What kind of transmission did a 1963 Muncie have?
What kind of transmission did a 1963 Muncie have?
The Muncie transmission was an aluminum main case/extension housing, side-loaded transmission with a side-lever shift linkage. The 1963 transmission had a smaller front input shaft bearing and a specific front bearing retainer with a smaller outside diameter than the Muncie transmissions from 1964 and up.
What kind of engine did Chevy Corvette have in 1964?
The 1964 Chevy Corvette Dashboard. The Muncie 4-speed manual transmission, sold under production option M20, was installed in more than 85 percent of all Corvettes that year. Of these, 10,538 were mated to wide ratio, 250hp and 300hp engines, while the other 8,496 were mated to 365hp and 375hp engines.
What was the 4 speed Muncie corvette in 1966?
In 1966–1967, two more Muncie 4-speeds were avail- able: the M21 close-ratio and M22 close- ratio, heavy-duty units. The M22 was a heavy-duty version of the M21 with gear sets that were cut on a different helix (gear) angle to lessen the thrust load on the main and input shaft.
What kind of transmission does a 1965 Corvette have?
This same ECR states that the M22 is to be used with Corvette options RPO L76, L84, and L78 for 1965. This transmission was also released for the 1965 passenger car with the L78 engine. One thing that must be kept in mind here is that this document does not prove that any M22 transmissions made it to production vehicles.
The Muncie transmission was an aluminum main case/extension housing, side-loaded transmission with a side-lever shift linkage. The 1963 transmission had a smaller front input shaft bearing and a specific front bearing retainer with a smaller outside diameter than the Muncie transmissions from 1964 and up.
What kind of transmission did corvettes have in 1964?
While the 1964 Corvette actually came standardly equipped with a 3-speed manual transmission, only 3.2 percent of the Corvettes built that year came so equipped. Once again, the optional Powerglide 2-speed automatic transmission was also offered in 1964, but only accounted for approximately 11 percent of all the Corvettes built.
In 1966–1967, two more Muncie 4-speeds were avail- able: the M21 close-ratio and M22 close- ratio, heavy-duty units. The M22 was a heavy-duty version of the M21 with gear sets that were cut on a different helix (gear) angle to lessen the thrust load on the main and input shaft.
What was the casting number for a 1964 Muncie?
The 1964 maincase casting number was #3851325 and was used through the 1965 model year as well. No 1963 or 1964 maincase should have a drain plug in the case. This practice did not start until the first M22 transmissions were built in 1965.
