What was the displacement of a 1987 Chevy 454?

Displacement The 1987 Chevy 454 engine displaces 454 cubic inches, or 7.4 liters. In 1987, the 454 had a bore of 4.25 inches, and a stroke of 4.00 inches. The 454 V8 engine in 1987 produced 230 horsepower and 385 ft.-lbs. of torque. The engine block on a 1987 454 engine can be identified by its casting number, 1401544.

When did Chevy start using the 454 engine?

The LE8 454 was the most common from 1973 to 1991. The L19 TBI, or throttle body injection, powered 1987 and later trucks as the second 454 engine option. The TBI 454 had fuel injectors in the middle of the throttle body that increased fuel efficiency, power and durability. Chevy began installing 454 V-8s in its trucks in 1973.

What kind of engine is in a 1987 Chevy Suburban?

The most common Chevy big block is the 454 cubic inch displacement engine. This engine was used in cars until 1974, after which time it was placed exclusively in Chevy trucks, such as the Suburban and the C10, until the late 1990s. The 1987 Chevy 454 engine displaces 454 cubic inches, or 7.4 liters.

How big is the spark plug on a 1987 Chevy 454?

The oil-pump-cover-to-oil-pump bolts screw to 6.67 ft.-lbs., while the spark plugs join to the cylinder head with 15 ft.-lbs. of torque. To prevent leaks, the oil pan drain plug should receive 20 ft.-lbs. of torque.

Is the Chevy 454 LE8 still in use?

The LE8 version still served GM trucks through 1991, although its horsepower rating varied from a low rating of 215 horsepower in 1974 up to about 230 in 1991. The standard transmission matching the LE8 454 on 1973 to 1987 trucks was the four-speed Muncie manual.

Which is 454 engines were in Chevy one-tons?

The 1973 1-ton trucks were equipped with a 240-horsepower 454 generating 355 foot-pounds of torque. In 1977, General Motors offered special trailering packages for its Chevys and GMC trucks, including the 1-tons. These 454s with four-barrel carburetors developed 230 horsepower and 360 foot-pounds of torque.

What kind of truck is a 1987 Chevy Silverado?

1987 Chevrolet R10 Silverado RWD This gorgeous southern truck has all the bells and whist 1986 CHEVROLET SILVERADO 4X4 LONG BED, NEW GM CRATE 5.7, NEW TRANSMISSION, DUAL TANKS, FACTORY AC 1987 Chevrolet Silverado K10 Stepside While relatively straight-lined and boxy in appeara …

What’s the price of a 1987 Chevy pickup?

This 1987 Chevrolet K10 4×4 pickup embodies that philosophy perfectly, offering an ultra-straight body, nice bright red paint, and I am selling a 1987 Chevrolet R20 pickup truck for $1,750.00 OBO. It is a great, reliable truck given its age.

Where can I buy a 1987 Chevy 4×4?

My name is MIKE. Up for sale is a beautiful 1987 4×4 short box Chevy truck (GMC Trim). This truck is in amazing shape. Let me start out by telling you where the truck has been. It was previously owned by the owner of Appleway Chevrolet of Spokane, WA. ALL work was done professionally at the dealer.

What kind of engine does a 1987 Chevy truck have?

Show Stopper 1987 Chevrolet Custom Pickup::: Powered by 350 V8 Engine, Paired with Automatic Transmission, Stunning Purple & Orange Exterior, White Leather Interior, Custom Hood, Aluminum Wheels, P… More Info › This is a Simply Gorgeous Square Body Pickup!

What kind of engine does a Chevy dually 454 have?

West Coast Classics are proud to present an exceptional Pro Street example of this 1969 Chevrolet C10 Full Size 1 Ton Stepside Short Bed Custom Dually Pick Up with a built Big Block 454 c.i. ‘CE’ code engine which is obviously ridiculously 1975 Chevrolet Silverado C-30 Ramp Truck/Car Hauler. 454 cu. in. gas engine, V-8, automatic.

Is there a 1997 Silverado dually 454 for sale?

1997 Chevrolet C/K 3500 Silverado Dually 454 V8 Gasser Classic 1997 Chevy C/K 3500 Dually Gasser with big 454 (7.4L) V8 Vortec. Good CARFAX with three Texas owners and no accidents. Affordable classic ready to haul, hunt and play! Got this clean 4 door Dually for sale. Has air ride suspension. The engine is a big block 454.

When did the Chevy 454 engine come out?

by Anne Davis. Chevrolet began producing its big block engine series in the 1950s and 1960s. The most common Chevy big block is the 454 cubic inch displacement engine. This engine was used in cars until 1974, after which time it was placed exclusively in Chevy trucks, such as the Suburban and the C10, until the late 1990s.

What kind of engine does a 1987 Mallard 454 have?

