When do you need to replace the radiator on a Dodge Ram?
When do you need to replace the radiator on a Dodge Ram?
On the ends of the radiator are plastic tanks that can crack due to impact and vibration, making replacement of the radiator mandatory. This article applies to the Dodge Ram 3rd Generation (2002-2008).
Why is my radiator leaking on my Dodge Ram?
Coolant enters and exits the radiator from the plastic end tanks on the sides of the radiator. When the wrong coolant is used or coolant is not changed in the recommended service interval, corrosion can take place inside the radiator, This can cause internal leaks and clogs.
Where is the power steering cooler on a Dodge Ram?
Remove the transmission and power steering coolers from the radiator. At the bottom of the radiator mounts the power steering cooler. It is held in place by two bolts at each end of the cooler. Access to the bolts is easier from the bottom of the truck. At the middle of the radiator on the front side is the transmission cooler.
On the ends of the radiator are plastic tanks that can crack due to impact and vibration, making replacement of the radiator mandatory. This article applies to the Dodge Ram 3rd Generation (2002-2008).
Coolant enters and exits the radiator from the plastic end tanks on the sides of the radiator. When the wrong coolant is used or coolant is not changed in the recommended service interval, corrosion can take place inside the radiator, This can cause internal leaks and clogs.
Remove the transmission and power steering coolers from the radiator. At the bottom of the radiator mounts the power steering cooler. It is held in place by two bolts at each end of the cooler. Access to the bolts is easier from the bottom of the truck. At the middle of the radiator on the front side is the transmission cooler.
How does the radiator work on a Dodge Ram?
The radiator uses aluminum fins coupled with many rows of tubing to transfer the engine coolant’s heat to the atmosphere. As the moving air passes over the tubes, heat is carried away. Coolant enters and exits the radiator from the plastic end tanks on the sides of the radiator.
How much is a Dodge Ram radiator at AutoZone?
Shop AutoZone for Dodge Ram 1500 Radiator. 10% OFF $75. Use Code: DIYSAVE10 Online Ship-to-Home Orders Only Bold, powerful and rugged, you enjoy the way your Dodge Ram drives as you haul heavy loads or explore the Great Outdoors.
What should I do if my radiator is leaking?
Take it to a radiator shop and have them clean it and leak check it. Why pay almost $600 for no benefit? Take it out, take to a local car wash, spray the hell out of it until the water comes out of the other side clear, spray the crap out of the inside of it until the water comes out clear, install back on the truck. Stock dodge replacement.
What causes coolant to bubble in the radiator?
When your engine is running, the high pressures in your combustion chamber can push exhaust gases into the cooling passages causing coolant to bubble in the radiator and pressures to get so high that coolant will actually be forced out of the coolant reservoir.
What are the problems with a 2002 Dodge Ram 1500?
Lighting issues are common in Dodge Ram trucks and are one of the most frequently-cited 2002 Dodge Ram 1500 electrical problems specifically. Owners find that their headlights, taillights or turn signals suddenly stop working, causing irritation at best and a safety hazard at worst.
Why is the coolant leaking on my Dodge Ram 1500?
Coolant Leaks Multiple coolant leaks are one of the more common 2015 RAM 1500 problems, as well as affecting model years 2009-2014. Many owners report that the leaking is strange because it’s difficult to locate even with a pressure test and that the leak only occurs when the engine is cold.
How can I tell if my Dodge Ram 1500 is overheating?
Dodge Mechanic: sprinkles08, Chrysler/Dodge/Jeep master tech replied 10 years ago Sometimes it will. This will be much easier to see on a cold engine. If you start the engine cold with the radiator cap off watch closely for any bubbles and see if you can smell exhaust coming from the radiator.
What causes a ticking sound in a Dodge Ram 1500?
A bad or failing manifold leads to decreased engine performance, and broken manifold bolts are common in Dodge Ram 1500s of all ages. The most common symptom of broken or degraded bolts is a ticking sound on cold starts, frequently heard from the passenger side of the truck.
How do you replace the heater in a Dodge Ram?
Disconnect the heater hoses from the firewall on the right side, sliding away the hose clamps. Cover the firewall openings with tape or rubber plugs. Unbolt and detach the air conditioning accumulator and its bracket using your wrench. Disconnect the air conditioning lines from the evaporator.
How do you replace AC unit in Dodge Ram?
Unscrew and remove the two mounting nuts for the heater/AC unit within the engine compartment using your wrench, then disconnect the unit’s electrical connectors and vacuum hoses from inside the truck. Remove the nuts and bolt from the interior and remove the heating/AC unit.
What kind of radiator does a Dodge Ram 3500 use?
Mishimoto MMRAD-RAM-94 Performance Aluminum Radiator Compatible With Dodge Ram Cummins 5.9L 1994-2002 CoolingSky 3 Row Full Aluminum Radiator for Dodge Ram 2500 / Ram 3500, Quad Cab 5.9L Diesel Engine 1994-2002 . . . . Amazon Business: Make the most of your Amazon Business account with exclusive tools and savings.
What’s the name of the new Dodge Ram 1500?
The third gen Ram 1500 underwent a major overhaul compared to its predecessor, completely upgrading the frame, suspension, powertrain, interior, and even the sheet metal.
What kind of engine does a Dodge Ram 1500 have?
In addition to the normal Ram 1500, dodge also release the Dodge Ram SRT/10 that was produced from 2004-2006. The SRT/10 Ram borrowed the Dodge Viper’s 8.3L 10-cylinder engine that put down a staggering 510 HP and 535 TQ.
What kind of antifreeze to use on radiator?
Since the 4.7L engine has the thermostat on the bottom radiator hose, remember to fill the top hose with new HOAT antifreeze and then attach that hose and fill the radiator plus reservoir to between hot and cold marks. I couldn’t find the Mopar HOAT antifreeze locally, so I used the Zerex G05 antifreeze.