What kind of conversion kit do I need for 1966 Mustang?

What kind of conversion kit do I need for 1966 Mustang?

If you use a drum brake spindle then you will need a disc brake conversion kit, if you use a disc spindle you can just use stock parts. The 69-73 spindles are the same for disc and drum brakes. I used the 67 spindles on my 66.

Can a 6 cylinder Mustang be converted to a V8?

But whatever spindle you use DO NOT use the original 6 cyl. spindle. IT WILL BREAK, they would often break with the weigh of the 6 cyl. if you put a V8 in it there is no way it will support the weight. I’m just a rookie myself, but I’ve seen this thread started at least once every other week.

What are the spindles on a 1966 Mustang?

The 69-73 spindles are the same for disc and drum brakes. I used the 67 spindles on my 66. But whatever spindle you use DO NOT use the original 6 cyl. spindle.

How much does it cost to swap a 1966 Mustang?

I did this swap on my 66 mustang. You to replace front-end suspension, brakes, steering. Also rear-end and springs. Also engine mounts and radiator. I found a wreaked 65 ranchero that the frame was bent and picked it up for $1000 bucks.

What kind of clutch do you need for a 1965 Mustang?

Using most of the three-speed parts, like the bell-housing, flywheel, and clutch linkage, all that is needed is a new conversion clutch, adapter plate, T-5, cross member, and a few other supporting parts. No tunnel modifications are needed and the shifter location is retained. 1965 to 66 Mustang used a 2.77 3 speed with an 8.5″ clutch set.

What kind of engine does a 1966 Mustang have?

The mid-year 1966 Mustang was equipped with six-bolt blocks that carried through 302 and 5.0L HO of the ’90s. With this change comes the wide pattern “Top Loader” four-speed. If your Mustang is a manual shift, this conversion will cost less than the automatic conversion.

Can a T 5 Mustang be converted to 6 speed?

MDL has a complete conversion package to make this conversion easy. Our T-5 conversion kit includes hard-to-find items like a new inline six-cylinder flywheel, conversion clutch, we also offer a reproduction ‘easy to install’ clutch pedal and slip yoke or custom made driveshaft and everything in between.

Can a manual shift Mustang be converted to manual?

If your Mustang is a manual shift, this conversion will cost less than the automatic conversion. Using many of the OEM parts, like the bell housing with an adapter, the flywheel, clutch, and mechanical clutch linkage.