What kind of engine does a Komatsu wheel loader use?
What kind of engine does a Komatsu wheel loader use?
High Performance komatsu SSDA16V160E-2 Engine Economical Komatsu SSDA16V160E-2 diesel engine provides power with reserve margins to move giant 20.0 m3 26.2 yd3loads. Equipped with an electronic governor for low fuel consumption and electronic acceleration pedal and rpm set for easy operation. Net power: 1316 kW 1765 HP
What kind of fuel prefilter does a wa320 Komatsu use?
Fuel prefilter with water separator Hydraulic-driven fan with reverse rotation Lift cylinders and bucket cylinder Loader linkage with standard lift arm Main monitor panel with EMMS (Equipment Management Monitoring System) PPC fingertip control, mono lever
Which is the largest bucket in a Komatsu loader?
The WA1200-6 is equipped with the largest bucket in its class at 20.0 m326.2 yd3. Komatsu’s bucket is designed for easy loading with little spillage.This, combined with the highest traction and breakout force available, makes a loader which achieves high bucket fill factors and maximum production, able to outproduce other loaders. Bucket capacities
What kind of engine is a Komatsu Dresser 610T?
‘COMMSU Rugged Construction — is by a four plate loader tower and solid plate lift arms. Specifications Engine The Komatsu Dresser 610T is a 4-stroke, water-cooled, overhead valve, direct-injection turbo diesel engine. It includes six cylinders with a 4″ 102 mm bore x 4.7″120 mm stroke and a 359 cu. in. 5.9 ltr. piston displacement.
While it was common for the Komatsu engines to run so long they broke before wearing out, I’ve seen far too many Cummins put out more smoke from the breather than the stack. This is particularly true for the small bore “B”, “C” and “L/M” series Cummins used in excavators and wheel loaders.
Is there a service manual for a Komatsu?
All the Komatsu machines are very complicated but they used to have decent service manuals. You better be good a reading electrical and hydraulic schematics before you ever get one. Good Luck!
How often do Komatsu motor undercarriages wear out?
There is no resale value to them so you either rebuild enough to keep running or try and trade them in on another machine. You will probably go through at least three undercarriages in 10,000 hours. I’ve only seen a couple of Komatsu motors ever wear out.
Are there any Komatsu dozers that perform well?
Cat was there if you needed them but they seemed to prefer the large contractors. We have traded several times over the years and currently have four Komatsu dozers and two excavators that perform well. The biggest factor in reliability is more about equipment maintenance and up keep .
What kind of lubricant to use on a Komatsu Dozer?
Midlands Lubricant suitable Komatsu Bulldozer Oils include 15w/40 E7 or E9, 10w/30 Low Saps Engine Oil – 10w Hydraulic Oil, CAT 10w Hydraulic Oil, 10w/30 Hydraulic Oil – 80w/90 GL4 or GL5 Gear Oils – Transmission Fluid – Steering Fluid and Komatsu Suitable Bulldozer Brake Fluid – Antifreeze Blue Concentrate orRed OAT 5 Year Antifreeze Coolant
How to find the manual for Komatsu hydraulic fluid?
Good luck on finding the manual. You could try calling your local Komatsu dealer. We are having similar troubles here in France; almost no-one stocks 10w monograde diesel engine oil. We specially ordered a drum and have had a serious leak and run out. Had to put 46 hydraulic oil in (lost that too as hose keeps blowing – that’s another story).
What kind of lubricants do Mitsubishi diesel engines use?
• Komatsu KES 07.851.1 • JASO DH-1 • ACEA E3 • MB228.3 Type performance • API CH-4 (soot thickening & valve train wear performance) • Sulphated Ash: 1.7% – preferred ash level for Mitsubishi diesel engines • 5 ltr – 3352157 • 20 ltr – 3342449 • 205 ltr – 3342450 • 1000 ltr – 3353455 Powertrain Oil TO30 Powertrain Oil TO10
What kind of lubricant is gear oil 85w-140?
Gear Oil 85W-140 A high viscosity, extreme pressure hypoid gear lubricant formulated for use in heavy duty gearboxes, final drives and differentials of earthmoving and excavating equipment and trucks, particularly those operating under high ambient temperatures.
While it was common for the Komatsu engines to run so long they broke before wearing out, I’ve seen far too many Cummins put out more smoke from the breather than the stack. This is particularly true for the small bore “B”, “C” and “L/M” series Cummins used in excavators and wheel loaders.
Are there any problems with Komatsu heavy equipment?
Komatsu to their credit did put all the electronics diagnostics on board and with some time spent deciphering the service manual a decent mechanic with some experience with computers can figure it out. The hydraulics though are extremely complicated and trouble shooting a valve or pump problem has given even highly experienced mechanics fits.
Are there any Cummins engines made by Komatsu?
As far as the Komatsu/Cummins engine issue goes I think Komatsu made a big mistake in using the Cummins product in their machinery. The Komatsu engineered and built engines are gold. The licensed Cummins products are a scab on the product line.
How many hours does a Komatsu Dozer run?
The dozers would run 10 – 12,000 OK with great maintenance and then they were completely worn out. There is no resale value to them so you either rebuild enough to keep running or try and trade them in on another machine. You will probably go through at least three undercarriages in 10,000 hours.
