be quite the task. You could swap in a 5.9 which was offered, and that would be a much easier project.

What kind of engine does a Dodge Ram 1500 have?

Under the Hood. Five engines are available in the Ram, ranging from six to 10 cylinders. A 175-horsepower 3.9-liter V-6 is the base engine for two-wheel-drive regular cabs in the 1500 series. Club Cabs, Quad Cabs and four-wheel-drive regular cabs get a standard 230-hp 5.2-liter V-8.

What kind of bed does a Dodge Ram 1500 have?

The current Ram will continue through the 2001 model year, and Dodge plans to introduce a new version for 2002. Dodges lineup includes regular-cab, Club Cab (extended-cab) and four-door Quad Cab models. The regular cab and Quad Cab are available with 6.5- or 8-foot cargo beds, and the Club Cab comes only with the 6.5-foot bed.

Where can I buy a Dodge Ram engine cylinder head?