When to replace the brake pads on a Ford F-150?
When to replace the brake pads on a Ford F-150?
Listen for an audible alert from the brake wear indicators to tell when you need to replace. At that time, inspect the other components of the braking system to catch any wear or damage that may compromise your truck’s braking performance. Park the Ford F-150 on a flat stretch of ground and apply the parking brake.
How do you put a parking brake on a Ford F-150?
Park the Ford F-150 on a flat stretch of ground and apply the parking brake. Pull the hood release lever to open the hood. Go to the engine compartment. Remove the master cylinder cap and remove half of the brake fluid in the container.
How do you change disc brake pads on a Ford truck?
Re-install the caliper on the rotor and tighten the caliper nuts properly. It’s always a good idea to have some PB Blaster lubricant handy to lubricate calipers, rotors, and bolts while you are installing the pads. Put the wheels back on and tighten the lug nuts appropriately.
How do you change the brake rotor on a Ford F-150?
Loosen front lug nuts when tires are still touching the ground, then jack tires off the ground, secure it with jack stands, and remove nuts and wheels. Using a 13mm socket wrench (for F-150) or a 17mm socket wrench (for Super Duty), unscrew the two bolts behind the caliper and take it off of the rotor.
Listen for an audible alert from the brake wear indicators to tell when you need to replace. At that time, inspect the other components of the braking system to catch any wear or damage that may compromise your truck’s braking performance. Park the Ford F-150 on a flat stretch of ground and apply the parking brake.
Park the Ford F-150 on a flat stretch of ground and apply the parking brake. Pull the hood release lever to open the hood. Go to the engine compartment. Remove the master cylinder cap and remove half of the brake fluid in the container.
Re-install the caliper on the rotor and tighten the caliper nuts properly. It’s always a good idea to have some PB Blaster lubricant handy to lubricate calipers, rotors, and bolts while you are installing the pads. Put the wheels back on and tighten the lug nuts appropriately.
Loosen front lug nuts when tires are still touching the ground, then jack tires off the ground, secure it with jack stands, and remove nuts and wheels. Using a 13mm socket wrench (for F-150) or a 17mm socket wrench (for Super Duty), unscrew the two bolts behind the caliper and take it off of the rotor.
This automotive “how-to” guide was specifically written to assist owners of the 12th generation (2009, 2010, 2011, 2012, 2013 & 2014) Ford F-150 truck in changing the rear disc brake pads.
What do you need to replace rear brake pads?
The tools needed to complete this procedure include a flathead screwdriver, a lug nut wrench, a floor jack, two jack stands, a 13mm socket with ratcheting wrench, a “C” or “F” clamp, a new set of rear brake pads and a packet of brake caliper lubricant.
How do you change brake fluid in a Ford F-150?
Move to the engine bay and twist off the brake fluid reservoir cap in the counter clockwise direction. Removing the brake fluid reservoir cap will allow the brake fluid to more easily travel backwards through the system when you compress the piston.
How does a caliper fit over a new brake pad?
In order for the brake caliper to fit over the thicker new brake pads, the caliper piston needs to be compressed backwards. Attach the “C” clamp to the caliper piston using the back of an old brake pad to evenly distribute the force. Move to the engine bay and twist off the brake fluid reservoir cap in the counter clockwise direction.
