When to replace the headlight on a 2005 Chevrolet TrailBlazer?

The video above shows you to replace the headlight in your 2005 Chevrolet Trailblazer. Headlights grow dimmer by up to 20% over time and eventually burn out – for this reason, we recommend changing your headlights in pairs.

Where is the high beam bulb on a Chevy Trailblazer?

Note that the outside bulb closest to the fender is the low-beam and the inside bulb is the high beam. Unclip the wire harness from the back of the headlight bulb socket and turn the socket counterclockwise one-third of a turn to remove it from the back of the assembly.

Why do you change both headlight bulbs at the same time?

Changing both headlight bulbs on your Trailblazer at the same time will allow both bulbs to have the same intensity and prevent the new headlight bulb from appearing brighter than the bulb on the opposite side.

How do you replace a low beam headlight?

Pull both tab brackets up about 2 inches to align the hole in the tabs to the head of the lock pin and then wiggle the headlight assembly forward. Remove the black rubber cover from the headlight you’re replacing. Note that the outside bulb closest to the fender is the low-beam and the inside bulb is the high beam.

How do you turn on the high beams on a Chevrolet TrailBlazer?

Push the headlight switch forward to enable the high beams. To return to the low beams, pull the headlight switch to its neutral position. To quickly flash your high beams, pull the headlight switch as far towards you as it can go and let it go.

How do you wash a Chevrolet TrailBlazer headlamp?

Press the headlamp washer button above the headlamp switch to activate the headlamp washer system if the headlamps are dirty. Not all Chevrolet TrailBlazers are equipped with headlamp washers. Check with your owner’s manual to make sure your TrailBlazer has them equipped.

Where are the adjustment screws on a Chevy Trailblazer?

Open your hood and locate the vertical and horizontal adjustment screws. The vertical adjustment screw is located on the top of the headlight assembly. The horizontal adjustment screw is located on the side of the headlight assembly towards the center of the hood.

Which is the best Chevrolet TrailBlazer Head Light?

Whether you’re traveling in daylight or darkness, in rain, sleet, snow or fog, depend on AutoZone to have the replacement Trailblazer head light to meet your needs. We offer headlights from some of the best brands in the business, so you can bank on premium quality and long-lasting durability.

Is there an easy way to replace a headlight?

Here’s the easy way to replace… If playback doesn’t begin shortly, try restarting your device. CheapGeek, Your Jack of All Trades-Teaching you how to live life on the Cheap! Tech, DIY, Product Reviews and How To’s! CheapGeek believes that- Cheap doesn’t mean- Cheap! We’re all just trying to save costs, money, time and gain value!

Where are the retaining tabs on a Chevy Trailblazer?

Locate the two retaining tab brackets on the top rear edges of the headlight assembly. The inner tab closest to the hood latch mechanism is more visible. The outside tab is closest to the side fender but down lower between the front frame rail and backside of the headlight assembly.

Where is the headlight bulb on a Chevy Trailblazer?

The headlight bulbs on the Chevy TrailBlazer are accessed at the back of the headlight assembly. While there’s controversy about whether removing the front grill is required, doing so will help those with less than nimble fingers and lack of hand dexterity.

What to do when your head lights dont come on?

Most people dont realize this is for the headlamps. An easy way to check that is to swap it with the same type relay that is right next to it. Turn the key off, swap relays, turn key on, then turn head light switch on. It they come on, replace the bad relay.

Where are the headlamps located on a trailblazer?

The headlamps on your TrailBlazer are one of the most important aspects of your safety. Using the headlamps is simple and all headlamp features can be controlled through the headlamp switch to the left of the steering wheel. The TrailBlazer uses 9006-type bulbs for the low beams and 9005-type bulbs for the high beams.

When to use high beams or low beams on Chevrolet TrailBlazer?

Turn the knob one more click to the right. This enables the headlamps as well as the parking lamps. This setting should be used when conditions are extremely dark. Push the headlight switch forward to enable the high beams. To return to the low beams, pull the headlight switch to its neutral position.