When was the C6 transmission made?
When was the C6 transmission made?
Ford C6 Transmission Specs The C6 is arguably one of the most popular automatic transmissions Ford ever produced. Built from 1966 to 1996, the C6 was manufactured at Ford’s Livonia Transmission Plant in Livonia, Michigan until the mid 1980s when production was moved to the Sharonville Transmission Plant in Ohio.
When did the Ford C6 transmission come out?
Ford’s C6 transmission was first pressed into service for 1966. It was designed to replace a generation of heavy and outdated BorgWarner MX and FX iron-case transmissions used behind Ford big-block and Y-Block V-8s. The C6 is on a par with GM’s Turbo- Hydramatic 400 and Chrysler’s 727 Torqueflite transmissions.
Can a C-6 transmission be installed on a V-8?
Replacement crossmembers are available to help you with the installation of the C-6 into 1955-’62 full-size Ford V-8s as well. The C-6 is a good transmission choice to use for installing a 429 or 460 engine into earlier Ford models, too.
Why is my C6 transmission not working properly?
If the transmission has recently been disassembled, the problem is likely a lack of fluid or a missing valve body ball. The C6 operates on hydraulic pressure, necessitating a sufficient amount of fluid.
Where does the transmission fluid leak on a C6?
The most common source of a fluid leak on a C6 is at the transmission’s pan, located on the bottom of the transmission. Engine oil should not be mistaken for transmission fluid, with its distinctive pink color. Between the pan and the transmission is a single cork gasket.
Replacement crossmembers are available to help you with the installation of the C-6 into 1955-’62 full-size Ford V-8s as well. The C-6 is a good transmission choice to use for installing a 429 or 460 engine into earlier Ford models, too.
Ford’s C6 transmission was first produced in 1966 and was used primarily in trucks and for high-performance big block engines. The C6 consists primarily of a torque converter, a planetary gear train controlled with a band, clutches and a hydraulic control system.
If the transmission has recently been disassembled, the problem is likely a lack of fluid or a missing valve body ball. The C6 operates on hydraulic pressure, necessitating a sufficient amount of fluid.
How much torque does a C6 transmission have?
This 3 speed automatic transmission was designed to handle up to 475 lb-ft of torque, although the C6 with the aftermarket upgrades used for drag racing can handle significantly more torque. This transmission is designed with a longitudinal orientation.
