What kind of truck was the 1993 GMC TopKick?

, 1993 GMC Topkick, Bucket Boom Truck Truck, Diesel, 33000 GVW, , Fifth Wheel, Front Wheels, Rear Wheels, 1993 GMC Topkick Bucket Truck, CAT 3126, Aut… You might like these other GMC Trucks.

How old is the GMC TopKick crewcab truck?

1991 GMC Top Kick This truck was fleet maintained and has right at 18,000 miles on new cat 3116 motor backed by Allison trans.The truck runs and drive… This is a GMC 4500 Diesel Topkick Crewcab in excellent condition.

What kind of engine does a GMC TopKick have?

Caterpillar C7 Diesel engine and Allison 6 speed automatic t… Our number is 480 833 2200. We provide finance and shipping options. We take trade-ins and usually have around 30 used commercial work trucks for

, 1993 GMC Topkick, Bucket Boom Truck Truck, Diesel, 33000 GVW, , Fifth Wheel, Front Wheels, Rear Wheels, 1993 GMC Topkick Bucket Truck, CAT 3126, Aut… You might like these other GMC Trucks.

When did GMC End production of the TopKick?

After struggling to enter joint ventures or sell the rights to its product line, the company ended production of the Kodiak and TopKick in 2009. The final medium-duty truck, a GMC TopKick 5500, rolled out of Flint Truck Assembly on July 31, 2009.

What’s the life span of a GMC TopKick?

Unlike other oversized pickup trucks, the GMC Topkick had a pretty long life span. The vehicle is basically a rebadged version of the Chevrolet Kodiak and was sold until 2009.

Can a GMC C5500 TopKick be replaced?

So, if you want to keep your automobile to look good as new, then your option when it comes to replacement components is the GMC C5500 Topkick. From a vent shade to block the sunlight to a new oxygen sensor, you’ll surely get more than the best of both worlds with this.

What kind of engine does a GMC C5500 have?

8. 1 V8 Gas (No Diesel Problems) Allison Automatic 20000 lb GVW Air Conditioning 3 Passenger Seating 40 Gallon Fuel Tank Crysteel 14′ box 42″ sides Rear Barn Doors New Crysteel Electri… See More Details 2005 GMC C5500, 8.0 gas, automatic, 171,603 miles, clean truck, 13 ft tread plate flatbed, electric/ hydraulic hoist, rear receiver hitch,

Is there a GMC C5500 bucket truck for sale?

GMC C5500 bucket truck. Diesel Fueled, 114873 miles. Truck is ready to be put to work. Call for more details! 41,191 original miles, Cat Diesel, air brakes, 6 speed trans. Body excellent shape no rust 18yrd dump box. Duel wall Dump box at cab. Good rubber, 26,000 GVW. Missing tooth on 5th. Gear, needs pai… See More Details 8.1 L ENGINE GASOLINE.

Is there a 2000 GMC TopKick 5500 tire truck?

2000 Topkick 5500 tire truck with a 3126 Cat engine. This truck is really nice, has like new virgin rubber, burns no oil and runs out perfectly. It has a crane and a lift gate on the rear. The crane also has down pressure for breaking the bead even on heavy ply log skidder tires. This truck has b…

What kind of engine does a 1998 GMC TopKick have?

1998 Gmc c7500 Cat 3126 engine 6 speed manual trans 2000 gal water tank Pto driven water pump 29,000 miles. Runs great no issues. Truck is in great condition and comes with an 11ft plow, Truck Cab was repainted in 2007 and the Dump body was replaced in 2007 by Monroe Truck.

Why is my GMC Topkick truck for sale?

Truck runs and drives good, the customer drove the truck into the lot from about 25 miles away. They are selling the truck because they dont use it any more. Truck is showing 367000 miles, We’re sorry, we could not issue pre-approval based on the information provided.

Do You need A C DL to drive a GMC TopKick?

NON-C DL NO SPECIAL LICENSE REQUIRED LOW MILES WITH ONAN GENERATOR MULTIPLE USES READY FOR WORK ONE OF SEVERAL IN STOCK TO CHOOSE FROM FINANCING AVAILABLE WE SHIP NATIONWIDE AND WORLDWIDE

How tall is a 366t / 427t industrial engine?

The factory pump for a tall deck industrial engine (366T/427T or 366 cubic inch tall deck/427 cubic inch tall deck) is approximately 6-3/8″ from block to pulley mount surface. Long nose is approximately 7-5/8″ from block to pulley mount surface. Short nose is 5-7/8″ from block to pulley mount surface.

What are the gaskets on a 1972 366t engine?

As can be seen below, this set of factory heads off of a 1972 366T engine is a standard oval port casting. Visual indication of standard head use: as can be seen below, the head gaskets on this factory 366 cubic inch engine used standard size gaskets.

How many horsepower does a GMC 366 engine have?

The GMC 366 engine produces 366 horsepower at 5,500 rpm and 380 ft-lbs of torque at 4,300 rpm. No turbocharger or supercharger was offered with this type of engine. The 366 engine was produced by General Motors from the 1960s to the mid 1990s. This engine was used for medium duty trucks and school buses.

Is the 366 cylinder bore smaller than the gasket?

Tall deck engines are no less likely to incur headgasket failure due to this spacing than a standard engine. In the photo can be seen how much smaller the 366 cylinder bore is than the gasket which sits on it (and yes, this is the first disassembly of a factory engine).

What kind of engine does a GMC TopKick dump truck have?

1992 GMC TOPKICK SINGLE AXLE DUAL WHEEL DUMP TRUCK GAS, 5 SPD MANUAL TRANS, HI-LOW RANGE, AIR BRAKES, 10′ STEEL GODWIN BODY, PINTLE HOOK W/ TRAILER AIR, SNOW PLOW HOOK UP W/ CONTROLS, VERY NICE!… See More Details

How tall is a 1990 GMC dump truck?

1990 GMC Topkick dump truck, single axle, Cat 3316 Diesel engine, 6 speed transmission, Godwin Manufacturing 300U dump bed, SN. GM38224B, 10′ long, 8′ Wide, 30″ tall with 12″ side boards, GVWR 34,7…