What kind of engine does a Chevy C50 have?

What kind of engine does a Chevy C50 have?

Chevy’s tandem models were available in two basic types – Chevy C50 trailing axle tandems with GVW ratings to 30,000 lbs., and Chevy C60 dual-drive tandems with GVW ratings to 45,000 lbs. Chevy C50 tandems were available in three wheelbases with a choice of three gasoline engines – 292 Six, 327 V8 and 366 V8.

What was the weight of a Chevy C60 in 1968?

Tandem rear axle assemblies with ratings of 30,000 or 34,000 lbs. with vacuum-hydraulic or full-air brakes. In 1968, a new 427 cubic inch V8 engine and 23,000 lbs rear axle options for Chevy C60 permitted GCW ratings to 60,000 lbs. The model range got only slight changes in 1969, 1970, 1971, 1972 and 1973.

What was the size of a Chevrolet truck in 1967?

In 1967, Chevrolet presented all-new generation of medium and high duty truck lines. These trucks received a new 96″ BBC cabs with the design in a style of light-duty models. The compact design of these new short-conventionals allowed the same cab-to-axle dimensions as those of last year’s models with wheelbases that were 8 inches shorter.

What causes the brake lines to bleed on a Chevy?

Bleed the brake lines as recommended by Chevy to fix this. You could also have a ballooning brake hose when the brakes are applied. Check your brake hoses for anomalies. Excessive Brake Travel: If the brake linings are worn, the drum brakes are misadjusted or the brake lines have air in them, you will have this issue.

How do you know if your Chevy has a brake problem?

You will find the booster between the master cylinder and the firewall in your engine compartment. A check valve that is faulty can also let vacuum bleed out. You can diagnose this by starting your Chevy in order to build vacuum, and then turning it off for four or five minutes. Then you should try the brakes.

What causes a soft brake pedal on a Chevy?

Soft or Spongy Brake Pedal: Too much air in the system due to improper bleeding is usually the cause of this problem. However, it can also be due to fluid loss or a low fluid level. Bleed the brake lines as recommended by Chevy to fix this. You could also have a ballooning brake hose when the brakes are applied.

What can I do about my Chevy brake noise?

You should put new pads on your Chevy and replace or repair the rotors. You could add shims, use a brake noise aerosol, or brake grease to the backs of the pads to dampen the noise. Brake Chatter: Warped or improperly finished rotors will cause this noise.