Easy lifehacks

What size is a gutter board?

What size is a gutter board?

Standard gutter size for residential homes is five or six inches. At the backside of a 5 inch gutter, the fascia board mounting area will be four inches tall. On a six inch gutter, the mounting area is 5 inches.

What size wood is used for fascia board?

You construct fascia boards out of 1-by lumber. The width depends on the width of the rafters, but since builders generally use two-by-six or two-by-eight lumber for roof construction, the most common dimensions for fascia boards are one-by-six and one-by-eight.

What is the wood that gutters attach to called?

FASCIA BOARD
WHAT IS FASCIA BOARD? Fascia Boards (pronounced “face-sha”) are the white trim boards installed to the roofing eave of your home. Your homes gutters are mounted to this board. Their main purpose is to cover and protect the exposed rafters and prevent water from going inside your walls.

How do I know my fascia size?

Multiply the 1-1/2 inch width of the fascia board by the slope of the roof (e.g. 4/12). 1.5” times 4 divided by 12 = 0.5 or ½ inch. For a 2×6 fascia board at a 4/12 slope, the trim size would be 1-1/2 inch x 5 inches for an overhang without a soffit.

What is the standard size of fascia board?

Fascia Board Sizes Fascias are typically made from 1-inch material, with the width being enough to cover the rafter width. Typically rafters will range from 2×6 to 2×8, although some are larger depending on the roof construction. Therefore, the more common fascia board sizes are 1×6 or 1×8.

What is the best material for fascia boards?

Typically for fascia boards, cedar and redwood are popular choices given their resistance to rot from excessive moisture. However, if you prime and paint the fascia, then fir, spruce, and pine can also make beautiful choices from a design standpoint.

What is the standard width of fascia board?

Fascias are typically made from 1-inch material, with the width being enough to cover the rafter width. Typically rafters will range from 2×6 to 2×8, although some are larger depending on the roof construction. Therefore, the more common fascia board sizes are 1×6 or 1×8.

Should I use treated lumber for fascia board?

Purchase pressure-treated lumber to replace your fascia boards as a way to extend the life of the repair. Pressure-treated lumber is designed for outside applications and resists rot, moisture and insect damage. Cut the new lumber to size and secure it to the rafter ends with galvanized finish nails.

When should fascia boards be replaced?

How Do I Know When To Replace My Fascia and Soffits?

  • Soft patches in wood, which means rot or holes are appearing.
  • Crackled, flaking paint, which is a general sign of age.
  • Evidence of animals and rodents; mice, rats and squirrels can take up home in the smallest of openings and be a sign your roofline is deteriorating.

What board do you use for fascia?

Many different types of wood are suitable for fascia boards. Spruce, pine and fir are all popular and relatively inexpensive options. However, some roofers prefer to use cedar, cypress or redwood for fascia boards. While they are more expensive, these woods better resist moisture, even when left unsealed.

What length are fascia boards?

Sizes vary in depth to suit the particular pitch of the roof – most fascias are between 150mm and 225mm deep but our stock range includes both larger and smaller sizes.

What’s the average size of a gutter board?

There are three sizes however, that are most common for gutters. Sizes can vary based on the architect design of the home, the budget of the builder, or personal preference. There is no true rhyme or reason as to why certain sizes are chosen. This boards nominal size is five and a half by three quarters.

How tall should the fascia board be on a 5 inch gutter?

At the backside of a 5 inch gutter, the fascia board mounting area will be four inches tall. On a six inch gutter, the mounting area is 5 inches. This leaves a little bit of additional space below the gutter. If the gutter is dropped for change the pitch, you may see a little bit less fascia board beneath the gutter.

What are three units of measure for lumber?

THREE BASIC UNITS OF MEASURE ARE USED FOR LUMBER: . 1. BOARD MEASURE- is the term to indicate that the board foot is the unit of measurement for most lumber items. A board foot is defined as a piece one inch thick (nominal) by one foot wide (nominal) by one foot long (actual) or its equivalent. For instance a 2 x 6 also equals one board foot

How to calculate how many feet of lumber you need?

You can measure board feet by multiplying length x width x thickness in inches, and then dividing by 144. If ordering a large amount by board feet, just multiply the total board feet needed by the price per board foot for the total cost. How to Use Linear Feet: A linear foot describes a 12-inch long piece of lumber.

Author Image
Ruth Doyle