Where are the relays in the glove box?
Where are the relays in the glove box?
Then there are 4 relays directly above the glove box. you can’t see them until you drop the panel. There are three 10mm bolts just in front of the latch. There are 4 relays, 3 that look the same and one that is different. The relay that you want is the middle one of the 3 that are the same.
What are the relays for a tail light?
1. TAIL fuse 2. TAIL relay (USA only) 3. Headlamp dimmer switch assy 4. Daytime running light relay (USA only) 5. Wire harness The tail lamp relay is relay number B, 2md from the left in the RH junction box 15. TAILLAMP RELAY (a) Measure the resistance according to the value (s) in the table below.
Where are the relays for the dash lights?
If your dash lights work but won’t dim and your running light won’t work and your license plate lights are out. Then there are 4 relays directly above the glove box. you can’t see them until you drop the panel. There are three 10mm bolts just in front of the latch. There are 4 relays, 3 that look the same and one that is different.
Where is the relay number on a wire harness?
Wire harness The tail lamp relay is relay number B, 2md from the left in the RH junction box 15. TAILLAMP RELAY (a) Measure the resistance according to the value (s) in the table below. If that is not the cause, I would check the headlight dimmer switch (sounds more like it because of your dash light being out as well Hope this helps, good luck.
Then there are 4 relays directly above the glove box. you can’t see them until you drop the panel. There are three 10mm bolts just in front of the latch. There are 4 relays, 3 that look the same and one that is different. The relay that you want is the middle one of the 3 that are the same.
1. TAIL fuse 2. TAIL relay (USA only) 3. Headlamp dimmer switch assy 4. Daytime running light relay (USA only) 5. Wire harness The tail lamp relay is relay number B, 2md from the left in the RH junction box 15. TAILLAMP RELAY (a) Measure the resistance according to the value (s) in the table below.
If your dash lights work but won’t dim and your running light won’t work and your license plate lights are out. Then there are 4 relays directly above the glove box. you can’t see them until you drop the panel. There are three 10mm bolts just in front of the latch. There are 4 relays, 3 that look the same and one that is different.
Where are the fuses for running lights located?
Step 10 – If all running or tail lights are not working, a fuse is used to protect the lighting system from overload and short circuits, anytime more than one light bulb is out, the fuse is the first place to check, these fuses are located in the power distribution center (pdc). Learn More