Where are the fuses located on a Chevy Malibu?

The engine compartment fuse block is located on the driver’s side of the vehicle, near the battery. The rear compartment fuse block is located in the trunk of the vehicle. Access the fuse block through the trunk panel on the driver’s side of the rear cargo area.

Where are the fuses located on a Fiat Punto Mk2?

Fiat Punto mk2 (Classic) (from 2004) – fuse box diagram Year of production: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 Fuse location The fuses of the car are grouped into two fuse boxes (thre for versions with Dualogic gearbox) to be found respectively on the dashboard and in the engine compartment.

When to replace a fuse on a Savana?

Look at the silver-colored band inside the fuse. If the band is broken or melted, replace the fuse. Be sure you replace a bad fuse with a new one of the identical size and rating.

Where is the fuse box located on a Chevy Malibu?

It is located on the passenger side of the vehicle, on the lower portion of the instrument panel near the floor, behind the cover. It is located in the engine compartment (left-side), under the cover. Rear Compartment Fuse Block is located in the luggage compartment (on the left-side), behind the cover.

Where is the fuse box on a Harley Davidson?

I know the fuse box is under the seat of my 03 softail heritage, but where is the main fuse I believe it’s a 40a fuse. I’ve seen video saying to turn ignition on wait for light to turn off, then remove the main fuse and then the battery can be removed.

Where is the fuse panel on 1989flhtcu?

Found them they were covered in dust after removing the dust from the top I could see the map to the fuses. It’s not on the left side unless you have to take apart one of the 2 boxes located on the left side. Where is the fuse panel on 1989FLHTCU ?

The 2010 Chevrolet Malibu has fuses in three locations: Underhood fuse box, body control module and rear fuse box locate on the left side of the trunk.

Which is the relay coil on a fuel pump?

#85 and #86 are the relay coil. It doesn’t matter which one you take to ground as long as the other you have as your triggered 12v signal. Example: – If you take #85 to ground than make #86 your 12v signal in. – If you take #86 to ground than make #85 your 12v signal in.

What kind of wiring do you need for a fuel pump?

At the wiring you need to find the 12v supply wire from the ECU to the fuel pump. Once that wire has been found cut that wire so that you now have half of that wiring running to the fuel pump, and the other half running to the factory ECU. Choosing a Relay The relayyou need should be a four-prong relay with at least 14-gauge wiring.

How does the wiring of the fuel pump affect the car?

The factory wiring of the fuel pump is tied in with many other parts of the cars electrical system. If there are any fluctuations in voltage in this system, the fuel pump will also be affected. Just think about when you have the radio turned up, or running the high beam lights, or maybe when the alternator starts to weaken.