I recently bought a 1987 Mallard motorhome with a 454 engine. The fluids are good and check out good. I put new spark plugs and spark plug wires on, new rotor and cap, new intake, air and fuel filter. My question is, when I first started I drove for about 5 hours and at 65 miles per hour and and all of a sudden it slows to 40 miles per hour.

What kind of engine was the 1987 Chevy Allegro?

I had an ’87 Allegro on a Chevy P 32 chassis for 14 yrs. The spark plug wires have to be dressed a certain way. Very important! There are also heat shields on each individual plug. On my ’87 Allegro there was a ceramic fuel filter at the Rochester carb where the fuel line enters.

Where are the fuel filters in a 1987 Chevy 454?

There are fuel filters in the Carberator ( 454 =s a large guadrajet) at the front of the carb. and an inline filter, generally located just forward of the rear axle. If your coach is like my old 87, it may have two fuel filters in the very last pod area on the curb side.

What kind of engine does a Chevy 454 have?

The Chevy 454 first hit the market in the 1970s. The 454 is a big-block carbureted engine found in most older model Chevrolet cars and trucks. The engine uses eight cylinders to provide high-end torque and speeds. The combination of larger bore and eight cylinders equates to very poor gas mileage.

How tall is a Chevy 454 crate engine?

Engine Assembly, Crate Engine, Chevy, 454 HO, 438 hp, Cast Iron Rectangle Port Heads, Each Crate Engine, Long Block, Chevy 454 Stroker, SBC Crate Motor, New Block and Cylinder Heads, Roller Cam, 563HP Crate Engine, Dressed Longblock, Big Block Chevy, 540ci Stroker, BBC Crate Motor, Standard Deck Height, 670HP

What is the casting number on a Chevy 454?

The cylinder heads feature a casting number of either 14096188 or 14097088. These casting numbers are important if you are purchasing a used 454 engine, as they will allow you to identify that the correct components are installed.

When did the Chevy 454 RV engine come out?

Manufactured by Chevrolet, the 454-cubic-inch big-block V-8 is a workhorse used in a multitude of applications. The reliability and high torque made it an ideal choice for everything from light duty trucks, to SUVs and motorhomes. In its current displacement capacity, the engine debuted in 1970.

How many miles does a 1989 Toyota motorhome have?

STOVE,MICROWAVE,NEW ROOF A/C WITH HEAT STRIP.HOT WATER HEATER,NEW REFRIGERATOR,NEW MICHILIN TIRES,FURNANCE,ELECTRIC TOILET. 77000 ORIGINAL MILES .ALWAYS GARAGED. DODGE CHASSIS. 1989 Toyota Motorhome RV Camper 21ft Low Miles. V6 Auto overdrive Must See!!

What did a Class C RV look like in 1989?

Camper as been gutted to a shell inside, windows removed and re-chalked. Camper was refurbished threw-out the entire vehicle including walls, ceiling etc. Got rid of the 80’s/90’s nasty look and replaced with a custom one off look. While I had it all torn apart, we replaced wiring (where needed), new custom cabinets and tons storage threw-out.

How many AC units does a 1989 motorhome have?

Sleeps 2, has 2 AC units. 500 W Solar Array with adjustable panels. 30 Amp Go Power control module and much more

What was the bore and stroke of a 454 engine?

In 1987, the 454 had a bore of 4.25 inches, and a stroke of 4.00 inches. When discussing an internal combustion engine, bore refers to the diameter of the engine’s cylinders, which house a moving ring-and-piston assembly, and stroke refers to the distance that the pistons inside the cylinders move from top to bottom.

What kind of torque does a Chevy 454 have?

Torque Specifications. In the 1987 Chevy 454, the bolts joining the crankshaft to the engine block require 95 ft.-lbs. of torque. The cylinder head bolts require 80 ft.-lbs. of torque to join to the engine block, and the oil pan bolts to the engine block with 25 ft.-lbs. of torque.

Is the Chevy P30 chassis J71 park brake failure?

This means that we, along with many others with the Chevy P30 chassis with the J71, have experienced the sudden, and scary, engagement of the park brake while driving—the dreaded Chevy P30 park brake failure.

What does the auto park brake unit do?

This essentially locks the transmission in place and keeps the vehicle parked in place. The auto park brake unit contains an hydraulic pump and double-acting hydraulic cylinder.

Why do rear drum brakes use a proportioning valve?

Because drum brakes lock up more easily than disc brakes, vehicles with rear drums use a proportioning valve to moderate the pressure to them. Adjustable proportioning valves let you tune that cut-off pressure. Confused by classic brake components? Let the automotive experts at Summit Racing put a stop to that!

How are distribution blocks used in drum brakes?

Drum brake vehicles use a distribution block to turn your pedal press into brake line pressure at all four wheels. Metering blocks balance out the activation of the rear drum brakes and front disc brakes, preventing nose-dive.

What was the displacement of a 1987 Chevy 454?