What should the torque be on a 3406E?
What should the torque be on a 3406E?
Turn the slave piston adjusting screw in a clockwise direction until the slave piston tightens against the feeler gauge. A slight drag should be felt on the feeler gauge. Tighten the adjustment locknut (1) to a torque of 35 N·m (25 lb ft). Recheck the adjustment after you tighten the locknut.
How to adjust the exhaust valve on a 3406E?
Make an adjustment to the valve lash on the exhaust valves for cylinders 1, 3, and 5. Loosen the valve adjustment locknut (1) . Place the appropriate feeler gauge (5) between the exhaust rocker arm and the exhaust valve bridge. Turn the exhaust adjustment screw (2) while the valve adjustment locknut (1) is being held from turning.
What should the torque be on an injector?
Tighten to a torque of 30 ± 7 N·m (22 ± 5 lb ft). Recheck each adjustment. Remove the top center bolt, and turn the flywheel by 360 degrees in the direction of the engine’s rotation. This will position the No. 6 piston at the top center on the compression stroke.
When to remove injector in Caterpillar 3406 cat engine?
Much of this maintenance requiring specific applications of torque, such as removing the injector, should occur at 100,000 miles or 2,000 service hours. The Caterpillar engines’ classifications are 3406, 3406B, 3406C or 3406E. Each engine has a unique purpose and unique maintenance requirements.
Tighten to a torque of 30 ± 7 N·m (22 ± 5 lb ft). Recheck each adjustment. Make an adjustment to the valve lash on the exhaust valves for cylinders 1, 3, and 5. Loosen the valve adjustment locknut (1) . Place the appropriate feeler gauge (5) between the exhaust rocker arm and the exhaust valve bridge.
What are the slave piston Lash settings on a 3406E?
Adjust the slave piston lash settings for cylinders 3 and 5 prior to rotating the engine. After you adjust cylinders 1, 3, and 5, reset the timing pin and turn the flywheel for 360 degrees in the direction of the engine’s rotation. This will position the No. 6 piston at the top center on the compression stroke.
What do you need to know about Rockerbox?
Rockerbox ingests and organizes all historical customer order data, giving you the true lifetime value for long-term customers. We’ve seen direct mail be a high-performing channel for us.
Tighten to a torque of 30 ± 7 N·m (22 ± 5 lb ft). Recheck each adjustment. Make an adjustment to the valve lash on the exhaust valves for cylinders 1, 3, and 5. Loosen the valve adjustment locknut (1) . Place the appropriate feeler gauge (5) between the exhaust rocker arm and the exhaust valve bridge.
What kind of torque does a C-15 Jake have?
Doing an in-frame overhaul on a C-15 in an ’04 Pete 378. Looking for proper torque specs for torquing the jake assemblies, as well as torque for the studs going into the head as I have a new re-man head.
What are the dimensions of a cat 3406?
CAT 3406 Dimensions approx: length = 1535 mm, 60.4 in width = 954 mm, 37.5 in height = 1178 mm, 46.4 in Click for CAT 3406 engine manuals and specs. CAT 3406 Weight approx: 1586 Kg, 3489 lb Click for CAT 3406 engine manuals and specs.
What kind of brake do I need for a 3406 engine?
The P-36 Engine Brake is designed for 3406 applications. Examine the valve cover. An identification tag is attached to the valve cover showing all the necessary information. NOTE 1: Early 3406 Engines prior to Ser.# 92U17820 require special fuel lines and may require a special turbo to manifold crossover pipe if equipped with a low mount turbo.
